Fabricante:
(Categoría: 2500)
Description: including base frameApprox. Onsite Dimension. (l x w x h): 850 x 330 x 1,070 mm, weight approx.: 150 kg ... más información
Description: Full load capacity 10 t, working pressure 52 mPaApprox. Onsite Dimension. (l x w x h): 320 x 250 x 330 mm, weight approx.: 32 kg ... más información
Description: Industrial chiller Serial number 3620670001 Maximum water pressure: 6 bar Maximum water temperature: 30º C Ambient temperature: 5ºC to 45ºC Refrigerant type: 407C Power 48 kW 400 VApprox. Onsite Dimension. (l x w x h): 3,060 x 1,290 x 2,240 mm, weight approx.: 1,500 kg ... más información
Description: Serial number 070830135, fuse 16 AApprox. Onsite Dimension. (l x w x h): 760 x 630 x 1,450 mm, weight approx.: 50 kg ... más información
Description: Lifting beam Serial number 57.676.2 Maximum load capacity: 8.000 Kg 7 positions per side Distance between positions: 160 mm Manual positioning Shackles and chains includedApprox. Onsite Dimension. (l x w x h): 2,900 x 450 x 800 mm, weight approx.: 300 kg ... más información
Description: Lifting beam Serial number 57.677.2 Maximum load capacity: 10.000 Kg 7 positions per side Distance between positions: 160 mm Manual positioning Shackles and chains includedApprox. Onsite Dimension. (l x w x h): 2,900 x 500 x 800 mm, weight approx.: 300 kg ... más información
Description: Lifting beam Serial number 57.677.1 Maximum load capacity: 10.000 Kg 7 positions per side Distance between positions: 160 mm Manual positioning Shackles and chains includedApprox. Onsite Dimension. (l x w x h): 2,900 x 500 x 800 mm, weight approx.: 300 kg ... más información
Description: Lifting beam Serial number 57.677.3 Maximum load capacity: 10.000 Kg 7 positions per side Distance between positions: 160 mm Manual positioning Shackles and chains includedApprox. Onsite Dimension. (l x w x h): 2,900 x 500 x 800 mm, weight approx.: 300 kg ... más información
Description: Collecting volume 1110 litres, load capacity 1300 kg, serial number 1478/09, with digital flow meterApprox. Onsite Dimension. (l x w x h): 1,750 x 1,160 x 1,420 mm, weight approx.: 200 kg ... más información
Description: Manual monorail system , Pneumatic switch points 2x jib crane with lifting capacity 250 kg incl. GIS electric chain hoist 4x travelling crane with lifting capacity 250 kg incl. GIS electric chain hoist 4x drop section Floor area: approx. 65 x 30 metres Structure height: approx. 4.5 metres Approx. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 1 kg
Description: Collection volume 200 l, without additional accessoriesApprox. Onsite Dimension. (l x w x h): 800 x 800 x 600 mm, weight approx.: 60 kg ... más información
Hydraulic pump from injection molding machine in 90% condition. The pump is fully functional and can be installed immediately. Please see my other ads. ... más información
Description: Load capacity 5000 kgApprox. Onsite Dimension. (l x w x h): 2,100 x 1,100 x 1,920 mm, weight approx.: 200 kg ... más información
Description: Fabrication number: 07620 Load capacity: 640 kgApprox. Onsite Dimension. (l x w x h): 450 x 400 x 500 mm, weight approx.: 50 kg ... más información
Description: Fabrication number: 07619 Load capacity: 1100 kgApprox. Onsite Dimension. (l x w x h): 600 x 500 x 500 mm, weight approx.: 150 kg ... más información
Vibration machine for drying and sieving of sand. The machine consists of a welded construction mounted on conveyor elements, with 2 Electric Vibrators as drive. An electric heater with built-in blower is located at the end of the conveyor belt. Below the conveyor trough a sieve box is mounted in the area of the sand outlet. The dynamic forces that are emitted from the machine to the ground only about 100 N amount due the shock mount on the spring elements. The amplitude and therefore the flow rate can be set by adjusting the unbalances on the motors. The machine is due to the simple design nearly stör - and maintenance-free. The static frequency converter has a range of 10 to 32 Hz Length: 3.5 m Width: 1.2 m Height: 1.4 m Weight: 220kg
Atec stainless alginator serial: C10030 - 02 2009, 70Kg, digital timers and temperatures, high shear mixer, electrically heated, on stainless mobile skid ... más información
Qty. 1 Second-hand laser tube wall thickness measurement unit Mfc.: MSG Maschinenbau GmbH Built: 2009 Determination of wall thickness using laser technology. Max. loupe dia.: 85 mm (can be modified) Wall thickness: 11 – 14 mm Loupe length: 250 – 600 mm Operation speed: 1.3 m/sec. Power: 6.5 kW, 400 V, 21 Amps., 50 Hz Air pressure: 6.0 bar Scope of supply: Removal device Feeder Saw inlet channel Vertical drivers Vertical & horizontal straightener Heavy-duty metal circular saw Blow-out and suction device Weighing device (calculation) Catchments Loupe crane Suction unit Hydraulic aggregat Collection stand
This Rapid G500-60KU, manufactured in 2009, features a grinding chamber opening of 450x600 mm, and is equipped with a rotor speed of 430 1/min. It includes a robust 37 kW drive motor and comprehensive starting equipment with a Star-delta circuit. Ideal for intensive grinding tasks in plastics processing, the Rapid G500-60KU machine we have for sale ensures efficient material handling. Reach out for more information about this machine.
Available in stock 1 x NEVER USED Air Liquide Pressure Regulator DCn 300/3 Suitable for all industrial gases, including oxygen, acetylene and propane. Non corrosive and toxic gases excepted. The equipment was never used and is still inside the original packing. Maximum Flow Rate: 350 Nm3/h (N2) Maximum Inlet Pressure: 50 bar Adjusting Outlet Pressure: 1 to 18 bar