prensas usadas para venda

Veneer press Joos Moulding press Pressing area 2500 x 1100 mm Pressing surface can be divided into three surfaces Pressing surface then approx. 3 x 650 mm x 1100 mm Aperture 550 mm Pressing pressure 2 kg/cm² Without heating plates With heatable mould  ... mais informação

Dimensions of the press plate 50x100 cm You can also buy a copy cutter. The machine did not work in Lithuania. You can call or write to us. We can speak and write German and Russian. You can also send messages in English. We also have a lot of machines in stock.  ... mais informação

Plate press, gluing press, veneer press, splicing press, heating press, molding press -Handover: in the current condition as seen -Heating plates: the middle heating plate is defective -Manufacturer: Paul Ott, veneer press heatable type JU 80 -Drive: hydraulic -Heating capacity: 24 kW -Working area: 2550 x 1350 mm - Opening height: 400 mm -Dimensions: 3325 /1540/H1850 mm

Machine dimensions: 2900 x 1200 x 2000 mm Press dimensions: 2000 x 500 mm Press thickness: 20 – 350 mm Electric power: 14Kw/h, 40A Voltage frequency: 400V / 50Hz / 3P + N + PE Pressing power: 3200kg Production capacity: 1000 – 3000 m² per day Weight: 1000kg Mold weight: 100kg Emergency stop button: Yes

Description: The EB-350-50 waste briquetting extruder is designed to produce briquettes with an octahedral cross-section size of 53 x 53 mm with a central hole. , The raw materials are sawdust, as well as buckwheat hulls, sunflower, rice. Parameter unit rev. value (extruder performance, up to depends on the type of raw material and its preparation) kg h 350 bulk density of the original raw material not less than 120 kg/m3 feed humidity 4-8 % feed fraction 2-8 mm briquette density not less than 1000 Kg/m3 process temperature • K ( C) 423-623 raw materials in the pressing area (150-350) installed power no more, inclusive. kW 46.4 kW electric motor of the main engine kW 37 electric motor feeder 2.2 kW electric heaters 7.2 kW electricity consumption for one hour of extruder, no more than 38 kWh specific consumption of 0.11 kWh electricity no more than global dimensions, no more than:  ...

pressing area: 3000mm x 1350mm; opening: 400mm; heating: electric; plate surface: ALU - eloxiert; Emergency stop switch: yes; pressure: 115t; number of cylinder: 6; electricity: 57A; machine length: 3500 mm; machine width: 1500mm; weight: 5500kg;  ... mais informação

Working dimensions 250 cm x 110 cm You can call or write to us. We can speak and write German and Russian. You can also send messages in English. 31.3.2.  ... mais informação

Description: Pressure 80 to 200 tons, heating surface 1300 x 3500 mm, 6 cylinders in total, without CE certificate ,Approx. Onsite Dimension. (l x w x h): 4,300 x 1,500 x 2,300 mm, weight approx.: 6,000 kg ... mais informação

Description: A total of 6 cylinders, adjustable in height, without wood, with screw clamps approx. 15 pieces, without further accessories ,Approx. Onsite Dimension. (l x w x h): 2,500 x 1,200 x 2,000 mm, weight approx.: 380 kg ... mais informação

Description: Internal height min. 200 mm, max. 1350 mm Width min. 200 mm, max. 2500 mm Without CE certificate Voltage 400 V Pressure according to technical documentation up to 2000 kpApprox. Onsite Dimension. (l x w x h): 3,300 x 1,100 x 2,500 mm, weight approx.: 2,000 kg ... mais informação

Glue star or rotating gluing press Hess Rotor for gluing wood to form panels with 8 pressing surfaces (1,250 mm each). Incl. glue application machine and lots of inlay wood with different dimensions., working area: 2,500 x 1,100 x 80mm, pressing surfaces: 4 x 2, Pressing force: 20,000 N, Hold-down: 4 x 4

Veneer press Fabr. Bütfering Slabs size 2.3 x 1.3 m Electric 4 cylinders diameter 120 mm Hydraulic with safety leash  ... mais informação

Veneer press Ott Type: JU 65 Pressing surface 2250 x 1200 mm 2 electrically heated plates Total pressing pressure 65 tons Spec. Pressing pressure at full occupancy 2.4 kg/cm² Spec. Pressing pressure at 2 m² occupancy 3.25 kg/cm² Printing cylinder 4 x diameter 80 mm Rack and pinion guide Maximum opening between plates 300 mm Connection per heating plate approx. 6.0 kW Hydraulic pump approx. 1.1 kW Total connected load 12 kW Heating time approx. 20 min. Dimensions 2600 mm x 1330 mm x H 1760 mm Weight approx. 2800 kg

Wemhöner Wood Press Size : 250 cm x 120 cm Double table Machine is in a good working condition ... mais informação

SPECIFICATIONS: Working width: 3000 mm Working height: 2000 mm 03 Presses for vertical capping 02 Presses for horizontal capping Hydraulic machine  ... mais informação

I am selling a heavy briquetting press RUF RB440. Year of construction 11/2002 Motor power 30kW Productivity Number 400 pcs. wood briquettes / hour Wood briquette RUF 150 x 60 x 40-110mm (Depends on material) Material moisture up to 15% Nominal pressure 14200 N/cm2 Oil cooler included. Dimensions 3000 x 1800 x 2000 mm Total weight 3000kg Equipment on the right - right entry box. Condition after full remont/500Mtstd warranty like new. Available soon. With full documentation and CE.

Dresan 11 hot plate hydraulic press. Four pistons and 6 kg/cm2, automatic opening with timer or manual opening using a lever. Includes thermal and hydraulic oil. Circulation pump and thermometer. It works perfectly and can be viewed at any time. ... mais informação

Code: 0252 Brand: COLOMBO Model: 13/8 Presses (No. 2) suitable to bend different types of materials such as solid wooden strips and veneer - es: curved plywood, shells for chairs, seats, sofas, etc. - Equipped with with high-frequency generator The presses can work with mould and counter-mould or with steel-belt 1° Press Platen dimensions mm 1300 x 800 Opening mm 700 Thrust Piston diameter mm 150 Overall dimensions mm 2100 x 1000 x 2500 h 2° Press Platen dimensions mm 1300 x 800 Opening mm 700 Thrust Piston diameter mm 150 Overall dimensions mm 2100 x 1000 x 2500 h High frequency generator GIORDANO COLOMBO Overall dimensions mm 1100 x 1100 x 1900 h

Four-level gluing press Altec MVP 6/16 for pneumatically gluing solid wood workpieces in 8 positions including steel press attachments., workpiece length: max. approx. 2,500 mm, Workpiece width: max. approx. 800 mm, workpiece height: max. approx. 70 mm ... mais informação

Briquetting machine make Por series A 6 Complete with 36 sleeve filter, aspirator and connection ring to the machine Engine power HP 10 (kW 7.5) Briquette diameter 60 mm Maximum briquette length 50 mm with flat punch Number 14 cycles per minute Production 0.819 m3/h (+/- 10%) with maximum humidity 17% (purely indicative data which may vary based on the physical structure of the material) Dimensions: Height 1430 mm / Front 1660 mm / Depth 1100 mm / Weight 760 kg Inspection door with viewer Automatic start/stop level sensor Electromechanical panel