tornos usadas para la venta

DMG CTX 310 ECO CNC lathe was built in 2011. The machine, characterised by high productivity and precision, is designed for machining workpieces with a maximum diameter of 200 mm. The machining process is performed inside a large working area using reliable components in the form of a high-speed spindle and cutting tools. During the turning process, a specially designed inclined bed effectively eliminates any vibrations and oscillations, ensuring the highest possible process stability. The offered DMG GILDEMEISTER CTX 310 Ecoline CNC turning center also features an integrated chip conveyor and a perfectly optimised SIEMENS CNC control. The total weight of the machine is 3400 kg. Technical data of the DMG CTX 310 ECO turning center - maximum turning diameter: 200 mm - maximum swing diameter: 330 mm - maximum swing diameter above cross guideway: 260 mm - feed in the X/Z axis: 160/45 ...

DMG GILDEMEISTER CTX 510 CNC turning center was built in 2008. Designed for machining workpieces with a maximum diameter of 465 mm, the machine features a fully illuminated workspace, a high-speed spindle and high-end cutting tools. The extremely stable design combined with the perfectly optimised SIEMENS CNC control ensures maximum process efficiency, even during the most intensive production work. The DMG CTX 510 CNC lathe weighs 7500 kg. Technical specifications of the DMG GILDEMEISTER CTX 510 lathe - maximum turning diameter: 465 mm - maximum swing diameter: 680 mm - maximum swing diameter above cross guideway: 465 mm - feed in the X/Z axis: 300/1050 mm - rapid traverse in X,Z axis: 30 m/min - maximum spindle rotational speed: 3500 rpm - spindle passage: 76 mm - spindle drive power (40%/100% DC): 42/31 kW - operating hours: 13902 h - installed power: 50 kVA - power supp ...

DMG GILDEMEISTER CTX ALPHA 300 CNC turning center was built in 2008. The machine, designed for machining workpieces with a maximum diameter of 500 mm, is equipped with state-of-the-art technical solutions that guarantee extraordinary accuracy and precision. Machining is performed inside a large, fully illuminated workspace by a reliable spindle and high-quality cutting tools taken from a 12-position turret. In turn, the operator is provided with a state-of-the-art touchscreen control panel with a perfectly optimised FANUC CNC controller. High reliability, precision and structural stability make the GILDEMEISTER CTX ALPHA 300 CNC lathe the perfect choice for even the most intensive production work. The total weight of the machine is approximately 4350 kg. Technical data of the DMG GILDEMEISTER CTX ALPHA 300 lathe - maximum turning diameter: 500 mm - maximum cutting diameter: 200 mm  ...

DMG CTX 510 ECO CNC turning center built in 2011 is used for precision machining of workpieces with a maximum diameter of 465 mm. This extremely efficient and perfectly optimised machine features a specially constructed, inclined bed that effectively dampens all vibrations and oscillations. This solution ensures the highest possible process stability, bringing results such as improved workpiece surface quality or increased cutting tool life. Workpiece machining is carried out using reliable components in the form of a high-speed spindle and cutting tools taken from a 12-position turret. Tools are changed in a very short time, so that the overall process time is significantly reduced. The DMG GILDEMEISTER CTX 510 ECO CNC lathe also features an intuitive SIEMENS CNC control and an integrated chip conveyor. The total weight of the machine is 7800 kg. Technical parameters of the DMG CT ...

DOOSAN LYNX 220 LSYC 5-AXIS CNC turning center was built in 2014 in South Korea. In order to meet all production requirements, the machine uses state-of-the-art components and technologies, which combined with an extremely stable design offer the best precision and turning performance in its class. In addition, the offered equipment allows even the most intensive machining process to be streamlined and fully automated in any production facility. Workpieces with a maximum length of 510 mm are machined inside a large working area with two high-speed spindles. During the machining process, the specially designed bed of the machine effectively dampens all vibrations and oscillations, resulting, e.g. in improved workpiece surface quality and increased tool life. The offer includes a wide range of equipment, such as the Y axis, bar feeder, measuring probe and the intuitive DOOSAN FANUC i ...

DOOSAN LYNX 220 LMSC CNC turning center was manufactured in 2015 in South Korea. This extremely efficient and reliable machine is able to streamline even the most demanding machining process in any production facility, thanks to the use of, among others, two high-speed spindles and an extremely stable design. Workpieces with a maximum diameter of 240 mm and a length of 510 mm are machined inside a large working area equipped with a specially designed bed. The bed effectively dampens all vibrations and oscillations, resulting in a better quality of the machined surface and increased service life of the cutting tools. To this date, the DOOSAN LYNX 220 dual-spindle CNC lathe has worked a total of 2198 hours and has been used exclusively for machining stainless steel. The total weight of the machine is 3400 kg. Technical data of the DOOSAN LYNX 220 LMSC CNC lathe General data - feeds in ...

AFM TAE 25N CNC turning center was built in 1997 by the Polish company AFM ANDRYCHÓW. The highly efficient machine, which is used for unit or series production, is ideal for any industrial plant with an emphasis on quality and precision. The turning process of workpieces with a maximum diameter of 300 mm is performed automatically in a large work area equipped with a 12-position SAUTER tool head and a reliable spindle. All parameters are porgrammed in the intuitive SIEMENS SINUMERIK 840D CNC controller, which reduces the operator’s need to operate the machine to a minimum. The AFM TAE-25N CNC lathe weighs 4200 kg. Technical specifications of the AFM TAE 25N turning center - working feed of longitudinal slide (X axis): 385 mm - working feed of transverse slide (Z axis): 150 mm - working feed rate range in the X,Z axis: 0-15000 mm/min - rapid traverse in the X,Z axis: 15 m/min - ...

DOOSAN LYNX 2100 LMA CNC turning center was manufactured in 2021 in South Korea. The machine offers best-in-class turning performance and precision, thanks to a wide design, a highly stable bed, a low-vibration spindle and a full guide guard that protects against coolant leaks and chips from entering into the machine. All this makes the DOOSAN LYNX 2100LMA CNC lathe ideal for any industrial facility where quality and precision are top priorities. The used spindle is driven by a reliable electric motor with high power, which is used for the versatile use of tools taken from the 12-position headstock. The turret, on the other hand, is controlled by a powerful servomotor which guarantees fast and accurate tool selection. All machining parameters are programmed in the intuitive DOOSAN FANUC i Series CNC control with many useful features, whose excellent optimisation allows maximising mach ...

KNUTH PICO TURN CNC lathe built in 2015 in Germany is the ideal choice for small-scale industries focused on unit and small batch production. Due to its extensive machining capabilities, sturdy design and high productivity, this compact size machine performs excellently in, among others, precision arc turning, threading and longitudinal and transverse workpiece turning. All operations are performed by a powerful spindle with variable speed adjustment between 150 and 1750 rpm. The KNUTH PICO TURN CNC lathe is additionally equipped with, among others, an automatic 4-position tool changer, an intuitive SIEMENS SINUMERIK 808D CNC controller and a 3-jaw chuck with a diameter of 125 mm. The total weight of the machine is 400 kg. Technical specifications of the KNUTH PICO TURN mini metal lathe machine - feed rates in the X/Z axis: 500/250 mm - rapid traverse in the X/Z axis: 2000/1000 mm/m ...

DMG GILDEMEISTER CTX 310 CNC turning center was manufactured in 2002. The machine with its small size and extensive equipment can fully automate the machining process of workpieces with a maximum diameter of 390 mm while maintaining high precision and reduced operating costs. The GILDEMEISTER CTX 310 CNC lathe is equipped with a 12-position tool head, an easy-to-use SIEMENS SINUMERIK 840 D CNC controller and a reliable powerful spindle rotating at a maximum speed of 5000 rpm. The total weight of the machine is 3400 kg. Technical specifications of the DMG GILDEMEISTER CTX 310 lathe - CNC controller: SIEMENS SINUMERIK 840 D - turning diameter (in tusk): 390 mm - turning diameter (over bed): 310 mm - minimum turning diameter: 8 mm - maximum spindle rotational speed: 5000 rpm - spindle passage diameter: 50 mm - 12-position tool head - tool holder: VDI 30 - operating hours: 35979 ...

MAZAK MULTIPLEX 6100Y CNC turning center which was built in 2001 in Japan can fully automate the machining of workpieces with a maximum diameter of 500 mm, while maintaining high accuracy and precision. Turning takes place inside a large work space equipped with a rigid bed and a chip conveyor integrated into the coolant chute, designed to continuously evacuate the cuttings from the work area. In the machining process, the MAZAK CNC dual-spindle lathe uses tools housed in 12-position turret heads, distinguished by their reliable operation. Each of the two tool heads is 3-axis (X,Y,Z) and supports driven tools. In addition, to simplify and streamline turning, the workpiece can be machined on both spindles simultaneously and in link” mode, holding the bar in both chucks. The MAZAK ML TPLX 6100Y automatic lathe is also offered with a wide range of equipment, including the LNS QUICK  ...

MAZAK SQT 15MS CNC turning center built in 1992 in Japan, is the best choice for any manufacturing facility. All of this is due to the 12-position toolhead and two powerful spindles (main spindle and sub-spindle) that maximise turning efficiency while maintaining high accuracy and precision. There is also an easy-to-use MAZATROL T32-3 CNC controller with a colour screen through which all machining parameters are programmed in just a few steps. The total weight of the machine is 4700 kg. Technical specifications of the MAZAK SQT 15MS CNC lathe General data - feed rate in X/Z axis: 180/575 mm - maximum workpiece diameter: 300 mm - maximum workpiece length: 531 mm - bar diameter: 51 mm - X-axis positioning accuracy: ± 0.002 mm - Z-axis positioning accuracy: ± 7 s - C-axis positioning accuracy: ± 0.003 mm - tool clamping force: 42140 N - tool head indexing time: 1.4 s/full st ...

RAFAMET KCI 320/400N CNC vertical turret lathe manufactured in 2011 in Poland, can perform complex production programmes on large-size workpieces, thanks to one turning head and three milling heads set at different angles. The machine, with its compact frame structure made of high-quality grey cast iron, is distinguished by its high geometric stability, high rigidity and excellent vibration damping. The CNC vertical turret lathe KCI 320/400N performs precision turning, milling, drilling and boring of cylindrical, conical and curved surfaces with the aid of the applied heads. One of them is a special milling head (offset), used to perform drilling and milling operations with the position of the tool axis offset from the spindle axis in a direction parallel to the slide travel plane. On the other hand, the turning head allows to mount CAPTO turning tools in horizontal and vertical socke ...

GILDEMEISTER MF TWIN 65 Y CNC-Drehmaschine die 1999 in Deutschland gebaut wurde, ermöglicht vollautomatische Produktionsprozesse bei hoher Genauigkeit und niedrigen Betriebskosten. Die Maschine, die sich durch ihre umfangreichen Bearbeitungsmöglichkeiten auszeichnet, ist dank ihrer robusten Bauweise, der umfangreichen Ausstattung und dem Fokus auf hohe Produktivität ideal für jeden Produktionsbetrieb, selbst bei anspruchsvollsten Herausforderungen. Das CNC-Drehzentrum MF TWIN 65Y führt Präzisionsbearbeitungen von Metallwerkstücken mit einem maximalen Durchmesser von 200 mm durch, wobei zuverlässige Werkzeuge in zwei Werkzeugköpfen mit 12 Positionen (oben und unten) eingesetzt werden. Das Drehen der Werkstücke findet in einem großen Arbeitsraum statt, der mit einem um 45° geneigten, starren Bett und einem integrierten Späneförderer ausgestattet ist, der den Arbeitsraum sa ...

TORNOS MICRO-8 CNC turning centre built in 2008 in Switzerland is distinguished by its extensive machining capabilities, sturdy design made of the highest quality cast iron and compact size. The machine designed for ultra-precise machining of workpieces with a maximum diameter of 10 mm is equipped with two reliable spindles to maximise production efficiency in any production facility, even during the most demanding challenges. The main spindle and counter spindle with integrated thermal control, retractable collet and ceramic ball bearing run on guides with increased rigidity. Both spindles are powered by reliable FANUC motors, ensuring that the necessary power is supplied for the versatile use of all the cutting tools located in the 20-position linear magazine. The arrangement of the tools in the magazine has been made in such a way as to allow simultaneous machining on the main spin ...

STAR SB-20R type G CNC turning centre was manufactured in 2014 in Japan. The machine is distinguished from other machines of its type by its compact size and a range of features that allow it to perform virtually any type of machining on workpieces with a maximum diameter of 20 mm. The maximally durable and rigid design additionally ensures the incredible stability and rigidity of the process, required to achieve excellent turning precision and quality. Inside the large working area there are two spindles (main spindle and sub-spindle) with C-axis, which are driven by reliable high-power motors. The sub-spindle, in combination with the driven tools, allows completely independent machining after capture. The lathe also features a revolutionary guide sleeve change system, which allows the machine to switch between guide sleeve and no guide sleeve mode. The STAR SB20R type G Swiss-typ ...

STAR SV-38R CNC turning centre built in 2015 in Japan, stands out for its unparalleled flexibility and broad functionality, which makes the machine ideal for complex applications in many industries t.e. automotive or aerospace. With the help of two spindles (main spindle and sub-spindle) with C-axis, the STAR SV 38R CNC lathe performs precision machining of inclined surfaces, including front and back angle holes in up to 11 axes. Both spindles of the machine are driven by reliable, high-power motors, which is used for the versatile use of cutting tools taken from the tool holder or the 10-position turret tool head. A special system for guiding the end of the Z-axis spindle through the headstock also guarantees high rigidity and stability at the cutting point. The STAR SV38R lathe is offered with an extensive range of equipment, including an FMB turbo 5-55 / 3200 A bar feeder, workpie ...

C 6250 x 2000 conventional lathe was manufactured in 2010 in China. The machine, characterised by a rigid design with an induction-hardened bed significantly increases the production capacity of any workshop and factories with the utmost precision. The spindle, with adjustable speed from 11 to 1600 rpm is driven by a reliable and high-powered main motor, which is used for versatile tool use. The C 6250×2000 universal lathe with digital readout in three axes weighs 2640 kg. Technical data of the C 6250 x 2000 metal lathe - maximum workpiece length: 2000 mm - turning length in bridge choice: 210 mm - workpiece diameter (turning in bridge choice): 720 mm - workpiece diameter (turning above bed): 500 mm - workpiece diameter (turning over slide): 300 mm - longitudinal feed range: 0.028 – 6.33 mm/rev - transverse feed range: 0.014 – 3.16 mm/rev - maximum spindle speed: 1600 rpm ...

NAKAMURA-TOME SUPER NTM3 CNC turning centre was manufactured in 2004 in Japan. Distinguished by its wide machining capabilities and extensive equipment, the machine allows fully automated production processes, while maintaining high precision and reduced operating costs. The high-quality construction additionally effectively dampens any vibrations and ensures maximum process stability, which results in excellent turning results. Workpieces are machined in up to 11 axes using reliable tools stored in three 24-position tool heads. The NAKAMURA SUPER NTM3 CNC lathe is offered with an extensive range of equipment including a BREUNING IRCO SiMag bar feeder, a FANUC 16i-TB CNC controller and additional toolholders. The CNC dual-spindle lathe weighs 12000 kg. Technical specifications of the NAKAMURA-TOME SUPER NTM3 CNC lathe - number of axes: 11 - CNC control: FANUC 16i-TB - number of  ...

JANUS HTC2050 CNC lathe was built in Poland in 2010. The machine, characterised by high stability and operational reliability, uses the necessary equipment for high-speed and finishing machining, allowing for precise machining of internal holes, columns, cones, arches and all types of screw threads. The machine uses a high-speed spindle with infinitely variable rotation speed from 40 to 4000 rpm and a bed inclined by 45°, which facilitates chip removal and increases the cutting force transmitted by the horizontal bed and its head. Rear and front spindle angular contact bearings simultaneously transfer radial and axial loads, ensuring low spindle temperature rise and less thermal deformation during high-speed finishing. The JANUS lathe equipment includes a state-of-the-art FANUC Series 0i Mate-TC CNC controller, a chip conveyor and the tools shown in the photos. The total weight of th ...