La indicación de distancia no es posible porque no se pudo determinar su ubicación. El requisito previo es que su navegador permita las cookies y la determinación de la ubicación.

subcategorías
(el tercer nivel de categoría)

más 1097

 

Fabricante:
(Categoría: 106)

AB 1
ABK 1
ABM 1
AS 1
BMW 1
EBU 21
EHT 17
ETP 1
FMS 3
HACO 10
HBM 3
HM 1
HSP 1
IHI 1
IWK 2
JKM 2
LAG 1
LBM 2
LUX 1
LVD 8
MAE 8
MFD 1
MHF 1
MIB 1
MSB 1
NB 4
OMC 1
PMB 2
PME 1
RAS 2
REIS 17
prensas / 高速压力机
Máquina: BRUDERER BSTA 18 High Speed Presses
Número de artículo: 146864599
usado

Stroke power: 180 KN (18 tons). Adjustable speed: 100 - 600 strokes per minute. Adjustable stroke: 4 - 36 mm. In very good working condition. Feeder: BBV 60/60 Max. Strip Width: 60 mm. Max. Feeding Length: 60 mm. Max. Thickness: 2 mm. With stroke and speed counter. Programmable speed, number of strokes etc. Three working modes: manual, one stroke and automatic. Heavy Duty, for non stop production. Pneumatic clutch and brake. Machine with warranty 6 months. Machine dimensions: 600 mm x 600 mm x 1850 mm. Machine weight: approx 1.2 tons. Power consumption: 2.2 KW. Technical Air: 8 bar.

prensas / 高速压力机
Máquina: BRUDERER BSTA 110H 高速压力机
Número de artículo: 158031323
Año de construcción: 1976
usado

Bruderer Automatic Precision Punching Press. Type: BSTA 110H. Max. Pressure: 1100 kN (110 T). Speed range: 100 – 800 spm. Year of production: 1976. Fitted with roller-gripper feed unit BBV 320/200 on left-hand side. Max. strip width: 400 mm. Max. strip thickness: 12 mm. Max. feeding pitch: 200 mm. Adjustable stroke: 16-75. Ram height adjustment: 89 mm. Max. Tool width clearance between columns: 1170 mm. Weight of machine: cca. 26000 kg. Electrical cabinet and control. Oil pump. Oil cooler. Fitted with spring feet dampers. Front and rear safety guards with inspection glass.

prensas / 高速压力机
Máquina: MABU 25 VPR 高速压力机
Número de artículo: 163078621
Año de construcción: 1998
usado

Make: MABU Model: 25 VPR. Made in Germany. Max. Pressure: 250 [kN] (25 [T]) Speed range: 80-400 [spm]. Year of manufacture: 1998. Operating modes: Manual, One-cycle and Automatic. Equipped with two hand start and foot-clamp start. Fixed stroke: 17 [mm]. Ram adjustment: 40 [mm]. Max. Tool dimensions: 400 x 400 [mm]. Power: 3 [kw]. Current: 230 / 400 [V]. Air connection: 5.5 [bar]. Feeder: Silicon SFS 200 on left-hand side. Max. strip width: 200 [mm]. Machine dimensions: H 2350 x W 1700 x D 1400 [mm]. Weight of machine: cca. 2500 [kg]. Electrical cabinet with Mabu Pf 1.3 control. Front and rear safety guards with inspection glass. Technical documentation and operating instructions in English and German included. CE certificate and EUR-1 certificate of origin. On stock, tested and ready for delivery. More used machines from Mabu, Bruderer, Bihler and Schaal available ...

Máquina: ERFURT PKZV800FS H形结构冲压成型机
Número de artículo: 165055003
usado

The press was completely overhauled in 2003 by ZDAS , plc simens S7-300  ... más información

Máquina: MATRA 1t 液压开式台式压力机
Número de artículo: 165055008
usado
Precio: 800 €

Hydraulic Fine Press, MATRA, , up to 1000kg, Table: 260x200mm, Radius 110, Foot or hand release, without UVV Fully functional, can be visited under power  ... más información

prensas / 偏心压力机
Máquina: ERFURT PME 315 T, progressive 偏心压力机
Número de artículo: 163239209
Año de construcción: 2020
usado

Press type: PME 315 T Drive system: Eccentric Type of used tools Progressive Nominal force: 3150 kN Rating above BDC mm Material flow L->R - Maximum SPM: 75 1/min Minimum SPM: 20 1/min Maximum shut height: 525 mm Minimal shut heigh:t 325 mm Slide adjustment: 130 mm Maximum slide stroke: 210 mm Minimum slide stroke: 40 mm Bolster specification Bolster dimension: 2220 x 1225 mm T-slots in bolster: T28 H8 DIN650 - Draw cushion N/A - Draw cushion stroke: N/A mm Draw cushion force: N/A kN Draw cushon dimension: N/A mm Maximum weight: kg Ram specification Ram dimension: 2220 x 1225 mm T-slots in ram: T28 H8 DIN650 - Max. upper die weight: 3600 kg Tool manipulation Tool is manipulated by forklift - Max. tool weight: 5500 kg Forks size/pitch: 150x60/940 mm Lower die clamp height: 50 mm Upper die clamp height: 50 mm Tool locating (centering) stůl/bolster  ...

Máquina:  200t 卧式折弯机(推土机)
Número de artículo: 165055001
usado

Horizontal Hydr. Straightening and bending press, 200 tons, hand and foot control, hydraulics. 18kw, with dies.  ... más información

Máquina: RASTER ZEUENRODA GHP 400 H/K-08 液压合模机和试模机
Número de artículo: 165054994
usado

Hydraulic tool sampling press and small batch press, Nominal force : 400to, Stroke: 600mm , Table surface/ ram surface: 2500 x 1500mm 4200 operating hours, weight: 32to. To be visited under power.  ... más información

prensas / 单柱压力机
Máquina: JESSINEGG + URBAN Stroke 300 单柱压力机
Número de artículo: 165047953
usado
Precio: 2.000 €

Lift: 300, table 450x370, 1300kg  ... más información

prensas / 弯曲压力机
Máquina: TRUMPF TrumaBend V170 弯曲压力机
Número de artículo: 165047930
Año de construcción: 1998
usado

Trumpf Press Brake Trumabend V170, 1700KN, Stroke: 365,. L-530cm, W- 240cm, H-300cm, Weight: 18to,  ... más información

prensas / 冲床 冲压机
Máquina: ERFURT PASU 100 冲床 冲压机
Número de artículo: 158599434
usado

Capacity 100 ton Table 880x715 mm Max. sheet thickness 3 mm Stroke per min. 360 Stroke 25 mm Ram adjustment 70 mm Distance Ram-table 400 mm 15 kW Dimensions LxWxH 3300x1600x2600 mm Total weight 10 tons  ... más información

Máquina: HAULICK HPV 75 H形结构偏心压力机
Número de artículo: 163490082
usado

HAULICK HPV 75 Eccentric Press Maximum pressing force 75 t Bottom working table 640x540 mm Maximum number of strokes per minute (manual work) 50 spm Maximum number of strokes per minute (automatic work) 270 spm Min. length of the slider stroke 7 mm Max. length of the slider stroke 78 mm Certified by SCHULER 04.08.2012

prensas / 偏心压力机
Máquina: WEINGARTEN ER 100 偏心压力机
Número de artículo: 163490083
usado

WEINGARTEN ER 100 Eccentric press Capacity 100 t Table 710 x 570 mm Sheet thickness 12 mm Number of strokes 55 spm Ram stroke 8-112 Ram adjustment 80 mm  ... más información

prensas / 曲柄压力机
Máquina: ERFURT PKZZ 250 曲柄压力机
Número de artículo: 157576794
usado

PKZZ 250 Double Column Crank stamping Press Completely overhauled. Electric and Control- Not available. Table 2500 x 1400 mm Ram 2320 x 1250 mm Distance between uprights 2525 mm Window in table width 2300 mm Window in table depth 850 mm Stroke 400 mm Strokes per minute SPM 12 Adjustment of ram 120 mm Shutheight 550 mm Table cushion force 50 to Cushion stroke 160 mm Motor 32 kW Weight ca. 39 tons

prensas / 偏心压力机
Máquina: SCHULER PE25/250 偏心压力机
Número de artículo: 164437190
usado

SCHULER PE25/250 Eccentric press Available 5 presses Force 25 tons Projection 240 mm Ram Stroke 8-60 mm Table 500 x 450 mm Stroke adjustment 6-60 mm Plunger adjustment 125 mm Strokes 125 spm Plunger holder Ø 40 mm Dimensions 1260/940/H1940 mm Weight 1446 kg Certified by SCHULER on 04.08.2012

Máquina: MIOTAL WHP 160 H型结构液压机
Número de artículo: 161243518
nuevo

Specifications: Capacity: 160 t Passage between stand: 1100 mm Working area, max.: 1100 x 350 mm Piston stroke: 400 mm Flow speed: 6.2 mm/s Return speed: 6.8 mm/s Motor power: 5.5 kW Width: 1640 mm Depth: 1000 mm Height: 2550 mm Weight, approx.: 1300 kg Equipment: - Laterally movable cylinder via rack, pinion and handwheel - Spacious work area - Height-adjustable table - Torsion-resistant design with welded steel -Manometer - Fine adjustment of pressure - Additional hand pump

Máquina: MIOTAL WHP 100 H型结构液压机
Número de artículo: 161243517
nuevo

Specifications: Capacity: 100 t Passage between stand: 1010 mm Working area, max.: 1010 x 300 mm Piston stroke: 400 mm Flow speed: 7.12 mm/s Return speed: 13.42 mm/s Motor power: 4 kW Width: 1600 mm Depth: 850 mm Height: 2450 mm Weight, approx.: 1000 kg Equipment: - Laterally movable cylinder - Spacious work area - Height-adjustable table - Torsion-resistant design with welded steel -Manometer - Fine adjustment of pressure - Additional hand pump

Máquina: MIOTAL WHP 60 H型结构液压机
Número de artículo: 161243516
nuevo

Specifications: Capacity: 60 t Passage between stand: 820 mm Working area, max.: 820 x 300 mm Piston stroke: 400 mm Flow speed: 6.1 mm/s Return speed: 10 mm/s Motor power: 3 kW Width: 1460 mm Depth: 850 mm Height: 2400 mm Weight, approx.: 700 kg Equipment: - Laterally movable cylinder - Spacious work area - Height-adjustable table - Torsion-resistant design made of welded steel -Manometer - Fine adjustment of pressure - Additional hand pump

prensas
Máquina: HYUNJIN INDUSTRY 2500 T 热锻压机
Número de artículo: 151446161
Año de construcción: 2008
usado

Qty. 1 Second-hand crank hot forging press – dismantled & in storage Mfc.: Hyunjin Industry, Korea Built: 2008 Status: dismantled and in storage Force: 2500 T Total weight of the machinery: approx. 250 T  ... más información

prensas
Máquina: FARREL 1600 T - HYDR. - DIRECT 挤压机
Número de artículo: 159550878
Año de construcción: 1977
usado

Qty. 1 Second-hand extrusion press Mfc.: FARREL Built: 1977 Type: hydraulic direct Force: 1600 Ton Billet dia.: 178 mm Billet length: 680 mm Container dia.: 185 mm Container length: 698 mm Operation pressure: 220 bar Fixed dummy block