extrusoras usadas para venda

Extrusion line for manufacture of PS-PE-ABS-PP sheets etc ... Brand: Siepla Year of manufacture: 2008 Four-cylinder grille with servo-controllers Flat head: Maximum head width: 1000mm Maximum aperture up to: 2mm Minimum aperture: 200 microns Built-in shear for cutting plates. Two single-screw extruders: Ø 120mm and Ø 75mm MAAG melt pump and vertical pump: 1300 m3/h, 1350 rpm. Type: G160A Drag trolley Production capacity: 250 – 350 Kg/h Horizontal hydraulic changer with double cavity: Ø 16 mm. Manuals are available for each machine station as well as for compliance with EC directives.

Granceado line 1 spindle: 100 mm Ø, 35 L/D, brand: Siepla. Year: 2007. Forced feeding, degassing, head cutting to the water, with filter changer.  ... mais informação

Extruder 1 spindle Brand: Eurotecno, 90 mm Ø, 33 L/D. Electrical panel, filter changer: 160 mm, wire head for graining, stainless bathtub: 3 m, without motor. Eurotecno noodle model G-400 with blades: 300 mm.  ... mais informação

Extruder 1 spindle : 120 mm Ø 35 L/D, make: Union, motor: 110 Kw (150 hp). 4.2 m. long. With degasser, filter changer: 220 mm, overhead cutting to the water with centrifuge and screen. Electrical panel with variable speed drive.  ... mais informação

Line for complete PE pipe, with automatic dropper inserter. Brand: TRIMEC. Year: 1994. Composed of : A.-Extruder TRIMEC TM 75/30D. Engine: 57.5 kw. Hopper loader. B.-Head for tube. C.-Loader system drippers, with accumulator tank and insertion of TRIMEC drippers. D.-Vacuum bathtub and stainless calibration: 5 meters VC/1. E.-Stainless cooling bathtub: 5 meters. VR/1 F.-Stainless cooling bathtub: 5 meters. VR/1 G.-Interline drill with guillotine TRIMEC DRTS PERFORATING DEVICE. Type GF/1. H.-TRIMEC stretch trolley: 2 TR/1 bands. I.-TRIMEC winder, type: ML3/1.

Extruder 1 spindle: 60 mm Ø, 25 L/D, brand: Flag. No motor, no electrical panel, with 6-speed gearbox.  ... mais informação

Extruder 2 spindles: 50 mm Ø 12 L/D, motor: 4.5 kw, without electrical panel.  ... mais informação

Granceado line (Pelletized) extruder 1 spindle: 90 mm Ø, 35 L/D, brand: Eurotecno. Hydraulic filter changer: 160 Ø, pellet head, bathtub, noodle and electrical panel with motor: 106 Kw, dc and variable speed drive.  ... mais informação

Extruder for pellet manufacturing Brand: Erema, model: RM160 TF-VSV, year: 2001, 160 mm Ø, double degasser, motor: 200 kw, agglomerator with motor: 132 kw, hydraulic filter changer, wire head, bathtub, vacuum pump and Noodle Previero with vibrating screen. Complete dehumidification installation.  ... mais informação

Extruder 1 spindle : 130 mm Ø, 35 L / D, for grancear plastics, brand: Plasco, with forced feeding. Degasser, with vacuum pump: 15 hp. Filter changer: 260 mm, overhead cut to water. Vibrating screen and motor: 238 KW with variable speed drive and electrical panel. GT-2982  ... mais informação

Extruder 1 spindle: 120 mm Ø, 35 L/D, for graining, brand: FBM Falzoni, with degasser. Vacuum pump: 5.5 Kw, Hydraulic filter changer: 160 Ø. Overhead cut to the water and centrifuge. Extruder motor: 180 Kw, with variable speed drive.  ... mais informação

Extruder 1 spindle: 125 mm Ø, 35 L/D, brand: Eurotecno, with forced feeding, degassing. Motor: 160Kw, hydraulic filter changer: 250, wire head. Bathtub and noodle, Brand: RIETER 200. Year: 1999. Production: 500Kg/h.  ... mais informação

Extruder 1 spindle for manufacture of pellets. 120 mm Ø, 35 L/D, brand name: FBM ( Falzoni), type: ETF 120 V 380/5L, year: 1988. Engine: 200 KW. Degasifier and filter changer. Head cut under water, year: 2006, brand: PRT and force-feeding silo.  ... mais informação

Extruder 2 corrotating spindles: 50 mm Ø, 40 L/D, brand: ICMA SAN Giorgio, with double degasser. Motor: 57.5 Kw direct current with drive. Material dispenser and thread head (spaghetti), with electrical panel.  ... mais informação

Manufacturer: BERSTORFF / Germany Type: GKE- 250 x 6 D Year of Make: 1977 Screw: Ø 250 mm x 6 D – kerprogressive, catchy dimensionally in good condition (Ø 257.0 mm) according to DEGUMA measurement protocol Hollow drilled for cooling via rotary union Screw speed: 5.1 - 51 rpm Output: approx. 3,000 kg/h, depending on material and profile Extrusion height: 1,700 mm (with base frame) / 1,000 mm (without base frame) Cylinder: cylinder liners in good condition (Ø 257.55 mm; according to DEGUMA measurement protocol), only slight traces of running-in; Feed opening 320 x 250 mm, with feeding funnel, no feed roller; 2 temperature control zones plus head Head: 2 strainer heads Ø 100 mm on hinged flange, hydraulically locked (bayonet lock), with pressure and temperature measurement sensor (for each head) Temperature control system: Steam heated; without ...

Saw for Pipe Cincinnati RS 25 PZ S 1992 year 4000 Euro  ... mais informação

calender for PCV foil  ... mais informação

Twin Screw Extruder Metalchem 2T9/4,5 for PCV, Made by Metalchem out-put 100 kg/h  ... mais informação

Double Screw Extruder, good codition  ... mais informação

Without Extruder Complete Line for Pipes 63-140 mm Reifenhauser only 20.000 working Hour // very good condition consist of following elements ; 1. 2. Vacuum sizing tank Reifenhauser KKE-R 0125 nr. 70057 3. Cooling tanks Reifenhauser KE-R 0125 /6000 nr. 70058 4. Cooling tanks Reifenhauser KE-R 0125 /6000 nr. 70058 5. Cooling tanks Reifenhauser KE-R 0125 /6000 nr. 70058 6. Pipe pulling device Reifenhauser A-R 0075 nr. 70059 7. Saw for Pipes Reifenhauser TSQ-R 0075 nr. 70060 8. Marking Machine Medek & Schorner FMS 2R-U nr. 758.45