subcategorías
(el tercer nivel de categoría)
Fabricante:
(Categoría: 110)
Round table probably Walter with a diameter of 380 mm. ... más información
Inv. Num. : 7571 Type: M 3000 Producer: Samsys Created: 2007 Parameters: Maximum rod length: 1240 mm Rod diameter: 65 mm ... más información
nv. Num. : 7572 Type: BOSS 322E Produzent: IEMCA Erzeugt: 2012 Parametern: Maximale Stablänge: 3200 mm Gewicht: 830 kg ... más información
Inv. Num. : 5413 Type: SN 542 Producer: FEDEK Created: 2008 Parameters: Maximum bar length: 3000 mm Rod diameter: 42 mm Weight: 800 kg Length: 4000 mm Width: 1000 mm Height: 1500 mm ... más información
Inv. Num. : 6118 Type: Liftmaster L3030 Producer: TRUMPF Created: 2002 Parameters: In good technical condition. ... más información
The NOVOTECNIC EUROPA FTD-6 E-39 oil mist separator was built in 1992. Technical parameters: - capacity: 2000 l - nominal filter capacity: 500 l / min - filter unit:> 0.003-0.005 mm - connection power: approx. 15 KW - machine dimensions (L x W x H): 4000 x 1200 x 2800 mm - weight: approx. 2000 kg
2 pieces hydraulic power units , volume 63 liters , drive 2.2 KW , volume flow 4.5 liters ... más información
Euromate SCS + Coral PR/7.5 - Dust Extraction / Welding Fume Extraction Euromate SCS Air Filtration System - Air filter for welding fumes - 2 cartridge filters (need to be replaced) - Year of construction 2001 Coral PR/7.5 Extraction System - Motor power 5.5 kW - Speed 2800 rpm - Inlet diameter 400 mm - Year of construction 2002
Aigner Air Jet 4 - Abrasive dust extraction Dry sanding of various materials often produces dust that is harmful to health. An effective solution for this is the use of an abrasive dust extractor. This device reduces dust emissions and helps to comply with the particulate matter limits: 5 mg/m³ in Austria and 1.25 mg/m³ in Germany. - Aigner Air Jet abrasive dust extraction - EC pipe extraction arm - Powder extinguishing system with detection line - incl. documents - Year of construction 2020 Specification - Max. air flow: 5000 m³/h - Max. pressure: 5000 Pa - Filter: 4x 13 m² - Dust: 10 g/m³ - Nominal power/current: 7.5 kW / 35 A - Nominal voltage: 3x 400 V - Net weight: 560 kg
Stock number: 3894 PRESET DEVICE Manufacturer: Mitutoyo, Type: Linier Height 600 Year of Make: 0 Specifications: Manual. Movement 0-600 mm Digital readout Weight: 30 kg ... más información
- Guide channel (oil-damped) - Max. bar length: 3,200 mm - Including guide channel Ø 26 mm - Dimensions LxWxH 4,700 x 900 x 1,400 mm last mounted on Ergomat TDA 26 ... más información
The Lift S44 magnetic lifter, produced by Lift OY Jämsänkoski, is designed for handling flat ferrous materials. It is capable of lifting weights up to 2 tons and operates on a 220 V, 50 Hz electrical supply, making it suitable for industrial use in metal workshops. The unit's duty cycle is rated at 100% ED, ensuring continuous operation without overheating, supported by a maximum load temperature tolerance of 130°C. This lifter is ideal for moving steel sheets and other magnetic materials efficiently and safely. Technical Specifications: Model: Lift S44 Voltage Requirements: 220 V, 50 Hz, 0.7 A Secondary Voltage: 24 V, 5 A, 2.4 Ah Maximum Temperature for Load: 130°C Protection Class: IP 41 Maximum Lifting Capacity: 2 tons Serial Number: 895/9
General: Year of construction 2013 Bar length 3.0M 3.200 mm Rod diameter 5 – 51 mm Overall length 4,060 mm Weight approx. 760 kg ... más información
Filter for powder coating / surface coating Offer: Filter cell for ITW Gema 592 x 592 x 292 mm in stock Price net 298 € pc. Filter cartridge standard 327 x 605 mm Price net 114.00 pcs Powder coating / sand & ball beam systems / welding fumes and ventilation systems . Cartridges / cassettes / suspended fabric / pocket filters / cassettes in aluminium and stainless steel . Special production possible. Service and advice. Pradler Maschinen Service Anerkanter Maintenance Technician Mobile: 0171 / 4513691 Tel. 05242 / 43186 Fax. 05242 / 47898 email to : info@pradler Mfg. Pradler Maschinen Service 05242 / 43186
UP Mini , Uni Push Repair / inspection and replacement pradler gear technology Pradler Transmission Technology info@pradler.com Service and Replacement PradlerGetriebetechnik.de Tel. 05242 / 43186 email: info@pradler ... más información
Filter for powder coating / surface coating Offer: Filter cell for ITW Gema 592 x 592 x 292 mm in stock Price net 298 € pc. Filter partone f. Wagner ESB 327 x 605 mm Price net 108.50 pcs Filter cartridges / absolute cells / pocket filters / welding fumes / blasting systems / cassette filters in aluminium and stainless steel . Special production possible Advice in the field, powder coating/surface. Welding smoke/ventilation Mobile 0171 / 4513691 Pradler Machine Service Mobile: 0171 / 4513691 Tel. 05242 / 43186 Fax. 05242 / 47898 email to : info@pradler Mfg. Pradler Maschinen Service 05242 / 43186
Filter cartridges for AGIE sinkers Electrolyte filter cartridge Filter cartridges NEW and org. Packed Technical data please clarify briefly Tel. . Electrolyte filter cartridge Price pcs. 85 € net Complete. Sentence 6 pcs. New and Org. Packed 480 € Net plus 19% tax, freight and packaging Pradler Machine Service Tel. 05242 / 43186
Machine vice ATS NC-130VH Year of construction 2023 Jaw width: 130 mm Jaw height: 55 mm max. wingspan inside: 220 mm max. wingspan outside: 380 mm with pull-down function Clamping force : 35kN Weight: 40 kg As good as new Delivery possible ... más información
Machine vice rotary-swivel ATS –DSB-100 Jaw width: 100 mm Jaw height: 36 mm Total height: 200 mm 50° swivel Spans: Pos. 1: 0-60 Item 2: 57-120 Item 3: 117-180 Clamping force : 25kN Weight: 25 kg 1 piece available Delivery possible Price is net price plus VAT. VAT ... más información
Machine vice ATS NC-200VH Year of construction 2024 Jaw width: 200 mm Jaw height: 63 mm Total height: 173 mm Total length: 700 mm max. wingspan inside: 330 mm max. wingspan outside:540 mm with pull-down function Clamping force: 45kN Weight: 81 kg Delivery possible ... más información