Fabricante:
(Categoria: 302)
Varex 3-layer blowfilm-extruder Head diameter: 630 mm Screw diameter: 70-90-70 mm( die gap: 2,4) Film width: 1390 – 2580 mm Film thickness: 10-200 my Output: max 480 kg /hour Winding diameter 1200 mm Core diameter 76/150/152 mm Energy: 295 kW/h Treatment: in+outside ... mais informação
The extrusion line was designed for cast film production. Processing of thermo plastics in a temperature range of 150-300°C. POSSIBLE LAYER STRUCTURES: - mono film - 3- layer (A-B+C-A) - 5- layer (A-B-C-B-A) DATA OF FACILITY Total output of extruders max. 2230 kg/h Extruder A: 90/33 L/D max. 330 kg/h Extruder B.: 135/33 L/D max. 950 kg/h Extruder C.: 135/33 L/D max. 950 kg/h Film width range (net): 1600 - 2110 mm Two rolls cutting possible (2x 800 – 2x 1055mm) Thickness range: 25-580μm Production speed: 10 - 150m/min Roll width: 2500 mm Max. roll weight: 2000kg ADDITIONAL COMPONENTS (QUALITY): Non-contact thickness equipment for automatic TD profile measurement with double side corona treatment (max. 12000W) Optical inspection system, including marker system if failures are detected, incident and transmitted light system ...
This WEBER extruder is in machine storage at Plastima Used Machinery. The machine comes from 1997 and is in great condition. Brand: Hans Weber GmbH Model: NE 7 042 Type screw: single screw Year of construction: 1997 Screw Ø: 75mm Working hours: 58.668 ... mais informação
This WEBER extruder is in machine storage at Plastima Used Machinery. The machine comes from 1997 and is in great condition. Brand: Hans Weber GmbH Model: NE 7 048 Type screw: single screw Year of construction: 1997 Screw Ø: 75mm Working hours: 76.200 ... mais informação
This WEBER extruder is in machine storage at Plastima Used Machinery. The machine dates from 2007 and is in great condition. Brand: Hans Weber GmbH Model: CE 5.2 Type screw: Double screw conical Year of construction: 2007 Screw Ø: 37 – 75mm Working hours: 23.103 ... mais informação
This extruder from Changzhou Schuangli is in machine storage at Plastima Used Machinery. The machine is from 200 and has a normal number of working hours for its age. Brand: Changzhou Shuangli Transmission machines Co, Ltd Model: 200 Motor power: 37 kW Screw Ø: 50mm Single Screw ... mais informação
This extruder from Periplast is in machine storage at Plastima Used Machinery. The extruder dates from 2005 and is in great condition. Brand: Periplast Model: Extrusora 25X25D Screw Type: Single Screw Screw Ø: 25mm Screw length: 25mm Motor power: 2.2 kW Year of Construction: 2015 ... mais informação
This extruder from Weber is in machine storage at Plastima Used Machinery. The machine is from 1996 and has a normal number of working hours for its age. – Brand: Hans Weber GmbH – Model: DS 11 – Year built: 1996 – Screw Ø: 107mm – Working hours: 59,783 ... mais informação
Strainer Bandera 150mm with 75kW motor. This machine has been overhauled by Deguma and little used after that. More info as attachment. ... mais informação
Year: 2003, low working hours, in good condition Availability: immediately. Current condition: can be viewed in operation. Screw: 60, L/D ratio: 35, Capacity: 120-140 kg/h, Material force feeding screw: available, Degassing system: available, Cutting head type: head cutter, air cooled. Material suitable for processing: PE/PP/PS. Humidity max 3 % Equipment: Foil silo, capacity 2 m3, Vacuum pump for degassing, Temperature control box, Pressure control, Air cooling, conveying, Venturi, cyclone and pipes... Dimensions: 6,40 m length x 2,10 m width x 4,30 m height Installed power: 30 Kw.
Blown film line especially for PP processing length: 6,300 mm width: 2,500 mm height: 4,200 mm Weight: 3.700 kg blowing capacity: 65 kg/hod. Film Thicknes: 0.015 – 0.1mm film width: 250 – 650mm Die- diameter 65 mm Winding speed: 5 – 60m/min. Power consumption: 72 kW ... mais informação
Injection molding machines of types VRC 601 must exclusively be used for the filling of molds with various kinds of plastic materials. Other uses will be deemed a violation of the intended use and exempt U. Kolb GmbH from being held liable for injuries and damage to persons and/or property. Strictly observing the safety instructions and notes issued by U. Kolb GmbH is also mandatory and forms part of the intended use provisions to be adhered to.
An unrenovated very little used ready-to-use extrusion-recycling product EREMA type RGA 1716 TE-VSV for processing shredded washed PET flakes. The quality of the rPET for direct contact with food according to the standards of the F.D.A. (USA) and EFSA (EU) can be achieved with an additional machine with SSP technology. Year of construction 2001, Extruder screw Ø 160 mm (L/D about 34), drive 200 kW, EREMA screen changer type SW8/170RTF, high vacuum system, granulation of Previero, Siemens control with touch screen, Capacity 600 – 1,000 kg/h; usual power was 800 kg/h, Auch + Technik e. Kfm. D-73728 Esslingen Phone +0049 1577 5329827 V
Extrusion recycling line as good as new EREMA type "Vacurema" for processing rPET, 700 operating hours, Year of construction 2020, Capacity 600 kg/h, Delivery time: Immediately. Auch + Technik e. Kfm. D-73728 Esslingen Phone +0049 1577 5329827 ... mais informação
Used first-class renovated extrusion recycling plant EREMA for the processing of polyethylene and polypropylene. Capacity of approx. 1,100 kg/h. WITHOUT DEGASSING. Processing of only CLEAN material; without printing ink. Auch Folien + Technik e. Kfm. D-73728 Esslingen Phone +0049 1577 5329827
Brand: Davis-standard, width: 1,400 mm, thicknesses: between 0.5 and 8 mm, year: 1999. Composed of: - Extruder 1 spindle brand: Davis-standard, 90 Ø diam, 32 L/D, engine: 250 hp, hydraulic filter degasser and changer and continuous flow gear pump. - Co-extruder 1 spindle brand: Davis-Standardar, 60 Ø diam, 32 L/D, engine: 60 hp, degasser, hydraulic filter changer - Co-extruder 1 spindle brand: Davis-Standardar, 60 Ø diam, 32 L/D, engine: 60 hp, degasser, hydraulic filter changer - Sheet extrusion head brand: IDE, width: 1,400 mm, thicknesses: 0.5 to 8 mm, up to 5 layers. - Calender, width: 1,500 mm, roller diameter: 460 mm. - Stretch and cooling table: 1500 mm. - Cutting shear.
Extruding system with cross-spray head for sheathing of small profiles/filaments consisting of: 30 mm extruder with tool, water bath, extractor and winder Optional with memory for role change ... mais informação
Compounder with segmented screw elements, cylinder with a degassing opening with hot tee, stainless steel housing, swivel ... mais informação