máquinas injetoras usadas para venda

Manufacturer Demag Type Ergotech 100-310 System NC4 Control NC 4 Built in 1995 Closing unit Closing force t 100 Opening path mm 500 Holm size mm 400 x 400 Installation height min/max mm 250/- Plate size 540 x 540 Spraying unit Screw diameter mm 35 Spray volume cm3 168 Spray weight gr 152 Spray pressure bar 168 Dimensions and weights Dimensions LxWxH m 4.1 x 1.3 x 1.8 Machine weight Kg 3820 Other

Manufacturer Demag Type Ergotech 100-310 System NC4 Control NC 4 Built in 1995 Closing unit Closing force t 100 Opening path mm 500 Holm size mm 400 x 400 Installation height min/max mm 250/- Plate size 540 x 540 Spraying unit Screw diameter mm 35 Spray volume cm3 168 Spray weight gr 152 Spray pressure bar 168 Dimensions and weights Dimensions LxWxH m 4.1 x 1.3 x 1.8 Machine weight Kg 3820 Other

Manufacturer Engel Type 330-80 HL Control EC 88 Built in 1995 Closing unit Closing force t 80 Opening path mm 450 Holm size mm 710 x 420 Plate size 660 x 560 Spraying unit Screw diameter mm 35 Spray volume cm3 154 Spray weight gr 140 Spray pressure bar 1600/2200 Dimensions and weights Dimensions LxWxH m 4.2 x 1.3 x 2 Machine weight Kg 5300 Other Euromap 12

DR. BOY 50M YEAR 1995 SCREW 32 mm 50 ton CLAMPING FORCE ... mais informação

1K 65 Tons Min Mould height - 260 Max Moul Height - 400 distance btw columns - 400 opening stroke 730 valve gates - 1 Max Shot Weight - 142 ... mais informação

Description: Serial number: 28619, weight: 44,000 kg, Injection unit: Screw diameter 90 mm, metering stroke: 390 mm, screw speed 5-125 r/min, plasticizing flow: 80 g/s, injection flow: 442 g/s, max. stroke volume: 2,481 cm³, max. injection weight: 2,233 g, specific injection pressure: 1,300 bar, nozzle stroke: 600 mm, nozzle contact force: 150 kN, heating power: 56 kW, number of heating zones INC.nozzle 6, weight of injection unit: 11 t Clamping unit: Clamping force: 3,500 kN, clamping force: 3,850 kN, opening stroke: 700 mm, ejector force: 70 kN, ejector stroke: 240 mm, mold installation height max. 880 mm, min. 300 mm, ramp platen total size: 1,640 x 1,640 mm, tie bar diameter: 140 mm, weight of clamping unit: 33 t, oil filling: 580 l, Equipment: toggle lever equipment Note on condition: all peripherals possibly visible in the photo, such as robot arm, etc., are not included in the  ...

with Sepro robot - Distance between tie-bars (h x v): 640 x 625 mm - Screw diameter: 55 mm - Shot weight max: 595 g - Injection rate: 310 cm?/s - Injection pressure: 1.906 bar - Injection volume: 614 cm? - Screw speed: 318 rpm - Screw L/D ratio: 23,5 - Clamping force: 2.750 kN - Mould opening stroke max: 580 mm - Mould height max: 640 mm - Mould height min: 200 mm - Daylight between platens max: 1.220 mm - Platen size (h x v): 935 x 920 mm - Control: CINCINNATI MILACRON CAMAC 486 - Power: installed max: 32 kW - Dimensions (long x wide x high): 7.500 x 1.510 x 2.377 mm - Weight: 11.698 kg

Arburg 320M 750-90 Year of construction: 1996 Injection unit: Screw diameter: 25 mm Injection weight: 26 g Injection pressure: 2500 bar Dosing volume: 31 ccm Clamping unit: Clamping force: 75 t Tie bar spacing: 320x320 mm Size of clamping plates: 490x490 mm Ejector: hydraulic Clamping unit: hydraulic Control: MULTRONICA Additional equipment: Air valve x 1 It is possible to set the injection unit vertically It is possible to change the screw diameter for fi 20, 30, 35 mm Metrics: Weight: 2360 kg Length/Width/Height: 4.24x1.90x2.05 m Drive: Pumps/motor: 15 kW Heating capacity: 4.6 kW Total power: 19.6 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On reque ...

Arburg 420C 1000-350 Year of construction: 1995 Injection unit: Screw diameter: 40 mm Spray weight: 153 g Spray pressure: 2120 bar Dosing volume: 182 ccm Clamping unit: Clamping force: 100t Tie bar spacing: 420x420 mm Size of clamping plates: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control: DIALOGICA Additional equipment: Euromap Robot Interface Hydraulic Core Pull X1 Metrics: Weight: 3700 kg Length/Width/Height: 4.35x1.64x2.08m Drive: Pumps/motor: 22 kW Heating capacity: 8.6 kW Total power: 30.6 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Inv. Num. : 6298 Type: 1000-430 Producer: DEMAG Created: 1995 Parameters: Clamping force: 100 t Screw diameter: 40 mm Injection capacity: 231 cm³ Injection mass: 205 g Min. height of clamping plate: 580 mm Min. width of clamping plate: 590 mm Distance between uprights (horizontal): 400 mm Distance between uprights (vertical): 400 mm Opening the mold: 500 mm Machine length: 4200 mm Machine width: 1400 mm Machine height: 1900 mm Injection weight: 4200 kg

Demag Ergotech Compact 250-80 Year of construction: 1995 Injection unit: Screw diameter: 18 mm Injection weight: 20 g Injection pressure: 2400 bar Dosing volume: 22.8 ccm Clamping unit: Clamping force: 25 t Tie bar spacing: 280x280 mm Size of clamping plates: 410x410 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC4 Additional equipment: Air valve x 2 Hydraulic core pull x 1 Injection unit hardened - Bimetal Original Demag tool crane: chain, electrically controlled, 2 lifting speeds Metrics: Weight: 2600 kg Length/Width/Height: 3.20x1.30x1.80 m Drive: Pumps/motor: 7.5 kW Heating capacity: 3.7 kW Total power: 11.2 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in � ...

ENGEL ES 330/80 HL injection moulding machine was built in Austria in 1995. A highly reliable and efficient machine equipped with high-end components, is used in the processing of plastics by injection moulding. The combination of high mould clamping force and a powerful screw with a diameter of 35 mm guarantees the high quality of the manufactured products. The injection moulding machine works with injection moulds with a height from 170 to 370 mm, which placed on 710 x 660 mm platens are closed with a force of 80 tonnes. The machine is equipped with an ENGEL CC100 CNC controller for setting injection moulding process parameters, an ENGEL ERC 23/1-CH servo-driven multi-axis robot and a pneumatic and hydraulic core. The tie-bar-less injection moulding machine weighs 5300 kg. Technical specifications for the ENGEL ES 330/80 HL injection moulding machine - maximum clamping force: 80 ...

INJECTION UNIT Screw diameter: 35 mm Calculated injection volume: 168 cm³ Length / diameter ratio: 20 L / D Pressure on the material: 2020 bars CLOSING UNIT Closing force: 800 kN Opening stroke: 450 mm Mold thickness Mini / Max: 250 mm Max distance between tray: 700 mm Passage between columns: 400 x 400 mm Tray size: 580 x 590 mm GENERAL Heat output: 22 kW Total installed power: 30 kW Quantity of oil: 250 l. NC4 control Machine used exclusively in a clean room

KRAUSS MAFFEI 125 T injection press in good condition Reference: 125-460 C1 Closing unit: Closing force: 125 tonnes Opening stroke: 900 mm Distance between column: 470 x 470 mm Mold min. : 300mm Max mold: 600 mm Tray dimensions (h x v): 770 x 750 mm Injection unit Screw diameter: 40 mm Injectable weight: 195 g Injection pressure: 2112 bars Measurements and weights Dimensions: 4.5 x 1.5 x 2.2 m Machine weight: 4100 kg Euromap 12 robot interface

There are eight ARBURG Allrounder 220M available. ... mais informação

Heating output: 5.5kW, connected load: 16.5kW, weight: 2.61t. ... mais informação

Clamping force: 500kN, heating output: 5.4kW, connected load: 23.9kW, weight: 2.4t. ... mais informação

BOY 22D Injection moulding machine Year manufactured: 1995 The machine is in good condition but is in storage and used only lightly after it was overhauled before I perched it. ... mais informação

INJECTION UNIT Screw diameter: 30 mm Calculated injection volume: 98 cm³ Pressure on the material: 1450 bars CLOSING UNIT Mold thickness Mini / Max: 190/330 mm ... mais informação

Engel 600/145 injection molding machine Year 1995 Engel brand injection press. The machines are not powered on, they are stored in a warehouse while waiting to find a buyer. Clarification: they were all in perfect working order before being moved. There are 5 machines: - an 80 ton - a 110 ton without columns - a 145 ton - a 250 ton - a 420 ton Model Year between 1988 and 1994 (EC 88/CC90 cabinet)