Fabricante:
(Categoría: 1300)
Extrusion press with 400 mm , drive 55 kW, hard casting screw wings and pre-press PZSVG 40 (Built 1996, drive 15 kW), on 4 hydraulic spindles. Complete with 1 spare part set screw and reel. ... más información
Vibration sieves with exchangeable screen lining, screening surface: 450 mm x 300 mm, vibrator: 0,3 kW / 2.750 RPM, cast case with oval inlet. Prior use: Ceramic slurry screen (wet screening process). Several identical sieves available. ... más información
Glazing and cleaning booth in stainless steel, with KSB water pump 2,2 kW, suction fan 3.0 kW (incl. Exhaust tube 600 mm Ø), lighting, turntable and switchgear cabinet. Dismantled, ready for transport. ... más información
Steel box feeder with steel belt and combined drive unit for belt and windlass. Box dimensions: Ca. 2.000 mm x 750 mm x 500 mm high; incl. hopper on top with the following inlet dimensions: 1.600 mm x 1.200 mm x 360 mm high. Condition: Solid body; motor must be revised, part of belt needs to be greased / made flexible (due to standing time)
Extrusion press with 400 mm Ø, 55 kW drive, hard cast screw and pre press PZSVG 40 (built 1996, 15 drive), on 4 hydraulical posts. Complete, incl. 1 set spare parts (replacement screw and windlass). ... más información
Pressureless dust dilters für mounting on top of silos, material bunkers etc. in mild steel design. Equipped with 20 pcs. textile filter tubes (each 200 mm Ø x 2.000 mm long), incl. elektrical vibration device for cleaning. Filtering surface: Ca. 25 m². In very good condition, several filters available (identical).
Inclined lift with motorized winch (7.5 kW / 36 UPM), lifting bucket (1,000 l. usable volume), weighing frame / foot station (2,000 kg max.), 25 m rope and head station for material transfer. Rope and SEW winch drive are new; Elevator was used to feed an Eirich intensive mixer type R(V) 18. Technical documentation is available.
Swing mill for iron-free grinding or micronizing of chisels (solid sum content 70 - 78%), grinding chamber lined rubber, drive 22 kW. Task size: Up to 5 mm; final fineness: 4 microns. Last used grinding body: 7.5 to. Cylpebs, 20 mm x 20 mm (not included). ... más información
Robust rotary valve with inlet and outlet diameter 275 mm, drive via gear motor 0.25 kW / 35 UPM. Several identical locks available (Built between 2000 and 2007), very good condition, partly unused. ... más información
Inclined hoist system with electrically operated winch (7,5 kW / 36 RPM), bucket (1.000 l. net capacity), weighing frame / ground station (2.000 kg max.), 25 m rope and discharging station. Rope and SEW winch drive are new / unused. Hoist has been used with Eirich intensive mixer R(V) 18. Technical documentation is available.
Pipe conveyor screw with 270 mm diameter and 5,200 mm conveyor length (measured from center inlet to middle outlet). Drive 5.5 kW via intermediate gearboxes of gearbox construction north and claw coupling. Tree speed: 49 UPM; Spiral rise: 125 mm. ... más información
Pipe conveyor screw with 270 mm diameter and 5,000 mm conveyor length (measured from center inlet to middle outlet). Drive 5.5 kW via intermediate gearboxes of gearbox construction north and claw coupling. Tree speed: 49 UPM; Spiral pitch: 130 mm. ... más información
Pipe conveyor screw with 270 mm diameter and 2,900 mm conveyor length (measured from center inlet to middle outlet). Drive 5.5 kW via intermediate gearboxes of gearbox construction north and claw coupling. Tree speed: 49 UPM; Spiral pitch: 130 mm. ... más información
Stainless steel pipe screw with 250 mm diameter and 2,100 mm conveyor length (measured from mid inlet to middle outlet), inlet and outlet 270 mm each, with drive via intermediate gearbox and claw coupling. ... más información
Electro-mechanical scale for liquids, with Hottinger load cell, pressure control valve, pneumatic outlet valve and solenoid valve. In support frame with feet. ... más información
Totalent emptyer with hydraulically operated floor flaps over the entire length, drive 37 kW via Flender gearbox, incl. hydraulic unit with 4 kW for actuating the floor flaps and pneumatic flaps for filling from above. The micl is occupied with Becker shovels, the mixer has three flanges for retrofitting knife heads / choppers. Mixer, drive unit and hydraulic unit are mounted on a stable base frame; The scope of delivery also includes another frame for spring-supported vibration reduction.
Gross bar scale for filling open bags from 10 - 50 kg, with feed paddle screw incl. drive 1.1 kW for coarse and fine current dosing, with pneumatic sack clamp (200 mm) and automatic bag drop, mounted on an elastic stand frame. Last used for the filling of construction chemical products; good condition, last calibration in 2014.
Electro-mechanical scale for fluids, with Hottinger load cell, pressure valve, pneumatically operated slide valve and magnet valve. In base frame / stand. ... más información
Totalentleerer mit hydraulisch betätigten Bodenklappen Single-shaft ploughshare mixer with hydraulically perated discharging flaps (full length engagement), incl. 4 kW hydraulics aggregate for operating bottom flaps and pneumatic flaps om top for feeding. Mixer shaft is equipped wirh Becker shovels, mixer has 3 mounts for retrofitting choppers. Mixer, drive unit and hydraulics aggregate are mounted on solid base frame; included in scope of supply: Second base frame with spring-based vibration reduction system.
Batch horizontal mixer in standard steel version, lined inside with carbide, useful filling up to approx. 800 l.. Drive over 37 kW motor, Flender head gear and start-up clutch, equipped with 2 flanges for optional knife heads / choppers. Slingshot shaft with armoured Becker shovels (as good as new). Incl. basic frame for mixer, gearbox, fluid coupling and motor. Sandblasted and repainted.