subcategorías
(el tercer nivel de categoría)
Fabricante:
(Categoría: 207)
Zig - Zag Veneer Splicing Machine Kuper Type: FW-Pimus (special model) Year of construction 2008 Nominal current 4 A Voltage: 230 V Specifications: Stand projection: 920 mm Working height: 950 mm Veneer thickness: approx. 0.4 to 2.0 mm (also thick veneer) Feed in 3 stages: approx. 10 to 23 m/min 3 K heating system. The new temperature control ensures optimal melting results of the adhesive thread and thus ensures a perfect connection. Discus discs with tolerance compensation mechanism Electrically controlled thread tear-off roller new heating system with standstill control Frequency converter controlled drive Space requirement: approx. 1,400 x 560 x 1,470 mm Incl. accessories
Joining unit: Yes; Edge thickness: maximum 3mm; Workpiece thickness: from 8mm - 50mm; Workpiece width: minimum 110mm; Glue basins: granules, quick-change basins; Cross-cut scissors: yes; Caps / flush sawing: yes ; Milling Station: Bevel / Radius; Corner copying: yes; Flat - Scraper: Yes; Radius Scraper: Yes; Schwabbel: Yes; Anti-Adhesive Spray Unit: Yes; Infeed ruler adjustment: manual; Workpiece thickness adjustment: manual; Power consumption: 5 kW; Machine length: 3314 mm; Machine width: 1085 mm; Weight: 545 kg; Convenient and simple control of all important functions via control panel at the frontExcellent accessibility to the working units thanks to the large hood, which provides additional protection and noise reductionPrecise and proven units enable optimum machining and perfect finishing of the edgePre-milling unit equipped with two slide milling cuttersHigh-fr ...
pre milling unit: yes; edge thickness: max 3mm; workpiece thickness: 8mm - 50mm; workpiece width: min.110mm; glue system: granulat, quick-change glue pool; cutting knife: yes; cutting saw: yes; milling station: chamfer / radius; corner copy unit: yes; flat scrapper: yes; radius scrapper: yes; buffing unit: yes; anti-adhesive spraying unit: yes; inlet ruler adjustment: manual; workpiece thickness adjustment: manual; motor power: 5 kW; machine length: 3314 mm; machine width: 1085 mm; weight: 545 kg; Convenient and easy control of all important functions via control panel on the frontExcellent accessibility to the working units thanks to large hood, which provides additional protection and noise reduction.Precise and proven units enables optimum machining and perfect edge finishingJoining unit equipped with two slide cutters High-frequency motors for edge processing Stan ...
single-sided CNC edge processing machine, manufacturer: OTT, type: Storm+, year of manufacture: 2017, serial no.: H/321 75, connected loads: 24 kW / 400 V / 42 A / 50 Hz, CNC control BECKHOFF, touch screen, automatic return unit OTT Translift+, year of manufacture: 2017, no.: TS/81075, belt conveyor, return belt conveyor belt FOURTEC SFB 90/110, conveying speed: 40 m/min, 1 roller conveyor at working height approx. 300 cm, various roller conveyors, mobile edge magazine, various cabinets with accessories, Hot Melt Gluing Unit OTT 40456C01V2, Year of manufacture: 2016, No.: CMS/207, 5.9 kW
Brought from Germany. The machine did not work in Lithuania. You can call or write to us. We can speak and write German and Russian. You can also send messages in English. ... más información
Description: Workpiece: Workpiece thickness: min. 6 mm, max. 45 mm Workpiece width: min. 60 mm Workpiece length: min. 180 mm Maximum edge thickness: 3 mm Drive: Feed rate: 10 m/min Power: 1.5 kW Control voltage: 24 VDC Compressed Air: Operating pressure: 6 Bar Limit pressure: 8 Bar Connection: Quick coupling, nominal width 7, hose inner diameter at least 12 mm. Air consumption: 5 L/min Machine comes without RETURN ,serial number: 98/1-003, Approx. Onsite Dimension. (l x w x h): 5,335 x 1,670 x 1,415 mm, weight approx.: 3,000 kg
Compact and mobile edge banding machine Bi-Matic 4.5 Starter Plus for gluing and processing edge material Including extensive supplies of glue and edge material., Aggregate: 4, Aggregate 1: Caps, Aggregate 2: Round, Aggregate 3: Pulling blade, Aggregate 4: Babble ... más información
Description: Number of rollers: 2, roller length 1330 mm, roller diameter approx. 200 mm, voltage 380 volts, without additional accessories, without CE certificateApprox. Onsite Dimension. (l x w x h): 1,900 x 900 x 1,500 mm, weight approx.: 300 kg ... más información
Description: - Edge banding machine - Serial number 37082 - Total installed power 32 KW - Edge thickness in strips up to 20 mm - Edge thickness in the roll from 0.30 mm to 3 mm - Workpiece thickness from 10 mm up to 60 mm - Adjustable feed speed from 10 m/min up to 24 m/min - Feed motor 5.50 KW - Motorized height adjustment - CNI control - Joint cutting unit, 2 x motor - Edge feeder for strips and roll, edge magazine for one edge roll - NORDSON MC 12 gluing unit for PUR adhesive - Pressure unit with (1+6) rollers - Snipping unit, 2 x motor - Rough trimming unit, 2 x motor (upper motor missing) - Fine trimming unit, 2 x motor 0.65 KW-12000 rpm - Profile trimming unit, 2 x motor - Profile scraper unit - Trimming unit swivels from 0° to 90°, motor 3 KW-3000 rpm - Flat scraping unit - Edge buffing unit, 2 x motor - Hot air blower unitApprox. Onsite Dimension. (l x w x h): 10,700 x 1,250 x ...
Description: - Edge banding machine - Serial number 02352 - Total installed power 21 KW - Edge thickness from 0.40 mm up to 12 mm - Workpiece thickness from 10 mm to 45 mm - Minimum workpiece length 150 mm - Feed motor 2.20 KW - Control system - IMA 08.376 joint trimming unit, 2 x motor 3 KW-12000 rpm - IMA 283.08 Gluing unit with pot for granulated hot melt adhesive - Pressure unit with (1+5) rollers - IMA 08.415 Cross-cut unit, 2 x motor 0.66 KW-11100 rpm, swivels up to 8° - IMA 08.0555 Rough trimming unit, 2 x motor 1.80 KW-12000 rpm (upper motor missing) - IMA 08.346 Profile trimming unit, 2 x motor 0.50 KW-18000 rpm - IMA 08.519 Profile scraper unit - Flat scraping unit - Milling unit, motor 2 KW-12000 rpm - IMA 08.612 Edge buffing unit, 2 x motor 0.25 KW-1320 rpm IMPORTANT: The return system shown in the photos is NOT included in the scope of deliveryApprox. Onsite Dimension. (l ...
Description: • Edgebander, edge banding machine • Edge thickness from 0.40 mm up to 25 mm • Worpiece thickness from 6 mm up to 60 mm • Minimum workpiece lenght 140 mm • Minimum workpiece width 60 mm • Adjustable feed speed from 8 m/min up to 20 m/min • Feed motor 4.40 KW • HOLZ-HER 1961 joint trimming unit, 2 x motor 2 KW-12000 rpm • Edge feeder for 1 edge coil, edge magazine for 1 edge coil • HOLZ-HER 1907 cartridge glue system with pot for granulated hot melt adhesive • HOLZ-HER 1926 K pressure group with (1+2) rollers • HOLZ-HER 1819 snipping unit, 2 x motor 0.45 KW-12000 rpm • HOLZ-HER 1962 rough trimming unit, 2 x motor 2 KW-12000 rpm • HOLZ-HER 1934 lower profile trimming unit, 2 x motor 0.45 KW-12000 • HOLZ-HER 1933 upper profile trimming unit, 2 x motor 0.45 KW-12000 • HOLZ-HER 1927 profile scraping unit • HOLZ-HER 1964 flat scraping unit • HOL ...
Description: • Edgebander • Edge thickness from 0.40 mm up to 25 mm • Worpiece thickness from 6 mm up to 60 mm • Adjustable feed speed: 8 m/min - 20 m/min • Control • Joint trimming unit, 2 x motor 2 KW-12000 rpm • Edge feeder for strips and roll, edge magazine for one edge coil • HOLZ-HER 1906 cartridge glue system • Pressure group with (1+2) rollers • End trimming unit with 2 motors • HOLZ-HER 1823 fine trimming unit, 2 x motor 0.60 KW-12000 rpm • Profile scraping unit • HOLZ-HER 1983 profile trimming unit • Edge buffing unit • Milling group, motor 3.80 KW-12000 rpm • Sanding belt unitApprox. Onsite Dimension. (l x w x h): 7,550 x 1,150 x 1,900 mm, weight approx.: 4,000 kg
Description: • Edgebander with return system • Serial number 10347 • Edge thickness in strips up to 12 mm • Edge thickness in roll up to 3 mm • Worpiece thickness up to 40 mm • Adjustable feed speed from 5 m/min up to 25 m/min • Feed motor 5.50 KW • Joint trimming unit, 2 x motor 3 KW • Edge feeder for strips and roll, edge magazine for 6 edge coils • Gluing unit for PUR glue • Pressure group with (1+5) rollers • End trimming unit, 2 x motor • Rough trimming unit, 2 x motor 1 KW • Profile trimming unit, 4 x motor • Profile scraping unit • Flat scraping unit • Edge buffing unit • Milling group • Return system with inclined air table and dimensions 2020 x 1000 mm, motorized belt conveyor with useful dimensions 9000 x 1200 mm, inclined roller conveyor with dimensions 2500 x 1200 mmApprox. Onsite Dimension. (l x w x h): 12,275 x 3,800 x 2,570 mm, weight ...
Description: • Edgebander • Serial number 14589/9-810 • Total installed power approx. 9 KW • Edge thickness from 0.40 mm up to 8 mm • Worpiece thickness from 6 mm up to 45 mm • Minimum workpiece lenght 180 mm • Minimum workpiece width 60 mm • Feed speed 11 m/min • Feed motor 0.75 KW • Control • HOLZ-HER 1902 edge feeder for roll, edge magazine for one edge coil • HOLZ-HER 1906 cartridge glue system • HOLZ-HER 1913 pressure group with (1+2) rollers • HOLZ-HER 1976K end trimming unit, 2 x motor 0.22 KW-9000 rpm • HOLZ-HER 1942M fine trimming unit, 2 x motor 0.60 KW-9000 rpmApprox. Onsite Dimension. (l x w x h): 4,000 x 1,450 x 1,250 mm, weight approx.: 1,000 kg
Description: • Edgebander • Serial number 147/9-909 (1999) • Edge thickness in strips up to 13 mm • Edge thickness in roll from 0.30 mm up to 5 mm • Worpiece thickness from 6 mm up to 45 mm • Minimum workpiece lenght 180 mm • Minimum workpiece width 60 mm • Feed speed 11 m/min • Feed motor 1.50 KW • PLC control system • HOLZ-HER 1902 edge feeder for roll, edge magazine for one edge coil • HOLZ-HER 1906 cartridge glue system • HOLZ-HER 1913 pressure group with (1+2) rollers • HOLZ-HER 1918 end trimming unit, 2 x motor 0.35 KW-9000 rpm, tilting up to 10° • HOLZ-HER 1942 M fine trimming unit, 2 x motor 0.60 KW-9000 rpm, tilting up to 15° • HOLZ-HER 1929 profile scraping unit • HOLZ-HER 1940 edge buffing unit, 2 x motor 0.12 KW-1640 rpmApprox. Onsite Dimension. (l x w x h): 4,200 x 1,200 x 1,750 mm, weight approx.: 2,000 kg
Description: • Edgebander • Serial number 2697 • Edge thickness in roll from 0.40 mm up to 3 mm • Worpiece thickness from 8 mm up to 40 mm • Feed motor 0.37 KW • Edge feeder, edge magazine for one edge coil • Gluing unit with pot for granulated hot melt adhesive • Pressure group with (1+2) rollers • End trimming unit • Fine trimming unit, 2 x motor 0.36 KW-12000 rpm, tiltingApprox. Onsite Dimension. (l x w x h): 2,800 x 980 x 1,450 mm, weight approx.: 700 kg
Single-sided automatic edge banding machine with joining unit, hot melt adhesive specification for straight workpieces (EVA-PUR glue basin with outlet function optional), HF cross-cut saw station, HF milling unit, chain feed, double roller top pressure, extendable workpiece support rail and signal lamp for workpiece sequence. For ABS, PVC, melamine and thick wood veneer roll material, as well as fixed lengths from 0.4 – 3.0 mm and from 8 – 50 mm workpiece height.
Description: BRANDT KDF 660 Profiline with joint cutter and corner rounder PU glue (and hot melt glue) Workpiece preheating: IR preheating Edge material: 0.4 - 15.0 mm Max. width of edgebanding: max. 66 mm (at 1 mm band thickness) Edging material on the roll: Max. 6 mm to 45 mm, max.0.8 to 65 mm Workpiece thickness: Max. 8-60 mm Control: PC20+ Streckensteuerung with modem for teleservice 1. Joint milling 2. Chopping knife 3a. Pre-activation with IR heating 3b. Anti adhesive spray device 3c. Pre-melter, for quick change of adhesive 3d. Glue aggregate with glue application roller in follow-on or counterflow 3e. Program-controlled pressure zone 4. Capsaws - adjustable 0° - 15° 5a. Coarse milling (Bündig milling) -radial Milling units with 2-point adjustment, flat, phase radius up to 12 mm edge thickness 5b. Fine milling, with program-controlled adjustment for thickness, plane, phase or r ...
Pneumatic gun, 2 component gun, multifunctional gun, cartridge gun, pneumatic cartridge gun, pneumatic cartridge gun, cartridge press-Manufacturer: Festo, pneumatic cartridge gun-Cartridge length: 212 to 218 mm-Cartridge diameter: 45 to 50 mm-Inlet pressure: max. 10 bar-Accessories: see photos-Box dimensions: 600/260/H100 mm-Weight: 2.5 kg
Edge banding machine Felder G480 The following units are available: Cutting, joining, flush milling, corner rounding, scraper blades, surface scraping blades Year of construction 2016 The machine is in top condition, ready for operation. Subject to changes, errors and prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax 0041 62 966 21 12