- A+B (3)
- A.R.elle (2)
- ABB (2)
- ABEG (1)
- ABEX DENISON (1)
- ABUS (2)
- ACCU-SORT SYSTEMS (1)
- ACE (1)
- ACKRUTAT (1)
- AEG (4)
- AERZENER / SEEGER (1)
- AGRIA (1)
- Airtec (14)
- Airtec Pneumatic (6)
- AKO (1)
- Alco (2)
- Alco Emerson (3)
- ALFA LAVAL (1)
- ALKENBRECHER (1)
- ALKO-THERM (1)
- ALLWEILER (3)
- ALWAYS (1)
- AMADA (1)
- AMBAFLEX (1)
- AMG-PESCH (1)
- Ammeraal Beltech (3)
- ANSALDO (1)
- ARETBW (1)
- ARI (18)
- ARI FOXBORO (1)
- ARO (1)
- ARTIKELTRANSPORT FüR WEICHPCKUNGEN (1)
- Asco (3)
- ASS (1)
- ATEX (1)
- ATLANTIC (1)
- ATLAS (1)
- Atlas Copco (5)
- atos (3)
- AUMA (1)
- AVANTECH (1)
- Aviteq (2)
- AW WOLFF (1)
- AXA (1)
- Axmann (3)
- BA.M.E (1)
- BABCOCK (1)
- BACHOFEN (1)
- Bahco (15)
- BAKA (1)
- BALKANCAR (1)
- Bansbach (5)
- bar (3)
- BARTH (1)
- BATTENFELD (1)
- BAUER (1)
- Bauknecht (2)
- BBC (1)
- BDL (2)
- Becker (8)
- BEDO (1)
- Behringer (2)
- BEKO (1)
- BEKOMAT (1)
- Belimo (3)
- BELL + HOWELL (1)
- BERARMA SANTENBERG (1)
- BESTA (1)
- BGS (1)
- BIG (1)
- BIRKENBEUL (1)
- Bizerba (2)
- BJM (2)
- BJM REXROTH (1)
- BLB (1)
- BLIND (1)
- BLIS (1)
- BLUME FöRDERTECHNIK (1)
- BMW (1)
- BOA (1)
- BOBARD (1)
- BOHLE (1)
- BOSCH (144)
- Bosch Rexroth (2)
- BOSCH REXROTH ULDRIAN (1)
- BOSCH REXROTH/SIEMENS (1)
- BOSCH ULDRIAN (1)
- BRAMA GMBH (1)
- BRAUN (1)
- Bravo (2)
- BRINKMANN (1)
- BRUENINGHAUS (1)
- BRUNSEN (1)
- BSA (1)
- BTW BINDER (1)
- BUCHER HACO (1)
- BUCHHOLZ (1)
- BUDDE (1)
- BUGATTI (1)
- BULLCRAFT (1)
- ... más
Fabricante:
(Categoría: 1402)
Año de construcción: 2018
usado
Scratch chain conveyor MATEC For wood chip extraction -Trogwidth 300 mm -Troghheight 450 mm -Troglänge about 5500 mm -Steel sheet 4 mm -Creation below once about 65 ° -Discard height from ground about 4500 mm -single-stranded chain guide links A-A 80 mm -Conveyor slats plastic height about 130 mm -Drive snail gearbox engine electric 1.5 kW, 3x400 V, 50 Hz Weight about 1100 kg Built in 2018, new The machine is in very good condition, operational. Changes, errors, intermediate sales reserved! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
Año de construcción: 1978
usado
Roller conveyor for frame saw to cross off promotion L x W x H: 150 x 230 x 100 cm Weight approx. 6000 kg Built in 1978 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/Ersatzteile durch MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Maschinenbau Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
Año de construcción: 1978
usado
Cross off feed for roller conveyor L x W x H: 400 x 230 x 80 cm Weight 4000 kg Built in 1978 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
Año de construcción: 1978
usado
Cross conveyor for removal of boards L x W x H: 5 x 4 x 1 m Weight 3000 kg Built in 1978 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
usado
MATEC forklift blades are robust and easy to build and can be attached to almost any commercial lyklift. With a fuse bolt, the tilting device can be blocked for special inserts. The front shutter flap can be mounted on any shovel. The interchangeable scraper is suitable for planing work such as removing ice, repelling soil, gravel or feed, etc. - Bucket width 1950 mm - Bucket depth type 1: 1000 mm, shovel depth type 2: 1330 mm - Bucket height without attachment 450 mm - Weight approx. 220 kg - Payload 2000 kg - Steel sheet 4 mm industrial lypainted - Fork shoes axle distance 800 mm - Fork tine width max. 170 mm - Fork thickness max. 60 mm - 4 lifting eyelets for krange slopes - Tilting device for cable pull with lifter and spring reset, securing bolt Options at extra cost: - Type 2 shovel depth 1330 mm Total price € 1590.00 - Front shutter € 590.00 - hydr. Liftin ...
usado
Chain cup movement in modular design, i.e. horizontal and vertical conveying path are variable (last selected installation: 6.0 m horizontally below > 3.0 m vertical > 18.2 m horizontally above). Incl. plastic pendulum cups, box vent 410 mm x 410 mm in different lengths, drive station with geared motor 1.1 kW / 56 UPM, conveyor chains, 2 pcs. deflection stations, clamping stations, return locks and 3 pcs. outlet stations. Conveyor speed: 0.25 m/s.
usado
Transmitting vessel with 2,000 l. gross content, inlet with pneumatic cone closure (incl. 1 spare cone), venting and outlet via pneumatic squeezing valves. Conveyor lines on the side of the building. ... más información
usado
Chain elevator in modular design, horizontal and vertical conveying distance are variable (last used setup: 6,0 m horizontally at bottom > 3,0 m vertically > 18,0 m horizontally at the top), Incl. plastic pendulum buckets, steel ducts 410 mm x 410 mm in different langths, drive station with gear drive 1,1 kW / 56 RPM, conveyor chains, 2 pcs. drive- directing-stations, tensioning-station, return stop mechanism and 3 pcs. discharging stations. Conveying speed: 0,25 m/s.
usado
Pneumatic conveyor vessel with 2.000 l. gross capacity, pneumatically operated inlet cone (incl. one spare cone), pinching valves for vent and outlet. Without pipework. ... más información
usado
Box feeder with steel scale strap and combined drive for belt and reel over pre-bed. Box dimensions: Approx. 2,000 mm x 750 mm x 500 mm high; incl. hopper (on box) with the following inlet dimensions: 1,600 mm x 1,200 mm x 360 mm high. Condition: Good substance; Motor must be overhauled, tape partially made viable.
usado
Chain hoist with motorized chassis for steel beams, load capacity: 1,000 kg, lifting speeds: 5.4 m/min. (fast); 1.4 m/min. (slow), incl. hallway operation, without steel beams. Brakes and drives workshop overhauled / tested. ... más información
usado
Material conveying stations for powdered materials, on movable base, with material dropler in V2A (dimensions 700 mm x 700 mm, incl. protective grille inside), blow-through cell wheel lock in V2A (200 mm , 0.55 kW drive) Fabr. Seeger, AerzenER GMA rotary piston blower incl. drive, air filter, compensating vessel and control cabinet.
Año de construcción: 1991
usado
Electric chain hoist with travel motor for steel beams, hoisting capacity: 1.000 kg, hoisting speeds: 5,4 m/min. (fast); 1,4 m/min. (slow), incl. Pedestrian control, without steel beam. Brake and drives revised / function checked. ... más información
usado
Rubberized, encapsulated vibrating channel with 2 outlets and 3 inlets of 200 mm , with 2 unbalance rs of 1.8 kW / 960 UPM. Rinne was used to press up 2 side-by-side Mogensen-Sizern. ... más información
usado
Rubber lined, ensulated vibrating chute with 2 outlets and 3 inlets (200 mm Ø each), with 2 imbalance drives (1,8 kW / 960 RPM each). Chute has been used for feeding material in two side by side standing Mogensen sizers. ... más información
usado
Type: 9.3-456, Y.O.M.: 1991, inlet: 400 mm x 400 mm, overhauled, without motor. ... más información
usado
Tank standing, Y.O.M.: 1985, D = 900 mm, 1.4 m high, three load cells, max. pressure: 6 bar, weight: approx. 500 kg ... más información
usado
Inlet: 380 mm x 480 mm, wheel with upstream slide valve, driven by cylindrical gear drive with 3 kW / 42 RPM, only few funning hours. ... más información
usado
Pneumatic conveyor (working pressure: 1 bar) with 600 l capacity in mild steel. With inbuilt bin-type scale BW3 (250 kg/batch), slide, swivel slider, rotary-vane feeder DK 4/200, weighing cell and ventilation., Without electrical switchgear cabinet. ... más información
usado
Y.O.M. 1985, Pneumatic pressure conveying vessel for operating pressure 1 bar with 600 l usable capacity in normal steel., With built-in container scale BW3 for 250 kg/batch, shake, swivel valve, rotary valve DK 4 /200, load cell and ventilation. Without control cabinet. ... más información