- Aparelhos de soldar (42)
- Aparelhos para soldar cavilhas (1)
- Aspiração de fumos de soldagem (14)
- Células de soldadura de robôs (11)
- Chanfrador (5)
- Dispositivos motorizados para rodagem de recipientes (8)
- Elementos térmicos (1)
- Equipamento de corte laser (17)
- Equipamento para soldagem a laser (7)
- Equipamentos de corte de tubo (1)
- Equipamentos de soldagem de gás inerte (6)
- Equipamentos móveis de filtragem de fumos de soldadura (1)
- Gás de hidrogénio-azoto (1)
- Maçaricos (1)
- Máquinas automáticas redondos de soldar (1)
- Máquinas de chanfrar para bordas de soldagem (3)
- Máquinas de corte por ultrasons (1)
- Máquinas de soldadura de resistência (1)
- Máquinas de soldadura de tubos (2)
- Máquinas de soldadura por ponto (60)
- Máquinas de soldar (159)
- Máquinas de soldar com arco eléctrico (1)
- Máquinas de soldar de rede metálica (6)
- Máquinas de soldar elétrica (6)
- Máquinas de soldar especiais (3)
- Máquinas de soldar ponta a ponta por acção de faíscas (8)
- Máquinas de soldar por fricção (4)
- Máquinas de soldar por laser (1)
- Máquinas de soldar por roletes (1)
- Máquinas de soldar por roletes compridos (1)
- Máquinas de soldar por ultras sons (1)
- Máquinas de soldar topo a topo (10)
- Máquinas para soldagem a laser (7)
- Máquinas para soldar cavilhas (4)
- Máquinas para soldar por projecção (3)
- Mesas de soldar (59)
- Mesas giratórias basculantes de soldagem (15)
- MIG MAG Aparelhos de soldar de gás protector (207)
- Portadores de máquinas de soldagem (3)
- Pratos giratórios de soldagem (37)
- Recipiente de suporte giratório (4)
- Robots para soldar (23)
- Sistemas de robôs de soldadura (2)
- Transformadores (2)
- Tratores ímã para soldagem (1)
- Unidades de corte por plasma (32)
- Unidades de soldadura (12)
- Unidades de soldadura por eléctrodos (24)
- Unidades de soldadura por plasma (1)
- mais
- AARDING (2)
- ABB (10)
- ABICOR BINZEL (1)
- ABITIG (2)
- AC KUBOTA (1)
- ADK (1)
- Air Liquide (2)
- AIRATOR (1)
- AK BEND (1)
- AK-BEND (4)
- AKYAPAK (1)
- AL-KO (1)
- ALFA (1)
- ALFRED KOHLER (1)
- ALLOY (1)
- ALME GERIMA (2)
- ALPHA LASER (2)
- Alphaforce (2)
- Alphaweld (2)
- ALU (1)
- AMADA (1)
- APS (2)
- Arcair (2)
- ARCOGEN (1)
- Arcos (3)
- ARDON (1)
- ARNHOLD (1)
- ARO (141)
- ART WELDING (1)
- ART-WOS (1)
- Artec (3)
- ARTEC THREEWELD (1)
- ASTOR (1)
- ATF (1)
- AUER (1)
- AUTOMA (1)
- Avesta (8)
- AWDS TECHNOLOGIES (1)
- AWS (1)
- BAC CAINSDORF (1)
- BACH (1)
- BDS Maschinen (2)
- BECK (1)
- BENDMAK (1)
- BEWO (1)
- Bihler (2)
- Binzel (10)
- BLM ADIGE (1)
- BODE (1)
- BOeHLER (3)
- BOHLER (1)
- BOLDRINI (1)
- BOSCH (1)
- BROWN BOVERI (1)
- Bystronic (15)
- Böhler (34)
- Böhler Thyssen (3)
- Castolin (4)
- CASTOLIN - EUTECTIC (1)
- Castolin Eutectic (7)
- CEA (4)
- CEBON (19)
- CEBORA (13)
- CENTROMAT (1)
- CERDI (1)
- CEVISA (1)
- CIA MATHEY (1)
- CIFES (1)
- CLOOS (16)
- COMMERCY SOUDURE (1)
- Concept (5)
- CONTI-WELD (3)
- Copper (4)
- CORAL (1)
- CR ELECTRONIC (1)
- D+L TECHNIK (1)
- Daewoo (63)
- DALEX (48)
- DAPENG (1)
- DELFORGE (1)
- DELTAMIG (1)
- DELTATHERM (1)
- DENIOS (1)
- DEUMA (5)
- DEUMA-HEITZE (1)
- Dinse (23)
- DOMINO (1)
- DRA TEC (2)
- DRATEC (3)
- DREHTISCH (1)
- DRESS WERKZEUGE (1)
- DRäGER (1)
- DUMETA (58)
- DYNAMIC POWER LASER (1)
- DÜRING (1)
- E-TECH TRUMPF (1)
- ECO CRANES (1)
- EDECO (1)
- EG (1)
- ELECTREX (1)
- ... mais
subcategorias
(terceiro nível de categoria)
Fabricante:
(Categoria: 108)
usava
Ano de construção: 1998
usava
Volume flow: 13,600m³/h, pressure increase: 3100Pa, rotational speed: 1500/min, motor power: 18.5kW, weight: 790kg, with Chip Container STBB HAB S, including full documentation. ... mais informação
Ano de construção: 2002
usava
There are two Trumpf TRUMATIC HSL 2502 available, laser power: 2x 1200W, nitrogen/ oxygen supply: 30/ 10bar, connected load: 168kVA, weight: 10t, year of construction machine 1/2: 2001/2002, with Laser TRUMPF HAAS-LASER HL 1203 D. ... mais informação
Ano de construção: 2014
usava
Including accessories, cutting head, welding head 150mm, setting master for cutting head and welding head, communication interface external periphery, automatic front door with servo motor, support frame, the right side door has an opening for pipe processing, this must be closed with a sheet of metal on both sides, battery from the PC must be replaced, the software must be reset for normal operation, with Laser Trumpf TruDisk 3302, laser power: 3300W, connected load: 20kVA, weight: 850kg and Cooling Device KLH RL 16/0 SK IEC.
Ano de construção: 2000
usava
Arm length: 550mm, max. welding power: 136kVA, length: 640mm, width: 930mm, height: 1550mm, weight: 290kg. ... mais informação
usava
Max. electrode force: 260kp, nominal output: 150kVA, connected load: 620kVA, weight: 1.1t. ... mais informação
usava
Max. electrode force: 5600N, nominal output: 130kVA, connected load: 324kVA, weight: 630kg. ... mais informação
Ano de construção: 2007
usava
With Welding Robot Fanuc ARC Mate 120iBE and Controls Fanuc SYSTEM R-J3iB Mate, including documentation. ... mais informação
Ano de construção: 2008
usava
X-travel: 2520mm, y-travel: 1550mm, z-travel: 300mm, max. sheet thickness: 12mm, max. workpiece weight: 330kg, cutting speed: 0-20m/min, controls: AMNC-F, connected load: 70kVA, weight: 7.5t, operating hours: 23,600h, with Resonator Fanuc AF 2000 E (LU 2.5), laser power: 2500W, laser wavelength: 10.6μm, with adaptive optics (Active Cut), sensor cutting head HS-2003, high-pressure cutting device (Clean Cut), aluminium cutting device (Alu Cut), focus point adjustment, gas pressure adjustment, resetting device, parts flap, extraction system, cooling unit, beam path rinsing and diode laser for positioning.
Ano de construção: 2012
usava
The plant was set up once in 2012 and then dismantled and put into storage, includes Anti-Drift Device Oerlikon ADVi 40x45 So and Section Assembly Line Oerlikon RB-AFV/FV 7500 So, with documentation, no videos available, can be inspected on site in stored condition. ... mais informação
Ano de construção: 2007
usava
Sheet thickness: 1.25-15mm, laser power: 3500W, operating hours: 54,839h, with laser source ROFIN DC 035, without extraction unit and without software, if a nesting software is available it can be integrated, can also be from another manufacturer. ... mais informação
Ano de construção: 2004
usava
Max. power: 2.4kW, last maintained in 2016. ... mais informação
Ano de construção: 2005
usava
Table dimensions: 2000x4000mm, max. stainless steel/ steel thickness: 20/ 25mmm, fuel: oxygen, propane, controls: CNC-801, with documentation and plasma power source Powermax 1650, the extraction needs overhauling. ... mais informação
Ano de construção: 2011
usava
Max. workpiece dimensions: 1500x300mm, laser power: 3kW, max. load: 5t, operational hours counter: 5364h, with loading table, suction units for removing the sheets from the loading trolley, configuration ADL30-PMC30-TLE30 155C L5-30ASF, unloading trolley, enclosure, pallet storage rack, workbench, storage table, chip trolley and documentation, an inspection is possible, was maintained regularly.
Ano de construção: 1990
usava
With MIG/MAG Welding System Messer Griesheim LG1200, including accessories, documentation and tests according to accident prevention regulations (UVV), an on-site inspection is possible. ... mais informação
Ano de construção: 2007
usava
Max. Laser power: 400W, operating hours: 28. 200h, with WinLas laser programming software, storage option for 99 laser programmes Optical setup for one laser light cable with fast switch (50ms switching time), optical setup can be extended to a maximum of 4 laser light cables, pilot laser with plasma sensor holder, Control of the pilot laser via laser operating software, beam guidance and shaping, LLK-B 06 laser light cable, length 40m, fibre diameter 600mm, suitable for robots, BEO 7000210p processing optics for laser welding, lens with focal length 200mm, Protective glass cassette for easy replacement of the protective glass, collimation 0° with defocussing and observation by camera, CCD camera, b/w monitor, adjustable crosshairs, camera supply cable, 30m long, and BNC video cable, 10m long, optics protection by Laval Crossjet, Design of the robot cell with suspended robot, KUKA KR 30 ...
usava
Max. Plate dimensions: 2400x2100mm, table dimensions: 4100x3600x1450mm, water jet nozzles: 0.12/0.15/0.17/0.20/0.25mm, with documentation, 3D cutting head, drives, software, tools, spare parts package, and high pressure pump UHDE HPS 4022, multifunctional CAM cutting system with high precision, without abrasives, 3D 5-axis cutting head for flat cutting of different materials up to 45° bevel, with cutting nozzle make Allfi III/V, electrical height adjustment of the nozzle up to 200mm, for different material heights, dynamic servo drives for 90m/min, acceleration up to 70 m/s², machine frame in truss construction made of aluminum, cutting bridge, stainless steel water collection tray with water drain, stainless steel honeycomb elements as cutting table support, PC-based NC control Expert-PC and TFT monitor, cutting table, housing and hold-down device, on-site inspection is possible.
Ano de construção: 2010
usava
Max. sheet dimensions: 6050x2550mm, max. cutting speed: 10m/min, length: 8125mm, width: 3800mm, height: 1900mm, with documentation, an on-site inspection is possible. ... mais informação
Ano de construção: 2010
usava
Cutting area: 3000x1500mm, laser power: 2kW, operating/ cutting hours: 30,153/ 7594h, with automation ByTrans Extended 3015, second cassette, storage tower Bystronic ByTower, number of compartments: 11, on-site inspection is possible. ... mais informação
Ano de construção: 2011
usava
X-travel: 800mm, y-travel: 500mm, z-travel: 400mm, working height: 980mm, turntable diameter: 900mm, connected load: 12.5kW, control: Siemens Sinumerik 840D, length: 2710mm, width: 1815mm, height: 2645mm, weight: 1.86t, weight control cabinet: 300kg, with documentation, an on-site inspection is possible.