Fabricante:
(Categoría: 105)
Inv. Num. : 7509 Type: DG 79/31 M Producer: Elumatec Created: 2009 Parameters: Maximum sawing speed: 2800 1/min Cutting length: 520 mm Wheel diameter: 380 mm Motor power: 3 kW ... más información
Inv. Num. : 4854 Type: TS 161/21 Producer: Elumatec Created: 2004 Parameters: Maximum saw speed: 3200 1/min Saw blade diameter: 280 mm Electrical connection: 230/400 V. 3~. 50 Hz Power output: 1.05 kW Machine dimensions: 650x750x1300 mm Machine weight:: 130 kg Accessories: Roller conveyor Two saws A Lesson Slices
Inv. Num. : 5876 Type: ARG 640 DC SAF Producer: PILOUS Created: 2016 Parameters: Minimum belt feed speed: 20 m/min Maximum belt feed speed: 90 m/min Cutting area: 640 mm Saw blade size: 5770x41x1.3 mm Total power requirement: 8.8 kW Length: 3800 mm Width: 2050 mm Height: 2500 mm Weight: 4200 kg Equipment: 2x roller conveyor G1000 (length 3000 mm)
Inv. Num. : 7318 Type: PSU 450 Producer: Behringer Created: 2006 Parameters: Wheel diameter: 450 mm Weight: 1150 kg Equipment: 4x Spare Disc ... más información
Inv. Num. : 7367 Type: 335 GA Producer: MEBA Created: 2012 Parameters: Minimum belt feed speed: 15 m/min Maximum belt feed speed: 150 m/min Saw blade dimensions: 4400 x 34 x 1.1 mm Cutting area: 335 mm Length: 5350 mm Width: 2300 mm Height: 2000 mm Weight: 2020 kg ... más información
Inv. Num. : 7179 Type: BS 740 RS3 Producer: FELDER Created: 2021 Parameters: Machine width: 860 mm Machine length: 1100 mm Machine weight: 500 kg Cutting height: 450 mm Saw blade length: 5365 mm Equipment: Automatic workpiece feeding ... más información
Inv. Num. : 6503 Type: ALU-U12 Producer: KASTO Generated: 2015 Parameters: Maximum sawing speed: 2800 1/min Spindle power: 1.5 kW Machine dimensions: 650 x 800 x 1300 mm Machine weight: 150 kg Equipment: Saw blade ... más información
Semi-automatic metal band saw Capacity round: 330 mm - Horizontal powerful band saw machine, ideal for regular intensive use on harder metals such as iron and steel - Two-way miter cut (from 0° to 60° left and 45° right) - Infinitely variable belt speed due to INVERTER from 20 to 105 m/min - Hydraulic vice - Replaceable work table - Cast iron saw frame on double cone bearings and ring nut for more stability - Precision band saw guide with carbide pads, bearings and corrosion protection - Limit switch for adjusting the saw frame return directly above the material to be cut - Automation is controlled by a safety relay - Low work table for easier loading of heavy materials - Solid cast iron vice with handwheel and quick-release lever - The vice is equipped with a practical handle for fast movements and mounted on a rail to allow lateral displacement - Control is via a mob ...
- pneumatic swivelling of the saw head - pneumatic workpiece clamping - incl. operating instructions in German - Year of construction 1996 Specifications - Saw blade Ø: 450 mm - Miter range: +/- 45 ° - Connection voltage: 400 V - Dimensions WxHxD: approx. 1050 x 1600 x 1300 mm - Weight: approx. 500 kg
Imet Record 315/350 - Cold Saw - Suitable for cutting metal profiles and solid materials up to 70 kg/mm² - Mitre cuts from 0 degrees to 45 degrees left and right - Quick-release double vise - HSS saw blade - Pedestal with storage cabinet Specification: Cutting Capacity - 0°round: 125 mm - Square: 110 mm - Rectangular: 160 x 90 mm Cutting capacity 45° left: - Round: 105 mm - Square: 90 mm - Rectangular: 80 x 100 mm Cutting capacity 45° right: - Round: 70 mm - Square: 65 mm - Rectangular: 60 x 70 mm Machine data: - Saw blade size: 350 / 32 mm - Saw blade speed: 30 / 60 rpm - Motor power: 1.8 / 2.5 kW - Coolant tank: 40 l - Machine dimensions WxHxD: 770 x 1900 x 1200 mm - Weight: approx. 210 kg
Cutting range round 0°: 127 mm Cutting area flat 0°: 125 x 130 mm Cutting range round 45° right: 90 mm Cutting area square 45° right: 90 x 90 mm Cutting range approx. 60° right: 45 mm Cutting area square 60° right: 45 x 45 mm Vice opening: 130 mm Band saw blade dimensions: 1440 x 13 x 0.65 mm Cutting speeds: 30 - 80 m/min Motor power: 0.55 kW Voltage: 230 V Weight approx.: 25 kg Characteristics: - Two cutting speed levels for optimal adaptation to the workpiece - For miter cuts, the saw bracket can be swivelled up to 60° - Including workpiece stop for rational work - Optimum cutting results thanks to band saw blade guide with ball bearings - High-torque engine, even under continuous load - Under load, the motor electronics keep the cutting speed largely constant - Environmentally friendly, as there is no need for lubricating and coolant fluids - Smooth, low ...
material dimensions max. round: Ø 380 mm max. square: 380 x 380 mm segment length with single stroke: 10 - 510 mm with multi stroke: max. 4590 mm dimensions LxWxH: 3100 x 2200 x 1850 mm weight: 3.100 kg ... más información
Qty. 1 Second-hand hot circular saw Mfc.: TBA Built – Bj.: 1950 overhauled 1972 Saw blade dia. – Sägeblattdurchm.: 1,600 mm Saw blade feeding with hydraulic drive Sägeblattvorschub mit hydr. Antrieb Hydraulic station Hydraulikstation Dimensions of piece for cut: min./max. 70 / 185 mm square Abmessungen des zu schneidenden Materials: min./max. 70 / 185 mm
- Cutting speed: 6 - 30 m/min - Saw blade dimensions: 400 (425) x 50 x 5 mm - Cutting range 45° flat: 180 x 40 mm - Cutting range 90° flat: 240 x 70 mm - Cutting range 90° round: 140 mm - Cutting range 90° square: 130 mm - Miter cut: infinitely variable 60 -/+ degrees - Saw blade feed speed: 0 - 1,200 mm/min - Minimum quantity lubricating system: PPS 401 115326 - Autom. Flat magazine FMA for rods: 1500 - 7000 mm - Control: Kaltenbach MULTI-COM - Chip conveyor - Total power: 5.5 kW - Machine weight: 4500 kg - Dimensions (W x D x H): 9.45 x 2.59 x 2.1 m - Power-on hours: 17290 h - Condition: very good details fully automatic universal saw, workpiece stop for inclined cuts to the left and right, work space lighting, section gripper with autom. Adjustment of the front gripper jaw, sorting device with drive, sorting of good parts, very well maintained system acce ...
IRON SAW Cutting diameter: 100 mm Blade dimensions: 280 mm Speed range: 10, 20, 40, 80 RPM Cutting range 90 ° flat: 120 x 100 mm Cutting range 90 ° round: 100 mm Length stop: 500 mm Semi automatic electric fence Automatic sawing cycle Pneumatic clamping prepared for pneumatic feeder Total power: 1.5 kW Machine weight: 700 kg Condition: good Accessories: 18 blades, roller conveyor 2 m
Cutting diameter: 340 x 200 mm Section 45° round: 230 mm Cutting speed: 20-120 m / min Stroke: 600 mm Blade dimensions: 4770-4870 x 32 x 1 mm Total power: 4 kW Machine weight: 1400 kg Dimensions (W x D x H): 2.6 x 1.4 x 1.6 m semi-automatic flow, heavy duty machine, good condition, ready for use
Petzing & Hartmann / Pehaka US 5 - N, vertical band saw Two-stage band saw motor Stage 1 speed 15 - 220 rpm (infinitely variable Stage 2 Speed 150 - 2200 rpm (infinitely variable) Work table 750x700mm with stop Work table swivel / tilt Passage - column / band saw 510mm Swxmlk Saw passage (height) approx. 420mm Ideal - strip welding device Emergency/ Off Speed indicator Saw blade - length 4100x3-20mm Dimensions: LxWxH 1.4x1x2.3 meters Weight 450Kg
ELUMATEC SA 142/35 automatic circular sawing machine was built in 2001 in Germany. This extremely powerful machine is used for the precise and fully automatic cutting of aluminium and PVC joinery. The workpieces are fed into the workspace on roller conveyors with a option of single, double or triple feeding by means of a special switch. Material infeed is also supported by clamping cylinders, which ensures that the process runs safely and without any interruptions. The material is then cut into the large work space by a reliable circular saw with the option to freely adjust the cutting angle from 90° to 45°. The ELUMATEC aluminium profile sawing machine has so far only been used for cutting aluminium profiles. The total weight of the machine is 770 kg. Technical specifications of the ELUMATEC SA 142/35 aluminium sawing machine - cutting angle: 90° to 45° - maximum cutting uni ...
ELUMATEC SA 142/36 automatic circular sawing machine produced in 2001 in Germany is designed for cutting aluminium and PVC joinery at a constant 90° angle. In the machining process, the machine uses a reliable circular saw with a diameter of 500 mm, which ensures incredible cutting quality while achieving short work cycles. The material is fed into the workspace on roller conveyors with the option of selecting single, double or triple feeding by means of a special switch. The installed horizontal cylinders further ensure that the process is carried out safely. Until now, the ELUMATEC aluminium sawing machine has only been used to cut aluminium profiles. The total weight of the machine is approximately 800 kg. Technical data of the ELUMATEC SA 142/36 aluminium profile sawing machine - cutting angle: 90° - cutting unit feed length: 650 mm - feed length per work cycle (90° cut): ...
KALTENBACH KKS 400 NA automatic circular sawing machine built in Germany is used for the precise, fully automatic cutting of flat bars, angle bars, profiles and tubes. The machine uses a reliable drive with hardened and ground helical gears, which, in combination with the electronic cutting height adjustment and the fast reverse movement of the cutting disc, ensures smooth operation and short cutting times, even during the most demanding processing. A large workspace with a clamping element stiffens the material during cutting, ensuring that the workpiece is held firmly and securely on both sides of the 400 mm diameter blade. The KALTENBACH circular sawing machine is offered with, among others, a material feeder, chip conveyor and convenient to use PLC control. Technical data of the KALTENBACH KKS 400 NA circular sawing machine - PLC control - machinable materials: steel, stainless ...