Fabricante:
(Categoria: 206)
I sell several machines, equipment here. spare parts, etc. for woodworking, Forklifts, work platforms as well as accessories and spare parts for forklifts and work platforms. Therefore, be sure to check out my other auctions Briquette press briquetting press chip press Pressing unit without control WEIMA TYPE: TH50 Briquette diameter approx. 50 mm Motor power hydraulics 5.5 KW They only bid on the briquette unit incl. hydraulic power unit. there is no control. I still have a control for briquette press with LOGO module. This can be purchased at an additional cost. The power unit could not be tested. Will be sold as it says here. ( See pictures ACTUAL - condition) Prior viewing is expressly desired, just leave phone no. by mail, then I will get back to you for a viewing appointment. Subject to prior sale, all information is subject to change. The ma ...
Briceder press RSN SP 250 P Don't. # 02 782 Without a control cabinet/control Without hosting 700 l cooling water tank available for hydraulick units L x B x H: 120 x 80 x 120 cm Built in 1992 Weight about 750 kg Dismantling by buyers The machine is in good condition, operational. Changes, errors, intermediate sales reserved! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
Edge press of PanHans 923 with preheating ruler Working length 250 cm maximum 80 mm thick L x W x H: 300 x 60 x 100 cm Weight approx. 300 kg Built in 1976 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
SPECIFICATIONS: Electric hot operation Work table size mm: 2500 x 1300 with intermediate plate 4 pistons, diameter mm: 90 Vertical stroke mm: 450 ... mais informação
Hydraulic frame press Hungerbühler Press-Measurement: 4100 x 3050mm 3 vertical cylinders 3 horizontal cylinders Height adjustment via control box Width adjustment via control box Supports at the bottom for gluing wings at working height. The machine is in good condition, ready for operation. Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax: 0041 62 966 21 12
Glue stand hydraulic, double-sided Format L x W: 3000 x 2000 mm L x W x H: 3200 x 2200 x 1100 mm Weight approx. 600 kg Built in 2003 Pressure per cylinder 2500 kg 8 clamping elements 2 Holders The machine is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
Frame press Hess economic hydraulic 3600 x 2250 mm L x W x H: 400 x 100 x 270 cm Weight approx. 1100 kg year 1987 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
Glue press Etienne Format L x B: 3800 x 2700 mm Window frame press pneumatic Weight approx. 890 kg Year of construction 1980 The press is in good condition, ready to use. Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
Good Used Glulam Beams Press BUILD YEAR 2010 Hydraulic Preeslaenge 12 m Press height 1.3 m Machine like new ... mais informação
I sell a press for adhesive wood gluing LISY DVORAK TH6, built in 2008. Material size 2600 X 1050 x 50mm 6 work surfaces, manual rotazion. 6 pcs hydraulic top pressures per area / pump 1.1KW 6 pcs manual pressures per area Self-weight 1350kg. Very good condition. Available the same. ... mais informação
MSM VMP 3016 membrane press in TOP condition from 2021 Workpiece length: max. 3,000 mm Workpiece width: max. 1,580 mm Vacuum pump: 25m³/h Dimensions set-up: 3,350 x 1,810 x 910 mm Weight: approx. 450 kg There was very little use of the press. The membrane is in very good condition. #8058 Net price plus VAT
Pellet press 3-5 tons hour 2006 but very little used of the brand PTN 1100 150-300 Dutch make very very sturdy and very good condition with some spare parts, sale due to project dissolution ... mais informação
Year 2014-starting 06/2015 - capacity up to 400 kg / h -Motor 18.5 kW / 400 V, 50 Hz -Wood moisture < 12% Briquette size: -Diameter 95 mm -SEC heck -Length as needed included: -Storage containers/dispensing containers Control optional upon request. ... mais informação
Seehr well-preserved solid wood panels - gluing system TYPE PROFIPRESS P 3500-2 for max. wood length 3.5m Loading from the right in u-shape Year of construction 2003 General overhaul 2018 since then only test run Machine dismantled, on request with assembly against payment Seehr good condition immediately available
HOT PRESS type COLOMBO REMO HPC 8 / 160 second hand WITH SOLID STEEL PLATES Heavy-duty construction Hot water heating via a electric system on the back of the machine , not any connection needed , everything is included on the machine Total Kw for heating 25 Solid steel plates size mm. 3450 x 1400 n.08 pistons diam.mm. 90 max. thrust Ton. 160 specific pressure max. kgs.5 / cm2 opening mm. 660 emergency perimeter rope overall dimensions cm. 4500 x 2000 x 2700 H weight kgs. 8500
HOT PRESS Type KOLMAG useful size mm. 3000 x 1300 open mm. 450 n.06 cylinders volt. 380/50 weight : kgs. 4000 heating plan by water ... mais informação
Collier sleeves Fishbone CPM 16-2.5 ... mais informação
Collier sleeve Fishbone CPM 22-2.5 for pellet press ... mais informação
Freshly revised Koller to CPM Press 3022 or 7022 Punched, 2 new bearings, new sleeve, new intermediate ring, filled with grease. rest used. Koller are no longer needed due to machine changes. 3 pieces Available ... mais informação
Freshly Revised Koller to CPM Press 3022 or 7022 , Fshbone, 2 new bearings, new sleeve, new intermediate ring, filled with grease. rest used. Koller are no longer needed due to machine changes. 3 pieces Available ... mais informação