máquinas para frutas, verduras, charcutería, comidas instantáneas usadas para la venta

metal detector spec. for jars, make Loma type IQ4, year 2005/2021, With search head, make LOMA IQ4 (search head - opening: width: 150 mm, height: 250 mm), Search head design: stainless steel housing, protection class IP 69k,, · 3-frequency technology to better adapt to different product effects and package sizes, Conveyor belt year 2005, unused, with Intralox tape, IP 67,, ejection by means of an air nozzle,, Drive with Danfoss frequency converter,, · Output: up to max. approx. 200 packs / min., Tape data:, Protection class: IP 67, · Total length: approx. 2,000 mm,, Useful width of the Intralox belt: 100 mm,, · Lockable box for rejected products, Plastic side guide in the inlet: length: 560 mm, height: 130 mm,, · With transfer rollers in the infeed and outfeed for gentle transfer of the containers.

24 weighing heads, total capacity: 9 l for weighing funnel, was used to weigh mini salami. ... más información

Vertical cartoning machine for bag products, make Pamatech, year of construction 2008, For packaging products in cardboard boxes with a conical top, For product format: L x W x H: 186 x 160 x 30 mm, Mechanical performance of the packaging machine: approx. 55 packs/min., Machine dimensions: L x W x H: approx. 3,000 x 1,600 x 2,210 mm, The system consists of a rotary indexing table with six stations:, 1. Blank magazine with erecting station, 2. Closing the bottom with hot glue, product filling, The product can be filled by hand or by means of a feed belt, 3. Pre-break for conical folding box, 4. Reserve: Optional Seal Standard Packing, 5. Glue and press the lace closure with hot glue, 6. Unloading station with ejector on chute, The blanks are pulled off an inclined magazine and erected in double transfer handling. The magazine has adjustable side guides and moving supports to optimize slid ...

workshop overhauled, semi-automatic cabbage heads are placed by hand on the drivers that the Conveying heads to the drilling station, two-lane design, machine power in Standard design: approx. 20 cycles/min Departure belt disposed of, cabbage heads are autom. from the recordings in the Nachf. machines dropped.

Usable length: approx. 2,300 mm, usable width: approx. 105 mm, with built-in drip tray, Hinge plates made of plastic, side guides: height: approx. 80 mm, adjustable in the Width from 50 - 250 mm, drive not adjustable, manual or automatic operation possible,, can promote in 2 directions. ... más información

Scale output: up to 140 cycles/min.,, Weighing range: up to 2,500 g / depending on the number of drops,, Volume range: 1,500 ml per drop,, Weighing system: 2-beam DMS system,, Resolution: up to 0.1 g., Without control. ... más información

Design: stainless steel, weighing cells from Philips, dimensions: approx. 1,300 x 1,250 x 720 mm, weight: approx. 50 kg. ... más información

suitable for tomatoes and other soft fruits and vegetables, sawtooth-shaped cutting blades that move back and forth at high speeds move, low cutting pressure, max. product dimensions: 100 x 70 mm, Existing blade set: 4.76 mm cutting thickness, WILLICH BEARING. ... más información

obsolete, for removing the outer leaves of white and red cabbage, one becomes Strunk drilling machine downstream, 10 counter-rotating cleaning rollers with angular profiles Solution of the loose outer leaves, in the transverse direction between the clearer rollers is a height-adjustable grid installed, with which the brushing intensity can be adjusted., Transport of the cabbages by means of a drag chain.

Line for filling delicatessen products in plastic trays, consisting of:, Cup filling system, make Waldner, type 12.3, year 2011, 2 lanes (2 different formats) - but it can only be worked in one lane., Format set 1: round cup diameter 100mm (incl. rim) height 80mm and 60mm, Format set 2: Rectangular cup 185mm long 135mm wide (including rim) 35mm deep, The trays are sealed with film from the roll, Roll magazine approx. 500mm long, 400mm wide, Waldner space requirement: approx.: 2,100 m 2,100 mm, Outfeed belt of the Waldner: approx. 1,800 mm, Dosing of liquid and free-flowing components:, The system has two filling heads, which are filled via a pipeline directly from the cooking kettle., The pipeline can be completely pigged., The pigging line and Maso - Sinus pump, type SPS 3, are included in the scope of delivery., Feeding of the multihead weigher by means of two belts:, Tunnel elevator  ...

Gear for Herbort drum cutting machine, type 120S, This is the first plastic gear wheel with a hub for a knife shaft., The gear has 58 teeth. ... más información

1) Manual sealing machine, make Miveg, type MT325, Incl. power cable yellow + variable roll holder, (fixing boxes left/right), for external GN dimensions 325 x 265 mm (1/2 GN),, existing format: 2 x 1/4 GN,, max. roll width 325 mm; diameter 200 mm max., Net weight: 30 kg, 2) Mobile table, Stainless steel, with parking brake, height adjustable: from 715 - 915 mm,, height grid 4 x 50 mm,, width: 445 mm, depth: 530 mm,, with a storage compartment of 280 – 480 mm., Table tray for MT325 table, Stainless steel, right or left, Width: 350mm Depth: 530mm Height: 240mm, Height offset at the table: 85 mm, attach on both sides, Devices were used for about 1.5 years., Existing format: 2 x 1/4GN,, Existing format: 2 x 1/4GN,

New device!, Completely made of stainless steel, for a daily output of max. 200 cans, suitable for can diameters: max. 157 mm and max. can height: 366 mm, Output: approx. 6-10 cans/min, opens cans with a single manual movement, no sharp edges (burrs) on the can. ... más información

Cup sealing machine with screw cap, make JBL, type Linocap, year of construction 2009, Output: 60 cups/min., A film is sealed onto the plastic cans, then checked for leaks and then screwed onto a lid., Four formats for the following cup diameters: 45, 57, 83, 91.5 mm, Lid formats: 48, 60, 79, 98 mm, The seal and correctness of the closure seat are then checked., The main drive and ancillary units were replaced in 2021., Ready to use (if the format is right), Dimensions:, Length without straps: 4,300 mm, with straps: 7,500 mm, Width: 1,000 mm, with lid feed 2,600 mm,, Height: 2,300mm, power: 60 cups/min.

used to cut cabbage heads for sauerkraut production,, diameter of the cutting discs: 800 mm,, 4 pieces with 0.9 mm cutting thickness ... más información

Cherry stoner, make Baskaya, model BM - CC-IA, year 2020, The machine removes stones from cherries without destroying their natural shape., Plunger stoner, compatible with the FERRUM stoner., Output: approx. 800 - 1,400 kg/h depending on product quality and calibration., Version: stainless steel,, Dimensions: L x W x H: approx. 3,500 x 1,300 x 2,000 mm,, weight: 1,250 kg,, electr. Connected load: 4 kW.

Closing machine, fully automatic, year 2018, ALWID Variant-SK/DST, The system consists of:, - a fully automatic sealing machine, type: ALWID-VARIANT-SK / DST,, with a rotating star and set up for a screwing head, for one can size and one screw cap size, with fully automatic, Cap sorting and cap feeding, with lining of the, Cap sorting / parts conveyor, - With anti-twist device, set up for a round can size, - as a solo machine with 1.0 mtr. Infeed conveyor belt and 1.0 mtr., Outfeed conveyor belt, with infinitely variable belt drive, with, Bottle conveyor made of belt system, with complete electric, Control, machine base in stainless steel design, control cabinet on the, outlet side, - with a 4-sided protective cover with panes made of MAKROLON with, Security doors in CE compliant design, with top cover made of, MACROLON, General Information:, Working direction: right - left, Working heig ...

Horizontal tubular bag machine, make Jaguar Record in use for bars, This horizontal form, fill and seal machine can pack one or more products in a film bag., The machine runs at a maximum cycle rate of approx. 36 bags/min., The following formats (bag widths) are already available:, 35 mm width (single bar) & 145 mm width (several bars in one film)., The length of the bag can be adjusted variably., The heat-sealing film is sealed using heating jaws., The MHD print can be set manually and moved across the entire width of the film., Lt. current owner in working condition.

automatic rotary machine,, in use for mustard,, set up on round plastic cups with a diameter of 70 mm and a height of 80 mm,, additional format for rectangular cups: 55 x 43 x 17.7 mm, Filling volume: 5 - 200 ml, Output: up to 1,500 cups per hour,, Rotary consisting of:, Cup magazine, automatic unstacking of the cups,, filling station,, Lid station with corresponding lid magazine and automatic unstacking of the lids,, Output of the filled and sealed containers to an integrated collection table

Pneumatic can opener, make Edlund, type 625 M, powerful compressed air operated lid punch, (crown punch),, self-sufficient can opener for industrial use,, Output: approx. 2,000 cans per day, Characteristics:, completely made of stainless steel, for thorough cleaning can be hosed down from top to bottom, IP 65,, Suitable for opening cans of almost any size thanks to the height adjustability, Two - hand - operation, Compressed air requirement: 56.6 l / min at 6 bar,, format range:, minimum box height: 40 mm,, max. box height: 300 mm,, max. can diameter: 230 mm,, Info:, - Existing punching crown for can diameter 153 mm, - Additional punching crown optional, - With magnetic lid remover