extrusoras usadas para venda

Extruder for the production of three-layer LDPE film, German company Kifell. Capacity -150 kg/h. Foil thickness 0.03 - 0.2 mm. Width of upper rollers 1500 mm. Dolici double-sided winder 1230 mm. The width of the mouthpiece is 70 mm. Year of production 1985, in continuous production since 2010, available for viewing and testing in our company.

We sell lines 80/156, 65/132 and 55/110 for the production of WPC products (terrace boards, siding, fence boards, window sills, panels, logs, etc.) The equipment is installed at the enterprise, fully operational, and can be started. We will help with commissioning and training ... mais informação

Extrusion line for the production of heat-shrinkable OPS (oriented polystyrene) film Product structure A/B/A Recyclable materials (mixed) SBC, GPPS Thickness 40-60 microns % shrinkage 70-72% Net width / when leaving TDO 2780 / 3200 Main extruder ZSK Mc70 plus Coextruder 50 mm Static mixers - in the main extruder and co-extruder lines. Die - Nordson Autoflex VI-R H40 Die 750 mm (28 bolts) Roll stack - 2 shafts (with mirror surface - chrome) MDO 6 shafts (1, 2 - preheating; 3-4 stretching 1:1.2; 5.6 - annealing) 2 thickness measurement sensors from NDC (USA, UK) with automatic thickness control, new control equipment installed in 2018. (computer and software), sensors - overhaul in the UK from the manufacturer (NDC) - 2019-2020 TDO stretch up to 1:5 Filmatic winder from W&H (Germany), Max. roll diameter 580mm, expandable to 800mm line speed (mechanical) up to 50 m/min Volt ...

Description: The forming machine is equipped with automatic sheet feeding unit. The sheet feeding unit also have a top preheater by the design of Illig. It is fully equipped with pneumatic cylinders and ceramic heating elements.Approx. Onsite Dimension. (l x w x h): 7,000 x 5,000 x 4,000 mm, weight approx.: 12,000 kg

Description: Manufactured: 2005 Serial number: 1226 Operating hours: 5.745.000 cycles Material: PS, PVC, PET, PP, EPS Stations: Forming, Cutting and Stacking Forming Area: 770 x 650 mm Maximum Film width: 820 mm Maximum forming depth: 120 mm Maximum dry cycle speed: 30 cycles/min Max.Closing Force of the Cutting Press: 60 ton Maximum Pressure: 6 bar Vacuum pump motor power: 2,2 kW Total heating power of the upper oven: 36 kW Total heating power of the lower oven: 33 kW Vacuum pump capacity: 100 m^3/h Dimensions (L x W x H): 10,0 x 2,4 x 2,7 m Total Weight: 8000 kg Approx. Onsite Dimension. (l x w x h): 12,000 x 2,000 x 2,600 mm, weight approx.: 8,000 kg

for LDPE HDPE PP ABS PC PS, Nominal throughput rate 350-450 kg/h depending on feeding reate and material including scrap silo fedding auger crammed feeder extruder with 105 mm screw 40 LD double degassing 110 kw a.c.drive non stop hydraulic screenchanger water ring pelletizer drying centrifuge electrical cabinet user’s manuals and drawings constructed in 2000 offered RECONDITIONED, On request, we can fit this extruder with a fully automatic screenchanger.

AMUT TWIN SCREW EXTRUDER FOR PIPES/PROFILES, Type BA92/22, constructed in 2004, parallel counter-rotating screws diam. 92 mm 22L/D, new screws and barrel, used for PVC window profiles, D.c. 59,5 kW drive, including 2 volumetric dosing units ... mais informação

WELEX SHEET CO-EXTRUSION LINE, running with ABS and PS, extruder 115 mm screw diam. 30 L/D, degassing system, 225 kw drive, 190 rpm screw speed, hydraulic screenchanger, hydraulic pack and accumulator, Maag gear pump 56/56, water cooled, gravimetrical blenders, Motan dehumidifying dryers, + Covema co-extruder with 60 mm screw diam. 24 L/D, 175 rpm, electrically heated, air cooled barrel, 18,5 kw drive, 1.650 mm EDI R75 ultraflex die., Flex range on the top lip of up to 1.9 mm. Mounted gap is ca 2.6 mm., Bottom lip is removable and has slotted bolt holes, adjustable to achieve a wider thickness range., One spare bottom lip available - thickness to be checked, 1650 x 400 mm Ø rolls, Static mixer, ABA co ex block with plate type inserts, 1.650 mm 3 roll polishing stack model 18x65 LHSL. 450 mm diameter rolls. Chain driven through selector gearbox. circa 5 hp dc motor. Upstack configuration ...

OMP PREALPINA 180 mm. 35 L/D, for HDPE LDPE LLDPE PC PP PS ABS, Constructed in 2002, The line includes:, (OPTIONAL - Buffer silo with agitators and feeding auger), forced feeding unit, extruder with 180 mm screw 35 L/D, vacuum degassing system, 415 kw drive, semi-automatic screen-changer with 300 mm diam. screens., water ring pelletizing unit, drying centrifuge, vibro-classifier, electric cabinets for managing the line, throughput rate 1.000-1.400 kg/h depending on scraps and feeding rate, Users manuals, drawings, CE., Running until October 2023, Available RECONDITIONED (various steps meeting your budget), Available with FULLY AUTOMATIC SCREENCHANGER on request., See how we recondition [HERE](https://www.germanplast.eu/pages/what-we-do), ask for video of the line running

USED REGRANULATION LINE for PE PP PC PS ABS PA, throughput rate 800 kg/h, including crammed feeding unit, extruder with screw diam. 150 mm.(5.91) 33 L/D, fan cooled barrel, 352 kw drive, vacuum degassing unit, semi-automatic sliding plate screen changer (possible addition of fully automatic screen-changer), POWER PACK, Filtec under water pelletizer, water filtering unit, heat exchanging unit, centrifugal dryer, electric wiring and cabinet new in 2004, This extruder has been constructed in 1997, and we offer it reconditioned, CAPACITY: 800 kg/h, MATERIALS: PE PP PS PC ABS PA, VACUUM DEGASSING POINTS: 1, AVAILABILITY: 5-6 weeks from confirmation

BIELLONI BLOW FILME LINE, xtrusion line with screw diam. 80 mm, die diam 180 mm., n.2 cooling rings, calibration cage, oscillating pull off unit 1.200 mm.wide, for LDPE LLDPE HDPE (in blends) from 18 to 170 my, as is or reconditioned, screw diam.: 80, die diam: 180, wider: double 1200 mm. ... mais informação

LEDA EXTRUDER 160 mm 50 LD 2 degassing pumps, for PP PS PE ABS PC, etc., Very good quality for this extruder, 2 m3 ca. storage silo, crammed vertical screw for light materials with adjustable speed,, extruder with barrel 160 mm. screw, 50 L/D, Infra Red Heaters, 355 kw a.c.drive with inverter (about 60% power used in work), Double vacuum degassing system, Control cabinet, Nominal throughput rate 800-900 kg./h, The extruder is offered RECONDITIONED, and can be completed with FULLY AUTOMATIC SCREENCHANGER + PELLETIZER, L/D RATIO: 50:1

AIR PELLETIZER FOR PVC AND COMPOUNDS for throughput 500 to 1500 kg/h connection flange built on Clients design made in steel heated by ceramic heaters, temperature probe and protection carter, stainless steel granulation chamber on horizontal axix, quick opening, knife-holder with fluctuating star to reduce knives consumption., self adjusting knives to nozzle by means of a spring which keeps knives pressed, with less wearing out and increased efficiency n.1x 3 kw motorwith extra strong bearing and long shaft, cutting die in anti-wear steel with number and Ø of holes bespoke to project. 1,5 kw blower, Venturi system, knife template, electric cabinet and touch screen control board with modem for remote assistance

VARIOUS SIZES AVAILABLE, Example : for a 250 mm. screen Ø:, Single plate with 2 sliding breakers with radial holes 6,5 mm.diam. Screen diam.250 mm. Construction in steel on n.1 supporting wheeled cart Heating through 4 plate heaters W 3.750 V.240 each one Total power 23 Kw Hydraulic l power station 7,5 kw with control electrovalves, n.2 storage units Pump group externally positioned PTFE ring N.2 temperature controls on drawers N.2 temperature controls on bodies Max work temperature 260 °C Complete with all safety devices Control panel on hydraulic pack Pressure transducer User’s manuals, drawings CE, TYPE: Semi-automatic, non-stop

For LDPE MDPE and BIO Web width from 600 mm up to 1600 mm Throughput rate 100/160 kg/h depending on materials Max production speed 80 Min/max thickness 30/200 my (tolerance sigma 2 +/- 8% Extruder with screw diam. 65 mm. 30 L/D MELT control Oscillating die diam. 100-200-300 mm. gap 1,4 mm. Blow Up Ratio 1,5 – 4,5 high capacity cooling ring with inverter on electric fan 7,5 kw Calibrating basket 1.000 max diam. Gusseting units Pull off unit min/max width 600_1600 mm. Stretching rollers 1.800 mm wide Corona treatment Back to back winding station type BA 2/1.800 Max reel diam. 1000 mm. N.2 slit and seal units Supporting tower height approx 9,0 mt. Construction year 2003 Excellent conditions Mounted but disconnected

MP BLOWN FILM EXTRUDER EBHD 80, for HDPE and LDPE, constructed in 2005, excellent conditions, Barrel Screw: Φ80 mm with mixing zone LD 28/1 nitride hard chromium steel, Barrel heating zones: 4 zones thermal power 4 KW each plus 1 filter thermal zone 4 KW., Screw Length (L/D) : 28/1, Screw Diameter (mm): 80, Screw Speed (R.P.M.) : 65, Cylinder Total Heating (KW): 16, Flange Heating (KW): 4, Number of Die Heating Zones: 3, Die Total Heating (KW): 6,6, Cylinder Cooling: 4 separates fan motors for each individual thermal zone, Cylinder Cooling Power (KW): 3,5, Installed Electric Power (KW): 70, Max Output (KG/H): LDPE 100 Kg/H, HDPE 90 Kg/h, Film Width: (Min-Max) 280 mm – 1000 mm, Film Thickness: (Min-Max) 0,018-0,200 mm, Main Driving Gear Reducer: Monobloc Reducer Italy Made ROSSI SPA”, Main Motor: AC 3 Phase Inductance Motor 30 KW (40 HP)., Main Motor Control Driving: (VFD Inverter MI ...

TECOM 90 BLOWN FILM EXTRUDER, for LDPE MDPE and blends, 90 mm screw diam., 4 components gravimetrical dosing unit, 400 mm die, calibration basket, pull off unit, gusseting units, Double collection frame wirh 2.225 mm width, complete with tower, constructed in 2000, offered AS IS or RECONDITIONED, still connected

GAMMA MECCANICA COMPACT 50, complete extrusion line, production rate 100-130 kg/h depending on materials ad feeding rate, including:, conveyor belt, agglomerator, Extruder with 50 mm screw, n.1 vacuum degassing unit, BDPLAST screen changer, water ring pelletizer, drying centrifuge, cyclon, vibro-classifier, Constructed in 2009, offered RECONDITIONED

MAM BLOWN FILM EXTRUDER, for LDPE HDPE MDPE and blends, Barrel with 63.5 mm. screw Ø, die diam. 200 mm., film width 1.500 mm., single winding unit 1.800 mm wide, constructed in 2004, complete with tower, machine connected in production, offered AS IS or RECONDITIONED ... mais informação

We offer it dismantled and CIF ITALIAN PORT., In very good conditions,still connected, can be seen in work on appointment or on a video call. The line includes: N. 2 extruders diam. mm.55, 78 kW 30 L/D N. 1 extruder diam.75 mm. 142 kW, 30 L/D n. 3 lever type screen changers Melt control system 3-layers still die Ø mm.300 gap. mm.1,4 IBC cooling system AM500/2 dual flow cooling ring 2 temperature exchange batteries electrical cabinets with Mitzubishi inverters Oscillating pull-off system width mm.1700, working width mm.1600, Gusseting units FIFE web guider mm.1700 Bubble driver with vertical adjustment and sensor for automatic bubble inflating (maximum Ø 1.175 mm.) for 3.386 mm.web circumference) Back to back winding station 1.680 with 4 expandible mandrels Automatic film cutting Automatic reel unloading system Bolted 12 m.tall tower with 3 storey, ladders (10 m. at 3rd floor + 2 m. pul ...