Fabricante:
(Categoría: 705)
Equipment: Pre-crushing crusher type: APC-P 500 manufacturer: Hosokawa Alpine AG (Germany) year of manufacture: 2020 CONDITION:NEW (NOT USED) Available: 1 ... más información
Autostainer Link AS48 Agilent Dako https://www.agilent/en/product/autostainer-link-solution-for-ihc/autos tainer-link-48/autostainer-link-48-75845 - Process 48 slides in less than three hours. This means you can finish 96 slides in a normal working day with just one Autostainer Link 48 and one PT Link. - Gain up to 45 minutes of autonomy compared with our fastest Autostainer Plus - Make the most of your laboratory time by processing slides in parallel using PT Link and the fastest Autostainer Link 48 ever. - Have the freedom to set your own standards and the ability to control them VERY GOOD CONDITION Date of purchase: March 2014 Under annual maintenance contract PT Link DAKO tissue pre-treatment module https://www.agilent/en/product/pt-link-for-pre-treatment/pt-link-acces sories VERY GOOD CONDITION Date of purchase: March 2014
Equipment: Roller crusher type: WBG 5/8 PN Manufacturer: Merz Aufbereitungstechnik GmbH (GERMANY) Scope of APPLICATION:Chemical, coal, food industries. Also fertilizers year of manufacture: 2020 CONDITION:NEW (NOT USED) set in stock: 1 ... más información
Equipment: Jaw Crusher type: BB 650/350 manufacturer: Merz Aufbereitungstechnik GmbH (Germany) APPLICATION AREAS: geology, metallurgy, mechanical engineering, electronics, environment, recycling, glass, ceramics, building materials, chemistry, plastics. year of manufacture: 2020 CONDITION: NEW (NOT USED) Available: 2
Equipment: Crusher type: MICRO PULVERIZER MP 3W Manufacturer: HOSOKAWA ALPINE AG (GERMANY) APPLICATION SECTIONS:Chemical, Coal, Food, Fertilizer Production year of manufacture: 2020 CONDITION: NEW (NOT USED) Units in stock: 1 ... más información
Used powder mixer LANCELIN-FR type M-100-L, with approx. 100 l useful capacity. ... más información
We are offering a Cobas c311. This device was purchased last year from a liquidation of a laboratory and is now being resold untested. According to the laboratory, the device was operated until the dissolution. The device can be viewed and switched on on site A forklift is available on site for charging.
BIOMEK i7: Hybrid configuration with one 96-channel 1-300µL pipetting head and one span8 pipetting head that can be operated in either 5-1000µL pipetting mode or in continuous dispense mode. This unit also has a roof-mounted HEPA unit. ... más información
All robots are in excellent condition with less than 80 hours of runtime each. We also have a Class II enclosure (BioMAT2 Robotic by Contained Air Solutions) for housing one of the i5 machines. The machines configurations are as follows: The first BIOMEK i5 comes with a 96-channel 5-1200µL pipetting head, a side cabinet and en integrated thermal microplate sealer (PlateLoc by Agilent Technologies) and various deck-position units such as a positive positioner, an orbital shaker, and a peltier element. The second BIOMEK i5 has one Span8 pipetting head which can be operated in either 5-1000µL pipetting mode or in continuous dispense mode. It comes with several tube racks, tube rack holders, and fly-by barcode readers. Most of the peripherals are interchangeable. We also have a host of replacement parts, so it might be possible to respond to specific customer requests when it ...
The dosing system was designed according to drawing no. A10690 for the preparation of calcium cyanide and copper cyanide solution. The tank has a volume of approx. 1170 litres and is filled with water via an angle seat valve and with beads/scales/flakes via a feed screw. The dilution water is filled via a solenoid valve and a downstream angle-seat valve for volume adjustment. A spray nozzle in the aeration and deaeration dome prevents vapours from escaping when filling the tank. The water supply is shut off by a ball valve and the flow rate is adjusted by an angle seat valve. The extraction is switched on or off via the control unit. The feed screw first conveys the dry material into a two-stage shredder. From there, the dry material enters the container. The quantity of dry material conveyed is regulated via a slide valve on the feed screw. A suction device is mounted on the hopper o ...
Suitable for mixing powdery and liquid media Parts in contact with the product made of stainless steel 1.4435 (AISI 316 L) Useful volume 8-32 litres Operating pressure -1.0 to +10 bar Temperature range 0-130°C Max. Product viscosity approx. 10,000 mPas Agitator tank 75 litres with double jacket 5 litres Feed vessel 3.3 litres, operating pressure 0-10 bar, operating temperature max. 150°C, manufactured by Jentec, year of manufacture 2015 Centrally arranged anchor agitator, power 0.37 kW, speed range 10-50 rpm, additional conveying elements on agitator shaft and outer anchor (product lowering), PTFE scraper elements for tank wall and base, double-acting mechanical seal, silicone oil sealing liquid Eccentrically mounted propeller agitator with 2 blades Operated with external circulating homogeniser for emulsifying and pumping over and out (not in ...
Conveyor belt length 1,350 mm Conveyor belt width 100 mm Web spacing 30 mm, web height 5 mm Conveyor belt made of white plastic, as good as new Adjustable inclination 1 speed Dust compartment Mobile Drive 400V/50Hz ... más información
For high-precision dosing of lubricants for tablet presses (e.g. magnesium stearate) and the feeding of powders for tablet coating Twin-screw compact feeder (T20 double full-blade fine) as volumetric feeder/differential feeder in pharmaceutical design Parts in contact with the product made of stainless steel 1.4404/1.4435 (AISI 316L) Dosing capacity 0.0019 dm3/rev Vertical agitator HMI KSU-II Controller module KCM-SD Multi-pin Harting plug with coupling on signal for connection to tablet press. Can also be connected directly to 240V after conversion Flushing nozzle for connection to IMA Kilian tablet press Synthesis 500 Drive 230/24V/50Hz Mobile
For high-precision dosing of lubricants for tablet presses (e.g. magnesium stearate) and the feeding of powders for tablet coating Twin-screw compact feeder (T20 double full-blade fine) as volumetric feeder/differential feeder in pharmaceutical design Parts in contact with the product made of stainless steel 1.4404/1.4435 (AISI 316L) Dosing capacity 0.0019 dm3/rev Vertical agitator HMI KSU-II Controller module KCM-SD Multi-pin Harting plug with coupling on signal for connection to tablet press. Can also be connected directly to 240V after conversion Drive 230/24V/50Hz Mobile
Conveyor belt length 1,350 mm Conveyor belt width 100 mm Web spacing 30 mm, web height 5 mm Conveyor belt made of white plastic, as good as new Adjustable inclination 1 speed Dust compartment Mobile Drive 400V/50Hz ... más información
BÜHLER two-roll mill The two rollers are mounted in a stable, welded frame construction and can be inspected via inspection doors mounted on the side. The rollers are cooled automatically with temperature preselection and remote thermometers. A hydrodynamic roller pressure is installed for precise gap stability, whereby the gap size can be adjusted mechanically. Output: approx. 4,500 kg per hour with a fineness of approx. 120 - 220 my Roller width: approx. 900 mm All information according to the manufacturers brochure description, whereby equipment features may deviate from the standard.
HOF GT laboratory freeze dryer / Lyo (2,16 m2) for vials with „stoppering for completely inserting the bungs into the vials after the freeze drying process is completed, 6+1,shelves, usable shelve area 600 x 600 mm (WxD), distance of the shelves 6 x 110 mm, chamber capacity 645 litres, working temperature of the chamber from -80°C up to +80°C, working pressure of the chamber from +0,01up to -1 bar, electrics 400V/3Ph/50Hz, 37 kW, Siemens SIMATIC S7-300, machine floor space approx. 2420 x 1160 mm (WxD), machine height approx. 2620 mm, machine net weight approx. 2600 kg, including Containment-Cooling-Technology (EX-Zone 2, Temperature class T1) which is conform with the new EU’s F-Gas regulation, cooling medium R170 with a capacity of 1,3 kg and R1270 with a capacity of 5,5 kg, working pressure 23 bar
Measuring tank ZPC1000 -986L. (with GUM type approval) It is a tank used in the production of alcoholic beverages. New, never been in operation. ... más información
Used stainless steel tank with stirrer TERLET capacity approx. 300 l. ... más información
Unused De Dietrich DN1400 2216 litre total capacity vertical glass lined receiver vessel. Nominal capacity 2000 litre. Unit has welded dished top and welded dished bottom heads. Internal rated 3 bar design pressure at 0 to 110 deg.c. Has a top clamped manhole diameter DN500 with (4) flanges - outlet/inlet. Also has a two side flanges DN50 and central bottom discharge flange DN76. Mounted on (4) carbon steel legs. Also equipped with lifting eyes.