prensas usadas para venda

Wood pelletizing plant, KAHL pellet press used the complex includes: Pellet press AMANDUS KAHL Matrice diameter approx. 1000 mm Pallet diameter approx. Ø 8 mm 5 Koller approx. Ø 340 x 130 mm Motor power 160 kW an auxiliary motor is damaged, but can be replaced by us Dimensions approx. 1600 x 1800 x 3000 mm + motor Weight approx. 8000 kg Conditioner / Dosing and Mixing Screw Diameter approx. Ø 400 mm 5.5 kW Dimensions approx. 3100 x 900 x 800 mm Single shaft paddle mixer Dimensions approx. 3300 x 1600 x 2000 mm + gear motor Pellet coolers Dimensions approx. 2300 x 2300 x 3000 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.

Pellet mill for ring DIE and two roll shell system. Inside diameter: 900 mm Active operating width: 138mm Active forming area: 3902 cm² Press roll Ø440/142 optionally dimpled or notched Front door Stainless steel front door with large opening angle. pneumatic operated overload bypass protection gate. Two knives with step less length adjustments integrated in the door. Machine housing All housing parts are cut by precision laser. The machine base, the base plate and the housing are welded and reinforced. Drive Drive via 355 kW-1200 rpm engine , timing belt Ø200/1900 - Beltdrive Motor and Motor cables not included. Equipment Central lubrication for roll assembly and main shaft Manual roll adjustment Overload protection provided by a safety pin Die of chrome steel X46 Cr13 with conical seat for an easy change of the die - Die is not included Adj ...

Pellet press 3-5 tons hour 2006 but very little used of the brand PTN 1100 150-300 Dutch make very very sturdy and very good condition with some spare parts, sale due to project dissolution  ... mais informação

Collier sleeves Fishbone CPM 16-2.5  ... mais informação

Collier sleeve Fishbone CPM 22-2.5 for pellet press  ... mais informação

Graf Kollerhülsen Geriffelt to CPM Pelletpress  ... mais informação

Graf Koller sleeves punched for CPM 16-2.5 Pelletier press  ... mais informação

Koller sleeves punched for CPM 22-2.5  ... mais informação

Koller sleeves Geriffelt for CPM 22-2.5  ... mais informação

Code: 0797 Brand: VALENTINI MACCHINE - ITALY Model: 19 - 11 Pneumatic clamp desk for drawers, wooden elements , strip panels Technical data: Work table mm 1900 x 1100 Work table height mm 720 N° 4 positionable pneumatic pistons with adjustable stroke Positionable support squaring Compressed air 7 atm Overall dimensions mm 2050 x 1250 x 900 h Weight kg 850

Description ID U109.3 Status Active Price 100 € + VAT Year of manufacture 1985 Location Oradea (RO) Pneumatic press for wood labeling. ExWorks. Price is negotiable. Contact Tel.: +40-359/175.575 Fax: +40-259/426.248 Mobil: +40-743/177.040 ; +40-740/221.698 Technical inspection can be organized at least 24 hrs before the due date We speak English. Wir sprechen Deutsch. (+40-740/221.698 ) Hablamos Español. Beszélünk magyarul. (+40-743/177.040 ) Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervam dreptul la greseli, modificari si vanzare prealabila.

Machine for the postforming of laminate on rounded boardsUsefull length: 4200 mmPanel width: 200 - 1300 mmLaminate heating by infrared beamBending process by jig that is pneumatically loaded ... mais informação

The working width of the shafts is 1400 mm The shafts are heated with grease - Device COREMA TM/OH - 2036 S UL You can call or write to us. We can speak and write German and Russian. You can also send messages in English. 31.2.3  ... mais informação

Press for gluing wood with a feeder Steton PLA 2500x1300 shelf dimensions 2500 x 1300 mm six hydraulic cylinders with a diameter of 85 mm automatic glue applicator with pneumatic feed a four-section feeding table with the possibility of setting each section individually the ability to set the number of elements fed for each section element dimension min. 300 x 30 x 25 (LxWxT) mm element dimension max. 2500 x 160 x 40 (LxWxT) mm pressure max. shelves 260 bar pressure max. side pressure 120 bar pressure max. bumper 200 bar total power 11 kW temperature max. 120 ° roller feed speed from 5-60 m / min feeder speed 0-40 m / min adjustable speeds on the inverter roller receiving table 1400 x 2500 mm seven side hydraulic cylinders 1800 mm feeding conveyor electric heating of shelves cross feeding table 2500 x 1400 mm total length 588 cm total width 497 cm transport dimens ...

Approx. 50 pieces of press moulds for round elements Dimensions: 1000 mm x 1200 mm  ... mais informação

You can call or write to us. We can speak and write German and Russian. You can also send messages in English. 31.2.1.  ... mais informação

SPECIFICATIONS: Dimensions of the plate mm: 2300 x 1000 Number of pistons: 04 Piston diameter mm: 60 Water operation with boiler  ... mais informação

Technische Daten: - Arbeitsdruck 10 t- inklusive viele unterschiedliche Einsätze 1/2\", 3/4\", 1\", 1 1/4\", 1 1/2\", 2\"- für Wasser-, Gas od. andere Formrohre verschiedenster Materialien- selbstreinigender und wartungsarmer Zylinder- automatischer Kolbenrückzug- stabiler Stand durch drei Füße- aufklappbarer Rahmen zum einfachen und schnellen Einlegen des Rohlings- max. Kolbenhub: 155 mm- Abmessungen L=710 , B=590, H=220 mm- Bruttogewicht 48 kg- Nettogewicht 45 kg

Code: 0168 Brand: STROMAB Model: ST 3000 - CE Standard Rotating pneumatic clamping machine, suitable for planks in general, squared timbers, strips for forming panels, table tops, steps for stairs and coffin - CE Standard Motorized rotation with release pedal and handy control wheel for worktable rotation Working capacity 3000 x 1200 mm Nr. 9 pneumatic front pressers ( 3 each side) Nr. 18 vertical columns with cylinder, diameter 80 mm ( 6 each side) Nr. 3 Working stations Thrust of vertical cylinder 8 bar kg 400 Daily output (8 hours) m2 263 Mechanical safety barriers Overall dimensions : mm 4800 x 2850 x 2300 Weight kg 1100

- automatische Beschickung über Transportband- max. Presslänge 3100 mm- max. Werkstückbreite 100 mm- max. Werkstückhöhe 80 mm- max. Arbeitsdruck 7500 kg- Motor Hydraulikpumpe 4,0 kW- Motor Vorschub 0,75 + 1,1 kW- Motor Ablängsäge 2,2 kW- Spannung 50 Hz, 400 V- Gesamtleistung 9,15 kW- Drehzahl Säge 2800 U/min- Sägeblatt FI 350 mm, Bohrung 30 mm- Vorschubgeschwindigkeit 30 - 60 m/min- Druckluftbedarf 8 bar- Abmessungen L=4600,B=1400, H=1800 mm- Gewicht 2200 kg