Fabricante:
(Categoría: 705)
Friction feeder: • For inserting brochures/booklets etc. • Speed max. 240 m/min • Product width max. 90 mm • Speed infinitely variable • Code reading Laetus with camera wt880 and bad ejection • HMI touch screen Turret magazine: • 16 stacking slots for product W x L 53 x 100 mm, stacking height 440 mm • Output range stacking height up to 2m/min, single up to max. 200 products/min • Product quality min. 80 g/m² (paper) • Positioning accuracy +/- 1 mm • HMI touch screen • Drive 230V/50Hz
Permissible load 1,500 kg Mixing blades in container lid Chopper unit, removable Ceiling bearing Light curtain Approach station for containers PLC Siemens S7-300 CPU 313C Danfoss servo inverter HMI Siemens Touch Panel Project management Printer 4 Bohle MCG 1600 mixing containers (photo shows MCG 1200, not supplied) Jungheinrich EJC 210 container pallet truck, rated load capacity 1,000 kg Container floor scale Bizerba with printer, weighing range 10.0 -1,500.0 kg Drive 400/24V/50Hz/8.75KW Possibly with qualification documentation Only 712 operating hours! The mixer is ready for operation in a pharmaceutical company in northern Germany and can be inspected there by arrangement. Available from week 32/2024
• Air-condensed water recooler • Nominal cooling capacity 1920 W • Thermoregulator from +15° to +27°C • Flow rate 8-30 l/min • Thermoplastic tank 5.5 l • Coolant R404A • Mobile • Drive 230V/50-60Hz ... más información
• Air-condensed water recooler • Nominal cooling capacity 1920 W • Thermoregulator from +15° to +27 • Flow rate 8-30 l/min • Thermoplastic tank 5.5 l • Coolant R404A • Mobile • Drive 230V/50-60Hz ... más información
• Automatic/semi-automatic operation • Running direction from right to left • Packaging dimensions max. (w x l x h) 380 x 600 x 160 mm • Film width max. 550 mm • Film roll diam. max. 300 mm, core Ø 77 mm • Film thickness 15-50 ym • Sealing temperature 0-230°C • Rewinding of residual film • Shrink tunnel • Powered outfeed belt with sluice • Mobile on rollers • Foot switch • 7 pcs. unused film roll • Switch control • Drive 380V/50/60Hz
• For brochures, leaflets • Horizontal extension arm type 150, length 245 mm • Leaflet size: length max. 55 mm, width 50-105 mm • Speed max. 115/min, max. 20,000 leaflets/h • Adjustable amount of leaflets to be dispensed • Control unit VS-2002 right • Barcode reading leaflet • Ejection of bad leaflet with ejection counter-check • Double-sheet detector • Fill level control magazine • Control via 18-pole plug-in coupling • Electr. connection 90-240V/50-60Hz
• Carton sealer for upper carton flaps with C-strip • Output max. 1,200 cartons/h • Carton dimensions (W x L x H) 150-500 x 200-600 x 100-600 mm • Sealing unit K11R for tape width 50 mm, roll diam. max. 410 mm, core diam. 76 mm • Lateral conveyor belts • Manual adjustment of carton size • Automatic folding device for upper carton flaps • PLC Siemens S7-1211C • Height adjustable • Drive 380/415V/50Hz
• For brochures, leaflets • Horizontal extension arm type 150, length 245 mm • Leaflet size: length max. 55 mm, width 50-105 mm • Speed max. 115/min, max. 20,000 leaflets/h • Adjustable amount of leaflets to be dispensed • Control unit VS-2002 right • Double-sheet detector • Fill level control magazine • Control via 18-pole plug-in coupling • Electr. connection 90-240V/50-60Hz
• For the packaging of products in three-side sealed tubular bags made of half-tubular films (PP, PE, PVC). • Output max. 40 products/min • Product sizes min. (l x x h) 100 x 50 x 10 mm, product length unlimited • Infeed conveyor w 350 mm, l 2,000 mm • Welding width max. 380 mm • Infeed height max. 200 mm • Film width max. 550 mm • Foil roll diam. max. 350 mm • Film thickness 15-50 ym • Longitudinal and transverse sealing • Residual film rewinder • Print mark control • Perforating unit • Automatic operation via light barriers • PLC Siemens S5-100 CPU 103 • Lauer control panel • Drive 400V/50Hz/6kW • 2 spare welding bars • Shrink tunnel SC 4030 SD • Throughput width 450 mm, throughput height 300 mm • Roller conveyor, bars adjustable rotating/non-rotating • 2 heater fans • power 18 kW, contactor control
Automatic filling line for small to medium batches of vials, ampoules, tubes in frames or trays, consisting of X, Y-filling robot and peristaltic pump: X,Y-filling robot with 1 filling station: • Filling area width max. 555 mm, depth max. 345 mm • X, Y positioning max. +/- 0.5 mm • Object height max. 250 mm • Operating system Windows XP Professional Peristaltic pump: • Accuracy +/- 0.5 • 2 pump speeds 72+225 rpm • Dosing 0.5-1000 ml depending on tube-diam. • Flow rates 2.1-40.7 ml/sec depending on tube-diam. • Tubing diam. 3, 5, 8 mm • Manual or automatic mode • Delay in automatic mode 0.5-9.5 sec in 0.5 sec steps • Recirculation to dispensing vessel • With keyboard and mouse, without monitor, without undertable • Drive 240V/50/60Hz
• Drive MCP-Process (ISM915) • Speeds 1-240 rpm, accuracy 0.1 rpm • Protection class IP 65 • 1-channel pump head Pro-380 (ISM791) with 3 stainless steel rollers • Pump head removable for cleaning • Flow rate 0.45-3,400 l/min depending on hose dimension • For tubing thickness 1.6 mm • For hose inner Ø 1.6-11.1 mm • 3 interfaces (analogue, 2x RS 232) • Drive 85-264V/47-60Hz • Last maintenance 11/2021
• Semi-automatic filler for manual object feeding • Single dosing via foot switch or continuous operation after pressing the foot switch once • Number of cycles infinitely variable max. 2,200 fillings/h • Filling range 0.2-125 ml depending on pump • 1 rotary piston pump filling range 1-10 ml with filling needle • Suction pressureless • Preset counter • Filling volume coarse and fine adjustment • Without foot switch, object contact prism, filling needle holder and lower table • Switch control • Drive 230V/50Hz
• Load capacity 110 kg • Drum holder for drums Ø 430 mm, drum weight max. 100 kg • Lifting height of drum lower edge above floor max. 1,400 mm • Two-speed remote control (50 % and 100 %) • Central brake bar • Mobile • Electrically rechargeable with battery charger 230 V ... más información
• Load capacity 125 kg • Drum holder for drums appr. diam. 430 mm, drum weight max. 100 kg • Lifting height of drum lower edge above floor max. appr. 1,400 mm • Two-speed remote control (50 % and 100 %) • Central brake bar • Mobile • Electrically rechargeable with battery charger 230V/50Hz
• Air-condensed water recooler • Nominal cooling capacity 2700 W • Thermoregulator from +15° to +27 • Volume flow 8-30 l/min • Thermoplastic tank 5.5 l • Coolant R407C • Mobile • Drive 230V/50-60Hz ... más información
• Semi-automatic filler for manual object feeding • Single dosing via foot switch or continuous operation after pressing the foot switch once • Number of cycles infinitely variable max. 2,200 fillings/h • Filling range 0.2-125 ml depending on pump • 1 rotary piston pump filling range 1-10 ml with filling needle • Suction pressureless • Preset counter • Filling volume coarse and fine adjustment • Without foot switch, object contact prism, filling needle holder and lower table • Switch control • Drive 230V/50Hz
• Air-condensed water recooler • Nominal cooling capacity 2700 W • Thermoregulator from +15° to +27 • Flow rate 8-30 l/min • Thermoplastic tank 5.5 l • Coolant R407C • Mobile • Drive 230V/50-60Hz ... más información
• Stirring volume max. 200 l • Stirring speeds 100-1,000 rpm • Mounting plate 180 x 180 mm • Effective power 80 W • Max. Shaft torque 50 Ncm • Control unit Cimarec Telemodul 40 M (stirring start, stirring time, speed) • Mounted on a mobile stainless steel frame with inclined mounting plate with counter support (format part) for mounting a vessel with Ø 235 mm • Drive 230V/50-60Hz
• Equipped for toploader boxes • Output max. 20 cartons/min • Blank magazine • Blank transport • Gluing station with 2 glue nozzles for side flaps with Robatec Concept 4 hotmelt gluer • Folding station with folding stamp • Carton discharge with outfeed conveyor • Vacuum generation with Venturi nozzles • Touch screen Siemens Pro-Face • Elau Pac-Drive control with 1x Max-4 and 4x MC-4 • 4 formats for toploader cartons: • Blanks: 225x204, 284x263, 284x348, 397x458 mm • Ready glued WxDxH in throughfeed direction: 70x95x35, 70x95x65 mm and 70x182x65mm, 70x182x120 mm, other formats possible • Drive 24/400V/50Hz • Qualification documentation (IQ/OQ)
• 10-track for thermal foils, max. temperature 220°C • Intermittent operation • Output max. 45-50 cycles/min (450-500 sticks/min) • Volume dosing (10 dosing slides) for mini tablets/granules/powder free-flowing 250 -1500 mg/bag • Bag lengths adjustable 50-155 mm • Bag widths depending on format set, with format set for belt width per bag 46 mm, finished bag width 18 mm • Product suction via Piab Vacuum Conveyor • 10 hot-stamping units Schmucker PL 1B MB, single-line, 17 types • Cutting knife for tear notch • Horizontal knife • Ionisation unit Haug for ionisation product infeed • Dust extraction • Outfeed belt 10-lane, e.g. for connection to 10-track 100% checkweigher (see our item no. 10-0219) • Lateral conveyor belt for bad bags • Transport trolley for film reel • PLC Siemens S7-300 • Electr. connection 380V/50Hz