máquinas de goma usadas para la venta

1 x Farrel F370 mixer chamber and hopper M/c no. 081110, Date: November 2009, SSA dust stops, 4 Wing Rotors, Drop door with Linear actuator, Base Plate with Toggle Latch. Pneumatic hopper with extension neck (Floating weight looks to be in good condition). Parts available: Body, baseplate, Toggle Latch, actuator and Pneumatic hopper with extension neck.

Qty 1 x Pomini Model P270 Banbury internal mixer, M/c no. 362, Year: 1996, HDM style rotors (2 wing equivalent), PYH Dust stops, Hydraulic drop door discharge with Linear actuator, Vickers hydraulic power pack, Unidrive gearbox with couplings (11D type, 1000HP rating). Pneumatic hopper. Without motor or controls. Can be supplied with or without gearbox. Quote for new motor and controls on request.

1 x Francis Shaw model K1 Intermix MK4, M/c number: 4176, Date: Jan 1991, Net chamber volume: 5.5litres, NR2 style intermeshing rotors, Pneumatic hopper, Hydraulic drop door discharge, with Thrigge Scott 45kW DC variable speed motor. 2 x Tool Temp temperature control units. The mixer has been completely dismantled and the rotors, door top, drilled sides and floating weight have been refurbished and re-chromed.  All other components checked, serviced or replaced during re-assembly.  The mixer will be supplied with NEW control panel with PLC, touch screen PC with data capture.

1 x Farrel Banbury internal Mixer, Model 00C.  Machine number: 91M7017, Year: 1992, Stainless steel jacketed swing side (drop door design). Maximum steam or water pressure 150psi, chrome plated two wing cored rotors with spherical roller bearings, gross capacity of mixing chamber 4.24 liters. 5" Diameter ram cylinder, maximum pressure 100psi. Chrome plated single slope V-bottom, stainless steel, pneumatically operated front door, F.Y.A. dust stops, oil seals, thermocouple. With 65kw (87hp), 340/440 volt, 1500 rpm motor, reducer ratio 15:1. Unit mounted in an enclosed cabinet with a pull-out discharge drawer. In very good condition. Machine to be supplied checked over (overhauled) and fitted with new electrical controls including Siemens S7-1200 PLC and touch screen PC for auto/manual mixing and recipe/data saving.

1 x Francis Shaw model K7 MK5 intermix, Contract no. 1443, Date: 22.1.98 (year 1998), NR5 Rotors, Net chamber volume 310Litres, Batch size: 217kgs, Hydraulic drop door with linear actuator, Hydraulic hopper, Francis Shaw Unidrive gearbox: Order no. G590304, KW rating 1300, output 46.45 rpm, ratio 25.834/1, 2 x 700kW, 1250rpm DC motors, 3ph, 660V, 50Hz. The mixer is in serviceable condition, but is without electrical drives/operator controls, hydraulic unit or lubrication unit (Can all be quoted if required). Full manuals/drawings available. Available: Immediately (ex stock UK).

Qty 1 x Shaw 60in x 22in two roll mill, Manual nip adjustment, Peripherally drilled rolls (front and back), Hinged guide plates, Sleeve bearings with motorised lubrication, Right angle drive gearbox with 115Kw DC variable speed motor, All mounted on a heavy duty bedplate. Carter stockblender mounted on too. Complete with controls etc and in very good condition.

QTY 1: New Bainite make 95 litre intermeshing type mixer Model: BMIM95 Intermeshing mixer with hydraulic hopper Net chamber volume: 95 litre Rotor speed: 6 – 60 rpm Rotor type: HP-5 design (intermeshing) Dust seals: SSA (self-sealing arrangement), Motor power: Siemens 420kW, 1000rpm AC squirrel cage motor with Siemens G150 VFD, Discharge door: Hydraulic drop door type with linear actuator and toggle latch mechanism, Feed Hopper Assembly: Hydraulically operated, Floating weight: single ‘V’ bottom type, Gearbox: Elecon Full unidrive type with S.F. 2.25. Bedplate: Fabricated steel, Ancillaries: Dust stop lubrication (1.5HP x 2), hydraulic pump unit (20HP) Electrical Controls:  Siemens G150 variable frequency drive controls. Operator control panel with Siemens PLC and HMI.

Qty 1 x Carter MK3+ Banbury internal mixer,  chamber volume 90L,  batch weight approx 85kg,  2 wing tangential rotors,  drilled sides, roller bearings,  hydraulic drop door with linear actuator and spade latch.  F type dust seals.  With 325kw, 1070rpm, 715A, DC variable speed motor and controls.  Pneumatic hopper.  Complete with hydraulic unit, lubrication unit etc and in good condition (previously used for mixing coloured compounds). 

QTY 1 x used Berstorff AUMA  Serial no. AO 3178/75, year 1975, Main drum width +/- 2500mm Main drum dia +/- 3000mm Aux drum dia. 1400mm Thermal oil heating With Sandvik 2250mm 1650SM grade stainless steel belt 1.8mm thick. Hydraulic pressure 350kp/cm  With 40HP motor and 3 stage reduction gearbox. The main drum and steel belt are in good/serviceable condition (the drum and belt were replaced in 1990's).  Note ALSO Available: 1 x new/unused spare Sandvik 1650SM grade stainless steel belt, 2250mm wide (in original crate).

QTY 1 x Berstorff Auma, Original year of manufacture 1972, Main Drum 1700mm wide x 1000mm dia, Aux drums 1700mm x 600mm dia, Steam heated, currently with 1660mm wide rubber coated woven steel belt, max pressure 192 Bar (approx 3000psi), 2 speed gearbox, Modern 5.5kW DC variable speed motor. Including let off and wind up units. Complete and in good working condition.

Lab Mixer Tangential Chamber volume 2,8 l / 2 l netto Sliding door AC motor 22 kW Year 1971 ... más información

Herman Schwabe Die Cutting Shaping Press Mechanical Press Model DG-HD Platen size 770mm x 1000mm Die cut shapes Manual cut / load pressure 4" stroke, 7" bore, 10 H.P. Motor, 415 volts 50 cycles 3 phase 14.84 full load current Made in Brooklyn, New York Serial number 50367 Complete with starter Overall dimensions 1.2m x 1.5m high x 3.3m long

1. LBBC Autoclave (AC3) Working diam. 600mm (2ft) Working: 1500mm (5ft) Max. working pressure 100 PSI 2. LBBC Autoclave (AC3) Working diam. 750mm (2ft.6”) Working: 1200mm (4ft) Max. working pressure 80 PSI  ... más información

FARREL BRIDGE 4-ROLL, INCLINED 'Z' CALENDER. 66 inch roll face width, 28 inch diameter. Rolls are current polished to produce matt PVC finish. Independent variable speed DC drive to each roll via solid state, AC to DC converter. Cross axis control on roll 4 (roll 3 fixed). Extensively modified and up-graded controls and drives.

Schubert Press The platen size is 1390 mm (52”) x 2490 mm (98”) Electric heaters Make - Schubert Daylight – 305mm Floor standing Total number of rams: 16 Ram diameter: 2 ¾” Working pressure 3500 PSI The overall dimensions are length 3850mm x width 1500mm x height 2200mm Operational The condition of the hydraulics and pump unit along with ram seals is good Spare seals maybe possible (video link available on request)

Reed 42" x 16" Two Roll Mill. 40HP Motor, with clutch brake. Friction ratio 1.1 Manual Nips. On one-piece steel bedplate.  ... más información

Complete Line Consisting of 1.Sheet material unwind station (let off stand) 2. Iddon 1320mm x 450mm dia wide 4 roll inverted L calender manual nip adjustment, even speed gears, auto lubrication system with 45kW AC right angle drive motor and gearbox, Steam heated bowls up to 150c Bowl temperature monitoring system, fabricated bedplate. Overhauled in 2007 (by Iddon) with new side frame and rolls precision ground 3. Edge Trim - make: Mario Cotta 4. Guillotine - Make: Pasquato SNC 5. Wind up

Tyre testing machine - static balancer for passenger tyres. Tyre size from 15 "to 18" (20") CE certified More details see the attached description!  ... más información

Iddon Two Roll Mill 6” diam. x 12” wide Fully guarded and interlocked  ... más información

1 x Farrel Pomini model F160 Banbury internal mixer, Original year of manufacture: 1980, but rebuilt in 2000 (very good condition), Chamber volume: 160L Net batch size: 120kg, With 2 wing type rotors, Rotor tips hard material coated and fully chrome plated Rotor speed max 50rpm, pneumatic hopper, hydraulic drop door, FYH dust seals, Unidrive gearbox, With 435kw DC variable speed motor and electrical controls (415V). Complete and in good condition.