prensas usadas para la venta

HOT PRESS Type COLOMBO REMO 6/90 heathed by water useful size plates mm. 3000 x 1300 n.06 cylinders diam.mm. 90 open mm. 450 hydraulic pump motor power Hp 3 Thrust 90 Ton Volt. 380/50  ... más información

MEMBRANE PRESS type FISMA 2200 x 1300 . usata useful size mm. 2200 x 1300 cover opening and closer by pneumatic pistons volt. 380/50 with separate vacuum system ... más información

Koller sleeves punched for CPM 22-2.5  ... más información

Graf Koller sleeves punched for CPM 16-2.5 Pelletier press  ... más información

Graf Kollerhülsen Geriffelt to CPM Pelletpress  ... más información

Koller sleeves Geriffelt for CPM 22-2.5  ... más información

In 2007 Floor press from BÃ?TFERING, type 4 H 100,. Lower piston design Pressing area of 1250 x 2200 mm Aluminium plates electrically heated Total pressure of 100 to Operating pressure 320 bar spec. Pressure 3.5 kg/cm2 with full interpretation spec. Pressure at 80% design 4.5 kg / cm2 Hydraulic power 380 volts, 50 Hz, 1.5 kW Press plates: 2 piece ELKOM electric heating Panel solid hard aluminum in the thermally stable sandwich construction for temperature applications up to 200 ° C 2200 x 1250 x 18 mm + 19 mm Mono Lux + 19 mm V 100 insulation plate 17,500 Watts, 400 volts, 3 Ph. Surface smooth, flat, screw-free, gold anodized Plate construction hides more-row from the bottom screwed maximum continuous temperature 200 ° C incl. 2 piece cooling plate in Sandwitchbauweise. This is mounted below the insulation. The heatsink must be with a cold ...

Emergency stop line, control by button, steel plates, oil boiler heating system, receptacle for mylar foil---------- Technical Data ---------- pressing area: 3,000 x 1,300 mm, max. opening height: 400 mm, number of cylinders: 6 pieces, weight: 4,400 kg, dimensions: 3,700 x 1,800 x 2,100 ... más información

Emergency stop strip, control by button, gold anodized plates---------- Technical Data ---------- pressing area: 2,500 x 1,250 mm, max. opening height: 400 mm, Number of cylinders: 4 piecesSold as is, without technical inspection ... más información

press capacity:950 kNcontrol:Siemens S7 Required air-pressure:6 barloading area:1200 x 600 mmPressure power:1000 kNtotal power requirement:18 kWweight of the machine ca.:6200 kgdimensions of the machine ca.:2600 x 1300 x 3100 mm ... más información

Description: Heavy series pellet mill, 380 volt power supply, 100 kg hourly productionApprox. Onsite Dimension. (l x w x h): 1,200 x 800 x 800 mm, weight approx.: 100 kg ... más información

Description: Heavy series pellet mill, 380 volt power supply, 100 kg hourly productionApprox. Onsite Dimension. (l x w x h): 1,200 x 800 x 800 mm, weight approx.: 100 kg ... más información

Description: Heavy series pellet mill, 380 volt power supply, 100 kg hourly productionApprox. Onsite Dimension. (l x w x h): 1,200 x 800 x 800 mm, weight approx.: 100 kg ... más información

Description: Heavy series pellet mill, 380 volt power supply, 100 kg hourly productionApprox. Onsite Dimension. (l x w x h): 1,200 x 800 x 800 mm, weight approx.: 100 kg ... más información

Description: Heavy series pellet mill, 380 volt power supply, 100 kg hourly productionApprox. Onsite Dimension. (l x w x h): 1,200 x 800 x 800 mm, weight approx.: 100 kg ... más información

Description: Vacuum membrane press with heating bonnet 200L vacuum vessel Vacuum output -0.85 bar 400Vserial number: F11011L, pressing width: 1,540 mm, pressing length: 3,880 mm, Approx. Onsite Dimension. (l x w x h): 4,500 x 1,900 x 1,300 mm, weight approx.: 450 kg ... más información

Description: serial number:  ,EUR/031/16 control: SIEMENS Simatic  , power: 5.5 kW max. working dimensions: ,2500 x 1500 x 650 mm min. working dimensions: ,250 x 200 x 650 mm length of entrance strip: 3000 mm press length: 4900 mm length of the output strip: 2500 mm connection power: 5.5 kW power of air connection: 6 bar serial number: EUR/031/16, control: SIEMENS Simatic, Approx. Onsite Dimension. (l x w x h): 5,000 x 3,000 x 2,000 mm, weight approx.: 2,500 kg

Description: • Finger joint assembly press • Maximum passage width approx. 290 mm • Maximum thickness approx. 80 mm • The machine consists of: • MAGGI VARIOFEED 4 4-roll feeder • Upper vertical clamping device • Movable cutting head for retesting: saw blade diameter 300 mm, 2.20 KW-3000 rpm motor • Pneumatic pressure deviceApprox. Onsite Dimension. (l x w x h): 5,600 x 1,750 x 1,400 mm, weight approx.: 700 kg

Description: 3 spindle press Distance between spindles: 750 mm  ,Approx. Onsite Dimension. (l x w x h): 2,750 x 1,350 x 2,500 mm, weight approx.: 1,300 kg ... más información

Description: 3 bars , Motor Power: 1.5 kw ,  ,Approx. Onsite Dimension. (l x w x h): 2,800 x 1,100 x 2,200 mm, weight approx.: 131 kg ... más información