máquinas de corte e de denteamento usadas para venda

max. wheel diameter: 180 mmgear width: 45 mmmax. module: 4 min. module: 0,5 stroke length max.: 0 - 52 mmspindle taper: innen MK 4 table diameter: 160 mmtable bore diameter: 75 mmno. of strokes: 355 - 630 Hub/minfeed range: 0,008 - 0,4 mm/Hubdimensions of the machine ca.: 2,30 x 1,50 x 2,36 mpower capacity: 6 kWweight of the machine ca.: 2.500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Wheel diameter - max. 320 mm Wheel width 50 mm Module - max. 7.5 Module - min. 2.1 Total power requirement 13 kW Machine weight approx. 7 t Space requirement approx. 1.7 x 1.9 x 2.7 m Tooth width max. 50 mm Adjustment range for hypoid wheels (offset) +/- 60 mm. Through-hole spindle pieces 78 mm. Dive max 20 mm. Cut feeds, infinitely variable 0.04 - 25 mm/min. Distance between taper tip/workpiece spindle... 100 - 345 mm. Distance between the centre of the cone and the cutter head axis 25 - 150 mm. Distance between the center of the taper and the milling head spindle... 80 - 220 mm. Max. ring wheel Ø at medium spiral angle... 320 mm. Max. gear ratio 1 : 9.5 Module 2.1 - 7.5 Outer cone spacing approx. 170 mm. Rapid traverse 1.5 m/min. Roll feeds in minutes of angle... 0,3 - 20 Spindle nose with short taper, inside 140 mm. Spindle nose with short taper, external 85 m ...

Under current  ... mais informação

workpiece dia.: 80 mmmodule: 2,5 mmfixture slide travel: 220 mmControl: Siemens - Sinumerik 840 D max. milling cutter diameter: 100 mmcutter length max.: 160 mmturning speed range: 200 - 5.000 U/mintable turning speeds: 3.000 U/minGear Hobbing Machine - Horizontal | GLEASON-PFAUTER - P60equipped with magnetic chip conveyor for dry and/or wet machining.Furnishing:- attached exhaust system for dry processing: Ringler,- Noise insulation for dry milling machine- with platform,- subindulgence,- subsequent loading and unloading handling: Epson - LS6-602S (built 2018),- sorting unit,- Calibration unit: Stotz, control: Siemens - HMI,- Work cell: Eagle AMZ, with workpiece tray,- position check,- exit conveyor belt,- Control cabinet, with cooling unit: Rittal- coolant device,- Automation unit: AMZ,The machine is in very good condition.For additional equipment information please referto the origin ...

MITSUBISHI GUIDELESS CNC GEAR SHAPER Model ST40A s/n will advise Condition; NEW Condition Delivered and installed July 2020 low hours Less than 1900 hours Machine was delivered and installed 3rd QTR of 2020 and has been hardly used. Customer is looking to sell due to limited work and project loss.machine is available for immediate inspection. Machine is equipped with all required features, Tailstock & Pinion support, chip conveyor and all options. Machine wont last contact us today Machine specifications to follow shortly: -Maximum diameter capacity 18" / 450 mm Option -Maximum DP/ module 3.175 DP/8 mod -Maximum work width 4.52" / 115 mm -Maximum cutter stroke 5.31" / 135 mm -Maximum helix angle + 45 deg -Cutter stroke 30-600 SPM -number of cuts 1-4 -Center distance from cutter Max/ Min 16.73" / -4.92" -Maximum radial travel 21.65" -Height of work table to spindl ...

Klingelnberg PFS600 Gear tester  ... mais informação

MAHR GMX 275 CNC GEAR TESTING MACHINE  ... mais informação

max. wheel diameter: 1200 mmgear width: 1000 mmmax. module: 25/36 Modulmin. module: 1 Control: Siemens 840 D PowerLinetable diameter: 1200 mmtable load: 15 ttotal power requirement: kWweight of the machine ca.: 24 tdimensions of the machine ca.: 6,5 x 4 x 3,75 mGleason-PFAUTER CNC hobbing machine P 1200 for gear cutting of cylindrical andworm gears worm gears and all other rolling profiles and shapes that regularly occur on the cylindrical workpiece circumference.Remark:Machine designed for external milling, large milling head M3. Machine withcounter stand.Scope of equipment:- Basic machine P 1200, Siemens 840D PowerLine (XP)- Motorised milling head M3 - Special speed series motorised milling head M3- Extended software for fault diagnosis - Main stand - raised 1000mm- Power clamping device - 2 x fume separator make 3nine type EMMA - Chip scraper conveyor- Set of adjustable wedges - Dia ...

max. wheel diameter: 1200 mmgear width: 350 mmmax. module: 16 min. module: 0,5 max. workpiece diameter: 1400 mmtable diameter: 1200 mmtable hole: 300 mmcontrol: Siemens 840D Powerlinetotal power requirement: 75 kWweight of the machine ca.: 24 tdimensions of the machine ca.: 5x3x3,8 mGleason-PFAUTER CNC gear shaping machine P 1200 S for the production of internally and externally cylindrical gears with internal and external teeth and other rolling profiles and moulds profiles and moulds that regularly occur on the cylindrical workpiece circumference and for the production of profiles in the single part process.Special version with hydraulic shaping head H1SCOPE OF EQUIPMENT:- Basic machine P1200S, Siemens 840D Powerline (XP)- Hydraulic shaping head H1- Signal light (3-colour)- Extended software for fault diagnosis- Telephone diagnosis system- Chip disposal through table bore- Set of adjus ...

max. workpiece diameter: 500 mmthreading length: 1250 mmmax. module: 12 min. module: 0,5 total power requirement: 8 kWweight of the machine ca.: 4,5 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... mais informação

max. workpiece diameter: 250 mmthreading length: 800 mmmax. module: 8 min. module: 1 total power requirement: 10 kWweight of the machine ca.: 3,5 tdimensions of the machine ca.: 3,05x1,75x1,60 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... mais informação

workpiece dia.: 100 mmmodule: 3.0 mmfixture slide travel: 400 mmControl: Siemens - Sinumerik 840 D max. milling cutter diameter: 80 mmcutter length max.: 180 mmturning speed range: 50 - 12.000 U/mintable turning speeds: 3.000 U/minGear Hobbing Machine - Horizontal | GLEASON-PFAUTER - P90equipped with magnetic chip conveyor for dry and/or wet machining.Furnishing:- attached extraction system: Ringler,- with platform,- subindulgence,- subsequent loading and unloading handling: Epson - LS6-602S (built 2018),- sorting unit,- Calibration unit: Stotz, control: Siemens - HMI,- Work cell: Eagle - AMZ, with workpiece tray,- position check,- exit conveyor belt,- Control cabinet, with cooling unit: Rittal- Workspace,- tailstock,- measuring device,- refrigeration system,- Industrial robots: Epson,- goods carrier,- conveyor belts,- control panel,The machine is in very good condition.For additional e ...

Gear hobbing machine 4000 mm Module 13 282  ... mais informação

cone distance (outside): 645 mmmax. gear pitch diameter: 650 mmnumber of teeth: 999 total power requirement: 99 kWweight of the machine ca.: 25 tdimensions of the machine ca.: 3 x 3 x 4 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... mais informação

hobbing length: 1750 mmmilling width: 260 mmmax. module: 10 table size incl. water gutter: 460 x 2100 mmtable clamping surface:: 250 x 1850 mmcutter width - max.: 100 mmfeed of the milling slide, stepless: 0 - 500 mm/min.rapid traverse feeds: 3000 mm/minmilling head -swivable +/-: 30 °Rotation speed range of milling head, in 9 steps: 29 - 178 rpmMilling head swivable 2 sides helical gearcutting: 30 °total power requirement: 4 kWweight of the machine ca.: 4 tdimensions of the machine ca.: 4 x 1,85 x 1,85 mAccessories:Change gearsMilling arborsOperating instructionsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

MAX DIAM 500, MAX MODUL 8 , MAX STROCE 125 , SINUMERIC 840 D  ... mais informação

Max. wheel diameter 420 mm gear width 120 mm Max. module 8 Min. module 0,5 control BWO CNC yes. of strokes 32-800 Hub/min total power requirement 50 kW weight of the machine ca. 9 t dimensions of the machine ca. 5.3 x 3.9 x 3.4 m  ... mais informação

Klingelnberg S-35 10-Axis CNC Gear Cutting Machine 10-AXIS CNC CONTROL SUITED FOR MEDIUM & LARGE SPIRAL BEVEL & HYPOID GEARS 23.6" MAXIMUM WORKPIECE DIAMETER DESIGNED HIGH DEPENDABILITY & PRECISION CONTINUOUS & SINGLE INDEXING OPERATIONS SPECIFICATIONS: MAXIMUM WORKPIECE DIAMETER 23.6" (600mm) SMALLEST NORMAL MODULE 0.137" LARGEST NORMAL MODULE 0.393" MAX TOOTH WIDTH 3.93" SMALLEST TRANSMISSION RATIO 1:1 LARGEST TRANSMISSION RATIO 1:10 SPIRAL ANGLE (DEGREES) 0-60 CUTTER HEAD SPINDLE: OERLIKON SHORT TAPER 1:4 0-5.118" SPINDLE SPEEDS (INF. VAR.) 30-350 MIN-1 SPINDLE TILT (DEGREES) 0-35 ECCENTRICITY 0-10.82" CUTTER HEAD RADIUS 3.46"-7.12" WORKPIECE SPINDLE OERLIKON OUTSIDE TAPER 1:4 0-8.85" INSIDE TAPER NO. 39, 1:19,692 6" MAX SPINDLE SPEED 0-160 MIN-1 BORE 0-6.29" AXIAL OFFSET +/-2.36" SWIVEL RANGE (DEGREES) -7 UP TO 90 FEEDS: GENERATING FEED ( ...

BEVEL GEAR SPIRAL GENERATOR  ... mais informação

Ref. -No.: 10103Manufacturer: MAAGYear of construction: 1976Type of control: KonventionellControl: N/AStorage location: HalberstadtCountry of origin: SchweizMinimum number of teeth: 6 Max. Number of teeth: 300 Serial no.: 4216 Gear width: 200 mmMax. Pile driving: 225 mmMax. Wheel Diameter: 750 mmMin. Wheel Diameter: 30 mmTable Diameter: 500 mmMax. Module: 10 mmMin. Module: 1 mmSpiral Angle: 0/60 °