rociadoras de cola usadas para la venta

Description: BRANDT KDF 660 Profiline with joint cutter and corner rounder PU glue (and hot melt glue) Workpiece preheating: IR preheating Edge material: 0.4 - 15.0 mm Max. width of edgebanding: max. 66 mm (at 1 mm band thickness) Edging material on the roll: Max. 6 mm to 45 mm, max.0.8 to 65 mm Workpiece thickness: Max. 8-60 mm Control: PC20+ Streckensteuerung with modem for teleservice 1. Joint milling 2. Chopping knife 3a. Pre-activation with IR heating 3b. Anti adhesive spray device 3c. Pre-melter, for quick change of adhesive 3d. Glue aggregate with glue application roller in follow-on or counterflow 3e. Program-controlled pressure zone 4. Capsaws - adjustable 0° - 15° 5a. Coarse milling (Bündig milling) -radial Milling units with 2-point adjustment, flat, phase radius up to 12 mm edge thickness 5b. Fine milling, with program-controlled adjustment for thickness, plane, phase or  ...

Description: Machine-nr.: 0-261-26-5028 Control: EC 10+ Speed-controlled control with optical start-stop indicator sensors Operating switch: ergonomic LCD switch mounted on the head Border thickness: 0.3 mm / max. 8.0 mm Band cutting device: 0.4 - 3.0 mm (Max. 3.0x30 mm / 1.0x55 mm) Band width edges: max. (1x) 55 mm / (3x) 45 mm Workpiece thickness: 8 - 50 mm . Workpiece width: min. 60 mm Workpiece overhang: min. 38 mm Performance: 11 m/min Workpiece pre-heating Roll magazine: Max. ø800 mm Cut-off shear: 3 mm Glue aggregate1: Hot melt granule Glue pot under glue output roller Gluing roller in travel or - in counterflow Glue aggregate 2: Airteq Hot-Air glue aggregate Pressure zone: Pneumatically driven (1st pressure roller, 2nd roller running freely ensures good compaction) Air supply units: (2x) 2.2 kW, 200 Hz Includes mounted DIA cutters Gluing unit: workpiece preheating Pressure zone ...

Equipment: - Gluing part for hot-melt adhesive granules - Cross-cut saw unit - Flush milling unit at the top and bottom - Scraper unit for PVC edges - Buffing unit 2 motors - Control panel at the machine inlet Specifications: Workpiece thickness 8 - 40 mm Workpiece width min. 60 mm Workpiece length min. 140 mm Edge thickness: Fixed lengths 0.4 - 3.0 mm max. (3 x 45 mm) Roll cutting 0.4 - 3.0 mm (max. 3 x 30 mm / 0.8 x 45 mm) Feed rate approx. 9 m/min. Electrical 400 V - 3 Ph. - 50 Hz Connected load 3.8 kW Compressed air connection 6 bar Weight approx. 860 kg Machine length approx. 3075 mm

Description: High-perfomance Edegbanding machine with PU-gluing and return conveying system. Worked only for approx. 1 year in single-shift workshop: infeed area with long infeed fence, 5-roller infeed unit and squared infeed table (500 x 500 mm) with controlled fence. Spraying unit for separating agent top/bottom. per-milling unit 2 x 4,5 kW ,incl. horizontal positioning controlled gluing unit with PUR-pre-melter BALTI Dual Pur. 2 times automatic glue-quantity dosing. 6-roll pressure zine, per-heating table pre-milling unit for premilling of edge projection on the top side snipping unit 2 x 600 W with automatic lateral scanning and pneumatic inclination 0 and 25° rough trimming unit 2 x 1,85 kW with HSK-25 retainer corner rounding unit KFA x30 - 0,5 kW mit HSK retainer multi profile scraping unit flat scraping unit buffing unit return conveying system Feddback 100 for max. workpie ...

Working width: 1300mm, roller diameter: 185mm, max. opening height: 100mm, working height: 800mm, power: 0.37kW. ... más información

Wood Her Perfect 1422 K + PU Heavy version up to 20 mm edge thickness Full car. Roller magazine - Chop shears Full car. Edge magazine for striped fabric CARTRIDGES + PU gluing station Flush caps Multifunction milling unit, flush - chamfer - radius milling with mech. Digital Setting Soundproof booth CE version Machine is WORKING IN GOOD CONDITION from stock Lieboch

Description: - Hot use of pre-glued strips for finishing linear and shaped panels - Main motor 3.95 kW - Accidental burn protection - Height adjustable edge guide - Rubber pre-tape roller - Double flat scrapers on both sides of the panel - Edge header - Edge thickness 0.8 - 2 mm - Min/Max panel thickness 12/43 mm - Working speed: 7 m/min The item that is delivered is NOT the one shown in the pictures, but an equal oneApprox. Onsite Dimension. (l x w x h): 2,000 x 670 x 1,260 mm, weight approx.: 470 kg

Description: Serial number 18465, with gluing unit, 4 vacuum cups, mounted on steel plate, with swivel armApprox. Onsite Dimension. (l x w x h): 3,500 x 1,200 x 3,500 mm, weight approx.: 500 kg ... más información

edge thickness: 0,5 - 3 mm, workpiece thickness: 10 - 45 mm, gluing unit: ja / yes, snipping unit: ja / yes, fine trimming unit: ja / yes, Approx. Onsite Dimension. (l x w x h): 3,500 x 1,500 x 1,800 mm, weight approx.: 700 kg ... más información

Description: main engine power: 1 kW serial number: 9915 pneumatically driven pressing length approx. 2500 mm tabletop approx. 2500 x 620 mm with electronic temperature control safety light barriers dimensions in mm: approx. 3200 x 1500 x 1900, weight in kg: approx. 1300 serial number: 9,915, Approx. Onsite Dimension. (l x w x h): 3,200 x 1,500 x 1,900 mm, weight approx.: 1,300 kg

Description: Flexline HOMAG PROFI KAL 330/6/A3/S2 edge banding machine  , , , serial number: 0-200-24-9153 is equipped as follows:  , , , HOMAG PROFI TBL 100/35/12 feed table with fully automatic workpiece feeding system WZ10 for workpieces with different dimensions in longitudinal and transverse direction Technical data: - Workpiece length 250 - 2500 mm - Electro-pneumatically controlled cross weigher - Air cushion table ( is not included in the scope of delivery )  , , , 2 HOMAG PROFI KAL 330/6/A3/S2 edge banding machine Technical data: - Universal trimming unit UF11, electro-pneumatically controlled  ,Note: the feedback is not included in the scope of delivery  ,serial number: 0-200-24-9153, workpiece thickness: max.60 mm, feed: 18-25 m/min, joint trimming unit: Ja/Yes, snipping unit: Ja/Yes, fine trimming unit: Ja/Yes, profile trim ...

Description: Bench size: 1190 x 370 mm Maximum edging height: 220 mm Total dimensions approx. (length x width x height) 1400x1100x1300Approx. Onsite Dimension. (l x w x h): 1,400 x 1,100 x 1,300 mm, weight approx.: 200 kg ... más información

Description:  , Serial number: 1157/0902 Feeder  ,1806 Plate diameter: 800mm Edge length: min 350 Thickness: 3 mm Max. height: 51 mm Gluing unit 1906 Workpiece thickness: 6-60 mm Workpiece length: 140 - 4000 mm Hot-melt cartridge : Diameter 60x80 mm Pressure unit 1912 Edge thickness: 3 mm Edge height: 51 mm Workpiece feed rate max. 11 m/min Big roller: 240 N Small roller: 80 N End trimming unit  ,1822 Edge section: 3x51 mm Edge excess: 200 mm Feed speed: 8 m/min Workpiece length: 140 mm Workpiece thickness: 45 mm Gap: 45 mm Workpiece spacing: 600 mm Turning range: 0-10°. Motor power: 0.22kw Revolutions per minute: 9000 min-1 Milling unit: 1825 Motor power:2x0.6kw Revolutions: 18000 min-1 Air consumption: 300 m3/h Edge scraper unit: 1964Approx. Onsite Dimension. (l x w x h): 3,060 x 950 x 1,500 mm, weight approx.: 900 kg

Description:  , Edge banding machine with glue tank , Glue tank capacity : 1 litre Feeder height numerical  ,indicator , End triming unit , Edge feeding unit , work surface height: 904 mm , Minimun panel size: Lenght: 180  ,mm Width: 65 mm ,  ,serial number: KK1 026432, return system: no, Approx. Onsite Dimension. (l x w x h): 2,000 x 900 x 1,400 mm, weight approx.: 350 kg

Description: Working Area  ,: 1750 x 350 mm Belt feed: Ø 600 mm Extensible table til 400 mm approx ,  ,  ,  ,feed: 5.5 m/min, gluing unit: yes, return system: no, total power approx: 3 kW, Approx. Onsite Dimension. (l x w x h): 1,750 x 1,000 x 1,350 mm, weight approx.: 135 kg ... más información

Description:  , Consisting as follows: Gluing unit Retesting group End trimming group Series: 160 Motor power: 0.75 kw Installed Power: 3.5kw Approx. Onsite Dimension. (l x w x h): 3,150 x 1,200 x 1,300 mm, weight approx.: 800 kg ... más información

Description: VIRUTEX EB 25 Unilateral edgebander Serial number 1872 For preglued edges Automatic feeding of the edge Total power installed 3.3 kW Workpiece thickness: min 11 mm - max. 65 mm Feeding speed 4.5 m/min Composition End trimming unit Edge trimming unit serial number: 1,872, Approx. Onsite Dimension. (l x w x h): 1,720 x 960 x 1,320 mm, weight approx.: 150 kg

Description: Serial Number: ,4661 For preglued edges Automatic feeding of the edge Total power 3.30 kw Worpiece thickness: min 11 mm - max. 65 mm Feed speed 4.50 m/min Snipping unit Rough trimming unit serial number: 4,661, Approx. Onsite Dimension. (l x w x h): 1,720 x 950 x 1,300 mm, weight approx.: 200 kg

Description: Serial Number: 4418 For preglued edges Automatic feeding of the edge Total power 3.30 kw Worpiece thickness: min 11 mm - max. 65 mm Feed speed 4.50 m/min Snipping unit Rough trimming unit  ,serial number: 4,418, Approx. Onsite Dimension. (l x w x h): 1,720 x 950 x 1,300 mm, weight approx.: 200 kg

Description: CEHISA EP-2 Manual edgebander Serial number 1770 Maximum gluing height: 60 mm Workpiece thickness from 10 mm up to 50 mm It does not have a shear to cut the edge ! Hot melt glueing unit Adjustable temperature from 50 to 300º Motor power: 0.25 HP Three-phase connection With wheels for easy transport  ,serial number: 1,770, Approx. Onsite Dimension. (l x w x h): 1,040 x 820 x 950 mm, weight approx.: 100 kg, Serial Number of Manufacturer: 1,770