Fabricante:
(Categoría: 206)
HOT PRESS Type COLOMBO REMO 6/90 heathed by water useful size plates mm. 3000 x 1300 n.06 cylinders diam.mm. 90 open mm. 450 hydraulic pump motor power Hp 3 Thrust 90 Ton Volt. 380/50 ... más información
MEMBRANE PRESS type FISMA 2200 x 1300 . usata useful size mm. 2200 x 1300 cover opening and closer by pneumatic pistons volt. 380/50 with separate vacuum system ... más información
Graf Koller sleeves punched for CPM 16-2.5 Pelletier press ... más información
Graf Kollerhülsen Geriffelt to CPM Pelletpress ... más información
In 2007 Floor press from BÃ?TFERING, type 4 H 100,. Lower piston design Pressing area of 1250 x 2200 mm Aluminium plates electrically heated Total pressure of 100 to Operating pressure 320 bar spec. Pressure 3.5 kg/cm2 with full interpretation spec. Pressure at 80% design 4.5 kg / cm2 Hydraulic power 380 volts, 50 Hz, 1.5 kW Press plates: 2 piece ELKOM electric heating Panel solid hard aluminum in the thermally stable sandwich construction for temperature applications up to 200 ° C 2200 x 1250 x 18 mm + 19 mm Mono Lux + 19 mm V 100 insulation plate 17,500 Watts, 400 volts, 3 Ph. Surface smooth, flat, screw-free, gold anodized Plate construction hides more-row from the bottom screwed maximum continuous temperature 200 ° C incl. 2 piece cooling plate in Sandwitchbauweise. This is mounted below the insulation. The heatsink must be with a cold ...
Description: Heavy series pellet mill, 380 volt power supply, 100 kg hourly productionApprox. Onsite Dimension. (l x w x h): 1,200 x 800 x 800 mm, weight approx.: 100 kg ... más información
Description: Heavy series pellet mill, 380 volt power supply, 100 kg hourly productionApprox. Onsite Dimension. (l x w x h): 1,200 x 800 x 800 mm, weight approx.: 100 kg ... más información
Description: Heavy series pellet mill, 380 volt power supply, 100 kg hourly productionApprox. Onsite Dimension. (l x w x h): 1,200 x 800 x 800 mm, weight approx.: 100 kg ... más información
Description: Heavy series pellet mill, 380 volt power supply, 100 kg hourly productionApprox. Onsite Dimension. (l x w x h): 1,200 x 800 x 800 mm, weight approx.: 100 kg ... más información
Description: Heavy series pellet mill, 380 volt power supply, 100 kg hourly productionApprox. Onsite Dimension. (l x w x h): 1,200 x 800 x 800 mm, weight approx.: 100 kg ... más información
Description: Vacuum membrane press with heating bonnet 200L vacuum vessel Vacuum output -0.85 bar 400Vserial number: F11011L, pressing width: 1,540 mm, pressing length: 3,880 mm, Approx. Onsite Dimension. (l x w x h): 4,500 x 1,900 x 1,300 mm, weight approx.: 450 kg ... más información
Description: serial number:  ,EUR/031/16 control: SIEMENS Simatic  , power: 5.5 kW max. working dimensions: ,2500 x 1500 x 650 mm min. working dimensions: ,250 x 200 x 650 mm length of entrance strip: 3000 mm press length: 4900 mm length of the output strip: 2500 mm connection power: 5.5 kW power of air connection: 6 bar serial number: EUR/031/16, control: SIEMENS Simatic, Approx. Onsite Dimension. (l x w x h): 5,000 x 3,000 x 2,000 mm, weight approx.: 2,500 kg
Description: • Finger joint assembly press • Maximum passage width approx. 290 mm • Maximum thickness approx. 80 mm • The machine consists of: • MAGGI VARIOFEED 4 4-roll feeder • Upper vertical clamping device • Movable cutting head for retesting: saw blade diameter 300 mm, 2.20 KW-3000 rpm motor • Pneumatic pressure deviceApprox. Onsite Dimension. (l x w x h): 5,600 x 1,750 x 1,400 mm, weight approx.: 700 kg
Description: 3 spindle press Distance between spindles: 750 mm  ,Approx. Onsite Dimension. (l x w x h): 2,750 x 1,350 x 2,500 mm, weight approx.: 1,300 kg ... más información
Description: 3 bars , Motor Power: 1.5 kw ,  ,Approx. Onsite Dimension. (l x w x h): 2,800 x 1,100 x 2,200 mm, weight approx.: 131 kg ... más información
Description: The EB-350-50 waste briquetting extruder is designed to produce briquettes with an octahedral cross-section size of 53 x 53 mm with a central hole. , The raw materials are sawdust, as well as buckwheat hulls, sunflower, rice. Parameter unit rev. value (extruder performance, up to depends on the type of raw material and its preparation) kg h 350 bulk density of the original raw material not less than 120 kg/m3 feed humidity 4-8 % feed fraction 2-8 mm briquette density not less than 1000 Kg/m3 process temperature • K ( C) 423-623 raw materials in the pressing area (150-350) installed power no more, inclusive. kW 46.4 kW electric motor of the main engine kW 37 electric motor feeder 2.2 kW electric heaters 7.2 kW electricity consumption for one hour of extruder, no more than 38 kWh specific consumption of 0.11 kWh electricity no more than global dimensions, no more than: ...
Description: Hydraulic Frame PressApprox. Onsite Dimension. (l x w x h): 3,840 x 1,710 x 2,900 mm, weight approx.: 2,000 kg ... más información
Description: Cabinet dimensions: Cabinet length- 300 - 2600 mm Cabinet height- 300 - 1350 mm Carcase width- 220 - 700 mm Pressing force: Horizontal- 1800 kg Vertical- 2300 kg Pressing elements: Vertical 7 pieces 150 x 50 mm Horizontal 6 pieces 150 x 50 mm Connection: 400 V 3 KWApprox. Onsite Dimension. (l x w x h): 3,800 x 1,000 x 2,400 mm, weight approx.: 2,200 kg