subcategorias
(terceiro nível de categoria)
Fabricante:
(Categoria: 109)
FEEDSTOCK TUBE length min.: 4000 mm lenght max.: 12000 mmMACHINE CHARACTERISTICS SWAGING force: 2000 kN stroke rate (max.): 740 /minPRODUCT (PROFILE, TUBE) external diameter min.: 30 mm external diameter max.: 127 mm wall thickness min.: 1.5 mm wall thickness max.: 11 mm length min.: 4000 mm lenght max.: 12000 mmcomplete line including hammer and tube handlinghammering length: 180-300 mmhammering time: approx. 15 secondstotal hammering time: approx. 21 seconds (incl. loading and unloading)production capacity: approx. 170 pcs/hinclusive:+ pipe adjustage GFU ZS-2000 kN+ various GFU hammer jaws (30-110 mm)
Precision air chuck Ø240mm (Type 9-500-6QC)Technology: APCRepeatability approx. 0.0015Jaw stroke 12mmconcentricity: approx. 0.005 mmbase jaw DRM 134-182mm- as new unused air chuckEquipment:- Jaw Ø 174 - 182mmUse of a high-precision pneumatic pull-down chuck with special jaws and workpiece stop. To ensure accuracy during jaw change and to realize the required set-up times, the chuck is equipped with the QC precision jaw change system. Replaceable module pins in the hardened special jaws take over the task of secure tooth flank contact.
CONTROLS PLC SIEMENS S7 300 SURFACE TREATMENT, USABLE PROCESS SPACE / ZONE length: 9000 mm width: 350 mmELECTRICAL SPECIFICATIONS total power consumption: 278 kW mains power supply: 450 kVA mains voltage: 400 V mains frequency: 50 HzDIMENSIONS / WEIGHTS space requirements -left/right-: 10300 mm space requirements -front/back-: 2500 mm total height: 2650 mm total weight approx.: 9000 kg3-lane system with 350 mm usable width eachProcess sequence:Stage 1: Cleaning (70 degrees)Stage 2,3,4,5: Rinsing (65, 60, 60, 55 degrees)Stage 6: Hot air drying (65 degrees)Oil separator: continuous oil discharge Heating: e ...
CONTROLS PLC SIEMENS S7 300 SURFACE TREATMENT, USABLE PROCESS SPACE / ZONE length: 7000 mm width: 1040 mmELECTRICAL SPECIFICATIONS total power consumption: 145 kW mains power supply: 267 kVA mains voltage: 400 V mains frequency: 50 HzDIMENSIONS / WEIGHTS space requirements -left/right-: 7400 mm space requirements -front/back-: 2350 mm total height: 2300 mm total weight approx.: 8000 kgContinuous conveyor belt 1040 mm wide, separated into 3 linesProcess:Stage 1: Cleaning (65 degrees)Stage 2,3,4: Rinsing (65, 60, 60 degrees)Stage 5: Heating air drying (60 degrees)Oil separator: continuous oil discharge Heating: electrical heating Conveyor belt: 1x wire ...
ELECTRICAL SPECIFICATIONS total power consumption: 30 kW mains voltage: 400 V mains frequency: 50 HzDIMENSIONS / WEIGHTS space requirements -left/right-: 3250 mm space requirements -front/back-: 1150 mm total height: 1510 mm total weight approx.: 700 kgChoclea type washing machine400 mm diameter
CONTROLS electronic controls ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 HzDIMENSIONS / WEIGHTS space requirements -left/right-: 1500 mm space requirements -front/back-: 1250 mm total height: 2100 mm- Polishing cell C710 (1970 houres in production)Equipment of the machine:Collaborative UR3 e-series robot with intuitive HMIAutomatic compensation for tool wearPolishing station Crevoisier C5100 (drive polishing tools)Spindle for holding standard Crevoisier colletsIntegrated suction with 14m/sRenishaw measuring probe for position detectionPalletizing for approx. 40 STK 2 Pal.Two polishing paste dispensers with a capacity of three liters each
CONTROLS PLC SIEMENS S7 FEEDSTOCK TUBE external diameter min.: 40 mm external diameter max.: 150 mm length min.: 260 mm lenght max.: 1500 mmELECTRICAL SPECIFICATIONS total power consumption: 155 kW mains power supply: 280 kVA mains voltage: 400 V mains frequency: 50 HzSystem consists of:+ FELSS AYIMUS H02-4NC precision axial forming machine, year 2007+ SONTEC PR 2290 shaft testing machine, year 2007+ BACHMANN BFH 4400 automatic palletizer, year 2007Exclusions from supply (even if visible on photos)- without chip breaker- without laser marking system
CONTROLS PLC SIEMENS S7 300 FEEDSTOCK TUBE external diameter min.: 59 mm external diameter max.: 100 mm wall thickness min.: 1.5 mm wall thickness max.: 3 mm length min.: 3000 mm lenght max.: 12000 mmPRODUCT (PROFILE, TUBE) length min.: 400 mm lenght max.: 1500 mmSystem consists of:+ ASMAG pipe cutting system+ HU 32-WS-HU3-SP250 forming system+ ABB stacking stationmax. bundle weight: 5'000 kgmax. bundle diameter: 800 mmABB robot working area: 4500 x 4100 x 2500 mm
CONTROLS PLC SIEMENS S7 FEEDSTOCK TUBE external diameter min.: 60 mm external diameter max.: 80 mm wall thickness max.: 25 mmPRODUCT (PROFILE, TUBE) length min.: 400 mm lenght max.: 1000 mmELECTRICAL SPECIFICATIONS total power consumption: 95 kW mains power supply: 200 kVA mains voltage: 400 V mains frequency: 50 HzSystem consists of:+ VAI SEUTHE TM90-3.0 cut-to-length line, YoM 2002+ BÜLTMANN tube bundle loader incl. cut-off head , YoM 1990 + FELSS axial forming system, YoM 1997+ Hydromation unloading system, YoM 1997Cycle time approx. 20 sec.max. diameter reduction: 30 mm
CHARACTERISTICS HEAT TREATMENT EQUIPMENT heating method: electric temperature min.: 420 °C temperature max.: 930 °C throughput, capacity: 6000 kg/hThroughput per Hour+ 420-680 degrees Celsius: 6000kg+ 830-930 degrees Celsius: 3200kg- Red tube storage racks next to the furnace not included
There are two identical eroding machines available, x-travel: 500mm, y-travel: 400mm, z-travel: 300mm, controls: ELOTRACE 3, operational hours counter: 56,600h. ... mais informação
X-travel: 520mm, z-travel: 800mm, turning table diameter: 800mm, length: 2440mm, width: 1150mm, height: 1760mm, weight: 1.3t, including tool cones and accessories, was maintained regularly. ... mais informação
Outer spring diameter: 5-16mm, wire thickness: 0.5-1.3mm, angle ratio: 6-18, max. throughput: 65/min, with documentation. ... mais informação
For melting and curing powder-coated parts, as well as drying and baking painted parts, max. charge weight: 500kg, operating temperature: 100-320°C, calorific value: 10kWh/m³, heating capacity: 90kW, internal dimensions: 2500x1200x1850mm, volume: 5.55m³, connected load: 8.075kW, length: 3800mm, width: 2700mm, height: 3100mm, with instruction manual, without spare parts or accessories.
There are three identical machines available, year of construction machine 1/ 2/ 3: 1994/ 1996/ 1997. ... mais informação
X-travel: 300mm, y-travel: 150mm, z-travel: 200mm, table dimensions: 350x450mm, controls: EROPULS 2002, length: 1200mm, width: 1200mm, height: 2000mm, weight: 1.4t, including documentation, without magnet clamping plate. ... mais informação
There are two identical polishing machines available, with accessories and documentation. ... mais informação
Length: 3100mm, width: 2350mm, height: 2474mm, weight: 4.8t, with documentation and filter system, without accessories, operating hours unknown, an on-site inspection is possible, the machine has not been used for several years, there is no one on site who can operate the machine. ... mais informação