mandrinadoras, centros de mecanizado usadas para la venta

x-travel: 600 mmy-travel: 500 mmz-travel: 400 mmcontrol: 432 spindle taper ISO: 40 turning speeds: 20-6000 U/minTool changer: 24 total power requirement: 35 kWweight of the machine ca.: 5,2 tdimensions of the machine ca.: 3,6x3x2,925 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1000 mmy-travel: 800 mmz-travel: 900 mmcontrol: HEIDENHAIN type: TNC 530 itnc mmrotary table dia.: 600 mmspindle taper: HSK 63 turning speeds: 18000 U/minworkpiece weight: 3000 kgTool changer: 30 Pos.: table - swivable: Gradtotal power requirement: . kWweight of the machine ca.: 12 tdimensions of the machine ca.: . mDEPO DYNAMIC 1009• X axis(milling unit/cross slide move across): 1,000 mm• Y-axis (crossbar moves lengthways): 900 (+170) mm• Z-axis (milling unit moves vertically): 600 mm• Feed / rapid traverse X, Y and Z axis: 40,000 mm/min• Acceleration X, Y and Z axis: 5 m/s2• Workpiece carrier – clamping surface (X/Y): 1,200 x 1,000 mm• Distance spindle nose / clamping surface: max. 750 mm• Main spindle 80 Nm, 30 KW (S1 / 100% duty cycle)- Electronic hand wheel• Chip disposal• Air supply through the inner spindle (ILZ)• Workroom enclosure complete wit ...

x-travel: 600 mmy-travel: 400 mmz-travel: 600 mmControl: Heidenhain type: 410 M mm: elktr. table surface area: 750x450 mmdistance spindle /table: 690 mmTable load: 500 kgspindle taper ISO: 40 Cooling through the spindle: barturning speeds: 9000 U/minspindle motor: 7,5 kWtotal power requirement: kWweight of the machine ca.: 3,2 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 5000 mmy-travel: 550 mmz-travel: 550 mmControl: Fanuc type: Series 15 M table surface area: 5000x520 mmTable load: 4000 kgquill stroke: 550 mmthroat: 580 mmdistance between table/spindle: 250-800 mmspindle taper ISO: 40 spindle turning speed range: 40-2000 U/minTool changer: 40 total power requirement: 55 kWweight of the machine ca.: 20 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 800 mmy-travel: 800 mmz-travel: 5000 mmcontrol: Siemens tool adaptor: ISO 50 number of spindle speeds: 285-3000 voltage: 380 Vtotal power requirement: 36 kWweight of the machine ca.: tdimensions of the machine ca.: mATC 40 positions2x workpiece holders with (2x) hydraulic supportThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1270 mmy-travel: 670 mmz-travel: 625 mmCNC-control: SIEMENS 840 D table-size: 1300 x 670 mmmax. table load: 1000 kgspindle taper ISO: SK 40 spindle turning speed range: 8000 U/minfeed stepless: 8000 mm/minrapid traverse: 36 / 36 / 30 m/mindrive capacity - spindle motor: 18,5 (15 min) kWtool change unit: 30 Pos.voltage: 380 Vtotal power requirement: 40 kVAweight of the machine ca.: 8,5 tdimensions of the machine ca.: 3,20 x 2,45 x 2,40 mchip conveyor: 4,10 x 0,65 x 1,50 coolant: 3,60 x 2,20 x 0,80 m- CNC Control Siemens 840D- INTERFACE FOR 4 AXIS+ 4 AXIS NIKKEN- HP COOLING TROUGHT THE SPINDEL 20bar- CHIP CONVOYERThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 4000 mmtable width: 3000 mmtable load: 60 ttotal power requirement: 14.3 kWweight of the machine ca.: 48.5 tdimensions of the machine ca.: mBrand: FXType: 83.300/400Used machineDigital readout: Heidenhain ND 780 Table length: 4.000 mmTable width: 3.000 mmTable load: 60 TMovement: 2.000 mmWidth T-slots: 58 mm (M30) mmFeeding: 4 - 1.500 mm/minRapid traverse: 4.000 mm/minPower: 14,3 kWMachine weight: 48.500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 3000 mmtable width: 2500 mmtable load: 40 ttotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mStocknumber 1210059Type of machine Rotary tableMake SCHIESSType 25/30Type of control X-stroke (mm) 2.000Table dimensions (mm) 3.000 x 2.500Table rotation (degrees) 360 Additional informationMax. tableload 40 tonThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2750 mmtable width: 2750 mmtable load: 80 ttotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mStocknumber 1210070Type of machine Rotary tableMake ASQUITHType 2750/80Build in NBType of control conventionalX-stroke (mm) 2200Table dimensions (mm) 2750 x2750 Additional informationmax. table load 80 tonThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2200 mmtable width: 2200 mmtable load: 16 tControl: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mStocknumber 1210063Type of machine CNC Rotary tableMake TOSType SK 16Build in nbX-stroke (mm) 1500 Additional informationTable size 2200 x 2200 mmmax. table load 16 toncontrolled by a machine with a Heidenhain TNC 426The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 2100 mmy-travel: 720 mmz-travel: 600 mmspindle taper: SK 40 turning speeds: 30 - 8000 U/minno. of workpieces in the magazine: 30 Stücktable surface area: 2800 x 650 mmtable load: 2500 kgtable height over floor: 900 mmrapid travel x/y/z: 30 m/minfeed speeds: X/Y/Z 0 / 30000 mm/mintotal power requirement: 25 kWweight of the machine ca.: 12000 kgdimensions of the machine ca.: 5500 x 3400 x 3100 mmCNC traveling column machining center HedeliusFurnishing:- HEIDENHAIN control TNC426- chip conveyor- Coolant system 350 / 2.5 bar- Working area hoodMachining values:- max. milling capacity: 600cm³/min- max. drilling Ø: 44 mm- max. thread Ø: M30operating hours:- control on = 68283 hours- machine on = 67782 hours- program run = 20891 hoursThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-axis: 6450 mmy-axis: 400 mmz-axis: 380 mmworking lenght: 6500 mmNumber of tools: 8 St.tool taper: BT30 tool changing time: 1,2 secdiameter of tools max.: 80 mmturning speeds: 6000 U/minFeed speed: X = 34 m/min.Feed speed: Y+Z = 18 m/min.total power requirement: 8,5 kWdimensions: 9800 x 3000 x 2400/3300 mmweight: 5400 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1300 mmy-travel: 500 mmz-travel: 570 mmspindle taper: SK40 spindle turning speed - stepless: 60 - 6000 U/minrapid traverse: x/y/z 7,5 m/minNumber of tools: 16 St.table surface area: 1500 x 400 mmworkpiece weight: 700 kgtotal power requirement: 12 kWweight of the machine ca.: 4100 kgdimensions of the machine ca.: 3800 x 3800 x 2800 mm- SIEMENS control SINUMERIK 828D- automatic tool clamping- Cooling device- automatic central lubrication- Chip tray- Full enclosure- Operation manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 800 mmy-travel: 700 mmz-travel: 610 mmControl: Siemens 828 D total power requirement: kWweight of the machine ca.: 8,7 tdimensions of the machine ca.: mONLY 2800 HOURS SPINDLE WORKSDescriptionThe QUASER MF vertical machining centres are highly versatile, offering high speed, high powered machining with 4+1 and full 5-axis machining capability along with large X-axis machines with a compact footprint. Superb build quality and stability for high volume production, toolroom and subcontract machining environments. SpecificationTable size 500mm diameterTravels – X/Y/Z axes 800 x 700 x 610 mmA Axis + 30 deg ~ -120 degC Axis 360 deg continousMaximum swing 630 mmTable surface to spindle nose -25mm ~ 585mmSpindle nose to tilting centre at 90 deg -25mm ~ 585mmMaximum work piece of size 630mm dia x 300mmTable load capacity 300kgSpindle taper BT40Spindle options 10,000 / 12,000 / 15,0 ...

bore depth: 8850 mmswing diameter: 1000/900 mmtotal power requirement: 129 kWweight of the machine ca.: 47 tdimensions of the machine ca.: mcore drilling diameter max.: mmCNC control Sinumerik 840Ddiameter of the face plate 1200mmsteady restchip conveyorTechnische Daten / technical details:Umlaufdurchmesser über Bett / rotary diameter over bed 1000 mmUmlaufdurchmesser in Rollenbock / rotary diameter at steady rest 900 mmMax. Bohrtiefe / max. drilling depth 8850 mmSpanndurchmesser Planscheibe / clamping diameter at face plate 900 mmDrehzahlbereich / spindle speed 1-300 U/minVorschubbereich / infeed 0,5-4500 mm/minAntriebsleistung / drive capacity 129 kWWerkstückabmessungen: / workpiece measures Min. Aussendurchmesser / min. outer diameter 150 mmMax. Aussendurchmesser / max. outer diameter 900 mmMax. Werkstücklänge / max. w ...

x-travel: 2940 mmy-travel: 700 mmz-travel: 850 mmControl: Siemens 840 D total power requirement: 75 kVAweight of the machine ca.: 16,5 tdimensions of the machine ca.: mTechnical specifications:Traverse X/Y/Z 2940 x 700 x 850 mmPendulum stroke with vertical spindle left/right 1170/1170 mmSpindle speeds 30 - 4000 rpm.AC hollow shaft motor, power 45 kW at 40% EDMax. torque 286 Nm at 40% EDTool holder SK 50Equipment:CNC control Siemens 840 DAutomatic CNC swivel head, B-axis under 2.5°directly programmable from X (-) 90° to X (+) 90°Locking via Hirth toothingTapping without compensating chuckCNC rotary tableMeasuring system Heidenhain, direct linearTool changer with 26 tool placesChip conveyorCoolant system with high-pressure pump and belt filter systemSpace requirements:Machine length 5800 mm + 1700 mm with chip conveyorMachine width 3300 mm plus control panelMachine height 3200 mmThe da ...

x-travel: 2360 mmy-travel: 600 mmz-travel: 800 mmControl: Siemens 840 D total power requirement: 69 kVAweight of the machine ca.: 16,5 tdimensions of the machine ca.: mUniversal machining center for 5-axis simultaneous machining.Technical specifications:Traverse X/Y/Z 2360 x 600 x 800 mmPendulum stroke with vertical spindle left/right 1160/700 mmTable clamping area 2750 x 600 mm with 4 T-slotsTool holder SK 50Spindle speeds 30 - 4000 rpm.Equipment:CNC control Siemens 840 D with Shop Mill DIN ISOCNC rotary table type RTA 3-520CNC swivel milling head infinitely variable positioningTool changer with 26 tool placesChip conveyorCoolant system with high-pressure pump and belt filter systemCoolant through spindle 20 barElectric hand wheelSpace requirements:Machine length 5650 mm + 1800 mm with chip conveyorMachine width 3500 mm plus control panelMachine height 3200 mmMachine without clamping v ...

working length X: 2.500 mmworking length Y: 1.300 mm: 4 - 80 mmNumber of milling agregates: 2 St.Number of boring motors: 2 St.: 72 : 16 : 4 : 90° schwenkbar : 130 m/min: 80 m/min: 50 m/min: 27 m/minturning speeds: max. 18.000 U/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 500 mmtable load: x ttable height: x mmspindle diameter: 0 mmx-travel: 500 mmy-travel: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... más información

Number of boring motors: 1 St.boring of corner bearing 1=yes, 0=no: 0 neinboring of olive 1=yes, 0=no: 1 jaThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... más información