subcategorías
(el tercer nivel de categoría)
Fabricante:
(Categoría: 704)
Corundum stone wet grinder Koruma Fryma T4 Reconditioned good working machine with 250 mm new stones for wet grinding. With double jacket for cooling and with electrical panel. 1 extra set of new stones 250 mm. Power 400v , 18,5 kw ... más información
for removing the stone from fruits,, equipped with pitting insert for cherries - plate hole diameter 26-14,, The machine has 40 stone removal plates, each with 77 holes., These holes are conical and have an upper diameter of 26 mm and a lower diameter of 14 mm,, The machine is equipped with the following engines:, Main drive: 2.20 kW 1,500 rpm, Brush drive: 0.37 kW 3,000 rpm, Vibrator drive: 0.75 kW 1,500 rpm, The speed of the machine is infinitely adjustable via a hand wheel., Output: 12 - 80 / minute - depending on the type of fruit and the ripeness of the fruit, power: 12 - 80 / minute - depending on the type and ripeness of the fruit, Dimensions / weight: 1.6 tons
Centrifuge; Salad spinner from business closure for sale. Machine is ready for use. Intensity adjustable via timer. For blue baskets (standard size are food processing) ... más información
Vegetable slicer for cutting slices, chips/chips and cubes. Including seamstress inserts 3; 5; 10 mm round knife for strips and chips. Includes cleaver 5; 10 mm for cubes. Discs infinitely adjustable from 2 to 25 mm ... más información
Vegetable slicer, ribbon cutter including various cutting knives and preparation table ... más información
Electricity: Single phase 230v / 5kVa / fuse 25 A / wires 4 mm 50/60 hz The electricity consumption for an 8 hours shift is approximately 2500W x 8h = 20kWh. Cooling water: Since the cooling unit (stainless steel) is a closed water-circuit, there is no water consumption (after a one-time fill). Minimum pressure: 1 bar (15psi) Maximum pressure: 3 bar (45psi) Temperature: between 13°C and 18°C Quality: lime free and reusable Inlet Connection: inch Outlet Connection: inch Compressed Air: Typical consumption of compressed air is 200 Nm / h (120 cfm), with a maximum consumption of 450 Nm / h (300 cfm). Minimum pressure: 6 bar (90 psi) Maximum pressure: 10 bar (145 psi) Quality: iso 8573.1 air quality standard Connection: 1.5 inch
Single beam X-ray inspection device,, was used for cylindrical jars and cans,, Capacity: approx. 150 glasses / min,, with ejection of contaminated containers,, with conveyor belt,, in use until 04/2024. ... más información
used for closing plastic bottles, content 2,400 ml, with Pano TO 100 mm PP HOmao without liner ... más información
Sormac knife peeler - for potatoes and beets - the peeler is after service - metal drum (not plastic) - drum length 2 m - total weight 3 tons - all made of stainless steel The processing capacity of the devices is 2/3 tons per hour, depending on the product and its size. I also have a peeling selector for the peeler, more information by phone. The machine in continuous operation works in our plant as a second technological line.
Pressquick PQ6-SU, Dry Cell TS-120, Lifting Kneader Type Diosna 120, Pressquick PQ3-SU Daily capacity approx. 500 kg . Drying 100 baskets . Ideally suited for larger farm shops, market drivers, egg producers. Also for delicatessen manufacturers for the production of special noodles. All spare parts available. German premium quality. To be sold against self-dismantling . Due to a lack of personnel, the plant did not go into production.
more available DIGI Fully Automatic Stretch Film Packaging Machine Type AW-5600 or AW 4600 Year of construction div. We will be happy to provide you with a package price offer if you accept several machines! ... más información
A prototype machine for cutting, dressing and cooling fruit, e.g. apples, pears. For example, apples and pears are cut into 8 or 12 segments with manual guillotines (2 pieces). The fruit falls into the bathtub, EQUIPPED with a glycol cooling system (coil installed), the belt speed can be changed, and 2 guillotines can work in the bathtub at the same time. Capacity up to 900kg/h, speed regulation. Built-in coil - Possibility to connect a cooling agent. Built-in circulation pump. The cut fruit falls onto a conveyor belt, which transports the cut fruit to the washing and cooling water, where it is removed from the liquid on a second belt. Minimum soaking time 3 minutes. Additionally, a temperature controller (Danfos programmer) is installed. Year of production 2015. 100% efficient with a VERY EFFICIENT cooling system. The guillotines are German devices manufactured by FEU ...
REF-0 FELTRACON LEMON PROCESSING AND SLICING LINE Line for cutting lemons into slices and half slices Manufacturer: FELTRACON Model: FC3281-S03 Year: 2006 Throughput: 750 kg/h (depending on the type of product) Product temperature: 5-20 °C. Composed of: 1) Accumulation elevator conveyor: Voltage: 220/380 V+PE [50 Hz] Rated power: 0.25 kW Rated speed: 0.087 m/s Overall dimensions: length 2,620 mm; width 1,750 mm; height 2,300 mm Belt effective width: 360 mm Net weight: 350 kg approx. Accumulation hopper: 200 litres (max.) 2) Cutting head with feed conveyor: It cuts the lemons into slices, while both ends of the product are discarded. Voltage: 220/380 V+PE [50 Hz] Rated power: 0.75 kW Max. product feed (including fallen pieces): 180 pcs/min Usable lemon dimensions: 42 mm Slice thickness: 7 mm Overall dimensions: length 1,750 mm; width 1,050 ...
Kronen GS 30, The biggest belt slicer for sale by Kronen., - Belt width 300mm, - Hold-down belt, - Multiple knives available, - Touch screen controlled ... más información
ISHIDA MULTIHEAD WEIGHER MODEL: CCW-RV-214W-16-50-WP-SLD APRIL 2021 SINGLE PHASE POWER VERY GOOD CONDITION TOUCH SCREEN 4 AVAILABLE ... más información
Agitator tank, make Schwarte - Milfor, year 2015, unused, for oil and other liquids,, stands on load cells,, Content: 1,000 liters, Inside diameter: 1,000 mm,, cyl. height: 1,250 mm,, outlet height: 500 mm,, single-walled/uninsulated on the top floor,, double-walled / insulated on the cylindrical shell and underbody,, with pressure-resistant heating/cooling system, Jacket space: 30 liters,, Permissible operating temperature: up to max. 85°C.
Adhesive label printer and dispenser, make Logopak, type 920 III TE, year 2012, Logopak - Type 920 III TE, year 2012 for printing and applying labels on packaging and pallets,, for labels up to 210 mm wide,, Labeling using a pressure brush on the stamp across the corner,, with shutters,, Label roll diameter: 400 mm, 76 mm core (150 mm adapter),, Cycle speed: 15 labels/min. (standstill labeling).
New device!, O Opens cans with a single manual movement, O Powerful manual lid punch (crown punch), O Recommended for a daily output of up to a maximum of 200 cans/day., O No sharp edges on the can by using semi-blunt knives., O For extra large cans (Requires custom tools. Sold separately), completely made of stainless steel,, suitable for can diameters: max. 230 mm and max. can height: 328 mm, Output.: approx. 6-10 cans/min,