otras máquinas para el procesado de metales usadas para la venta

Inlet pressure min./max.: 6bar/10bar, recommended inlet pressure: 7bar, max. compressed air water vapor content: 1.3g/³, max. compressed air oil content: 0.1mg/kg. Max. Compressed air consumption with collection container/fluidized powder trolley: 12m³/h / 47m³/h, manual coating opening X/Y: 1300mm/1300mm, number of filter elements: 3, filter area: 29.25m². Exhaust air volume initial/working area: 3200m³/h / approx. 2650m³/h, powder capacity with collection container/fluidized powder trolley: 80l/30l, dimensions X/Y/Z: 1500mm/2758mm/2100mm. Documentation available.

An angular system for Weinig window and door production is available. Max. tool outside diameter: 320mm, max. tool flight circle: 232mm, slotted spindle length: 640mm, profiling and synchronized spindle length: 285mm-320mm, control: Siemens WS400. Including complete tooling and style window. Documentation available.

A profile hardening system (inductor) AEG-Elotherm Elomat V/N/180/3 is available. The nominal output is 200kW. The system is fully functional and is offered including various coils. ... más información

A Gustav Wolf belt drop hammer is available. ... más información

A furnace system consisting of an (1) Ipsen pusher-type furnace with shaking trough, a (2) WMV Apparatebau cleaning system and a (3) Kohnle tempering furnace is available. 1) Year of construction: 1986, working temperature range: 850°C-890°C, heating: electric, quenching: oil including oil cooling (via air), defects: Furnace lining and muffle. 2) Year of construction: 2011, drum diameter: 500mm, processes: spinning/washing/rinsing/drying, including transfer unit. 3) Year of construction: 1986, working temperature range: 400°C-500°C, heating: electric. Including large package of spare parts, especially for the Ipsen oven.

Work container dimensions X/Y/Z: 1050mm/765mm/560mm, size: 700mm/480mm, max. workpiece dimensions X/Y/Z: 900mm/680mm/250mm, max. workpiece weight: 400kg. Wire feed pressure: 6bar-9bar, min. flow rate: 100l/min, hose outer diameter: 8mm. Travel X/Y/Z/U/V: 350mm/250mm/250mm/90mm/90mm, max. taper angle at 80mm height: +/- 25°, min. resolution X/Y/Z/U/V: 0.1μm/0.1μm/0.125μm/0.125μm/0.125μm/0.125μm. Dielectric unit: Type: deionized water, clean tank capacity: 200l, dirty tank capacity: 600l, filter cartridge precision: 50μm. Standard wire guide diameter: 0.15mm/0.20mm/0.25mm/0.30mm, max. wire weight: 8kg, max. wire tension: 30N, max. wire speed: 330mm/s. Documentation available.

Cleaning capacity at 5bar: 400l/min, basket load: 1000kg, basket speed: 10rpm, lye volume: 420l, usable basket diameter: 1650mm, usable internal height: 650mm. Dimensions X/Y/Z: 2200mm/2700mm/1300mm, weight: approx. 1700kg. ... más información

Travel X/Y/Z: 350mm/250mm/350mm, tank dimensions X/Y/Z: 670mm/600mm/250mm, table dimensions X/Y: 800mm/600mm, max. workpiece dimensions X/Y/Z: 1070mm/735mm/450mm, max. workpiece electrode weight: approx. 400kg/100kg, speed: 820mm/min. Dimensions X/Y/Z: approx. 2000mm/2500mm/3000mm, weight: approx. 3000kg, control: Agiematic T. Documentation available.

Various SK50 tool holders are available. Diameter range: 25mm-100mm, manufacturer: Vario/Master/Capto/Albrecht/Weldon/mandrel/milling mandrel/ABS. A total of over 450 tool holders are available. On-site inspection is possible. ... más información

FEEDSTOCK TUBE  external diameter min.: 10 mm  external diameter max.: 105 mm  wall thickness min.: 0.8 mm  length min.: 20 mmPRESS FORCES  total force (nominal): 200 to ... más información

Precision air chuck Ø240mm (Type 9-500-6QC)Technology: APCRepeatability approx. 0.0015Jaw stroke 12mmconcentricity: approx. 0.005 mmbase jaw DRM 134-182mm- as new unused air chuckEquipment:- Jaw Ø 174 - 182mmUse of a high-precision pneumatic pull-down chuck with special jaws and workpiece stop. To ensure accuracy during jaw change and to realize the required set-up times, the chuck is equipped with the QC precision jaw change system. Replaceable module pins in the hardened special jaws take over the task of secure tooth flank contact.

CONTROLS  PLC SIEMENS S7 300 SURFACE TREATMENT, USABLE PROCESS SPACE / ZONE  length: 9000 mm  width: 350 mmELECTRICAL SPECIFICATIONS  total power consumption: 278 kW  mains power supply: 450 kVA  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  space requirements -left/right-: 10300 mm  space requirements -front/back-: 2500 mm  total height: 2650 mm  total weight approx.: 9000 kg3-lane system with 350 mm usable width eachProcess sequence:Stage 1:         Cleaning (70 degrees)Stage 2,3,4,5:   Rinsing (65, 60, 60, 55 degrees)Stage 6:         Hot air drying (65 degrees)Oil separator:   continuous oil discharge Heating:         e ...

CONTROLS  PLC SIEMENS S7 300 SURFACE TREATMENT, USABLE PROCESS SPACE / ZONE  length: 7000 mm  width: 1040 mmELECTRICAL SPECIFICATIONS  total power consumption: 145 kW  mains power supply: 267 kVA  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  space requirements -left/right-: 7400 mm  space requirements -front/back-: 2350 mm  total height: 2300 mm  total weight approx.: 8000 kgContinuous conveyor belt 1040 mm wide, separated into 3 linesProcess:Stage 1:       Cleaning (65 degrees)Stage 2,3,4:   Rinsing (65, 60, 60 degrees)Stage 5:       Heating air drying (60 degrees)Oil separator: continuous oil discharge Heating:       electrical heating Conveyor belt: 1x wire  ...

CHARACTERISTICS HEAT TREATMENT EQUIPMENT  heating method: gas   temperature min.: 420 °C  temperature max.: 930 °C  throughput, capacity: 10000 kg/hThroughput per hour+ 420-680 degrees Celsius: 10'000kg+ 830-930 degrees Celsius:  7'150kg

FEEDSTOCK TUBE  external diameter min.: 20 mm  external diameter max.: 170 mmMACHINE CHARACTERISTICS SWAGING  force: 1000 kN  stroke rate (max.): 560 /minPRODUCT (PROFILE, TUBE)  length min.: 4000 mm  lenght max.: 12000 mmcomplete line including hammer and tube handlingmin. end diameter: 12 mmmax. end diameter: 110 mmlength of the conical tool part: 190 mm (for hammering)work feed speed: 0-100 mm/secrapid speed: 200 mm/secproduction output: approx. 260 pcs/h (application dependent)

FEEDSTOCK TUBE  external diameter min.: 10 mm  external diameter max.: 105.5 mm  wall thickness min.: 0.8 mmPRESS FORCES  total force (nominal): 300 to ... más información

CONTROLS  PLC SIEMENS FEEDSTOCK TUBE  external diameter min.: 20 mm  external diameter max.: 35 mm  length min.: 70 mm  lenght max.: 250 mmThe system is designed for hardening, drying and oiling cam tubes.The bunkers are loaded and unloaded manually. The system automatically removes the cam tubes from the loading bunker and places them automatically in the unloading bunker. The cycle time depends on various parameters, such as workpiece length, workpiece diameter, number of hardening zones, lengths of the hardening zones and the hardening depth.The complete system consists of:1 x base frame with collecting tray for the quenching medium 1 x lifting beam for simultaneous infeed and outfeed of the cam tubes 1 x horizontal slide with servo geared motor for holding the HF oscillating circuit transformer for 4-fold inductor and 2x 4-fold shower ...

CHARACTERISTICS HEAT TREATMENT EQUIPMENT  heating method: electric   temperature min.: 420 °C  temperature max.: 930 °C  throughput, capacity: 6000 kg/hThroughput per Hour+ 420-680 degrees Celsius: 6000kg+ 830-930 degrees Celsius: 3200kg- Red tube storage racks next to the furnace not included

CONTROLS  PLC SIEMENS S5 FEEDSTOCK TUBE  external diameter min.: 20 mm  external diameter max.: 38 mm  wall thickness min.: 2 mm  wall thickness max.: 4 mm  length min.: 52 mm  lenght max.: 200 mmSystem consists of:+ BÜHLMANN (system construction), YoM 1997+ BACHMANN ABB robot cell, YoM 2014+ BROTHER TC-S2DN-0 CNC machining center, YoM 2012

CONTROLS  PLC SIEMENS S7 FEEDSTOCK TUBE  external diameter min.: 40 mm  external diameter max.: 150 mm  length min.: 260 mm  lenght max.: 1500 mmELECTRICAL SPECIFICATIONS  total power consumption: 155 kW  mains power supply: 280 kVA  mains voltage: 400 V  mains frequency: 50 HzSystem consists of:+ FELSS AYIMUS H02-4NC precision axial forming machine, year 2007+ SONTEC PR 2290 shaft testing machine, year 2007+ BACHMANN BFH 4400 automatic palletizer, year 2007Exclusions from supply (even if visible on photos)- without chip breaker- without laser marking system