rociadoras de cola usadas para la venta

Description: - Hot gluing of pre-glued strips for finishing linear and shaped panels - Main motor 3.59 Kw -Protection against accidental burns - Height adjustable edge guide - Pre-tape rubber roller - Double flat scrapers on both sides of the panel - Edge header - Edge thickness 0.4 - 2 mm - Min/max panel thickness 12/43 mm - Working speed: 7 m/minApprox. Onsite Dimension. (l x w x h): 2,000 x 670 x 1,260 mm, weight approx.: 485 kg

Description: With Homag workpiece feeder TBL 100/25/12/F and Ligmatech workpiece return unit ZHR 30L/155/F  ,edge thickness: 3 mm, workpiece thickness: 12 -60 mm, feed: 18 m/min, gluing unit: Ja, snipping unit: Ja, rough trimming unit: Ja, fine trimming unit: Ja, profile trimming unit: Ja, universal milling unit: Ja, edge sanding unit: Ja, flat scraping unit: Ja, profile scraping unit: Ja, edge buffing unit: Ja, control: powerControl NC 21, return system: Ja, total power approx: 40 kW, Approx. Onsite Dimension. (l x w x h): 10,000 x 6,000 x 1,700 mm, weight approx.: 4,000 kg

Description: serial number AH00004035 variable track feed speed 12-18m/min panel thickness 8-60 mm thickness of edges in strips 0,4-8 mm thickness of rolled edges 0,4-3 mm max. section of rolled edges 135 mm² coil-holder plate diameter 780 mm distance between two successive panels 600 mm minimum panel length (100 mm min. width) 140 mm min. length of edge in rolls 180 mm min. length of edge in strips 220 mm min. panel width (210 mm min. length) (with unit adjustment modification) 60 mm opening for panel support roller 560 mm worktable height 900 mm Betriebsspannung 400 V, 3 phases, 50 Hz nennstrom 29A leistung 10 kA for futher technical detail please consult document ,PDF - OLIMPIC K 560 R PS 7.pdfserial number: AH00004035, Approx. Onsite Dimension. (l x w x h): 5,000 x 1,300 x 1,900 mm, weight approx.: 1,900 kg

Description: serial number AH00004898 track feed speed 11 m/min panel thickness 8-60 mm thickness of edges in strips 0,3-6mm thickness of rolled edges 0,3-3 mm max. section of rolled edges 135 mm² coil-holder plate diameter 780 mm exceeding material to the panel thickness 2+2 distance between two successive panels 600 mm minimum panel length (100 mm min. width) 140 mm min. length of edge in rolls 180 mm min. length of edge in strips 220 mm min. panel width (210 mm min. length) 90 mm opening for panel support roller 500 mm worktable height 900 mm Betriebsspannung 400 V, 3 phases, 50 Hz nennstrom 29A leistung 10 kA for futher technical detail please consult document PDF - OLIMPIC K 360 HP.pdf  ,serial number: AH00004898, Approx. Onsite Dimension. (l x w x h): 4,800 x 1,300 x 1,800 mm, weight approx.: 1,400 kg

Description: HOLZ-HER LUMINA 1380 Edgebander Feed rate: 10 - 18 m/min Operating dimensions Minimum workpiece length: 160 mm Minimum workpiece width: 60 mm Workpiece thickness: 8 - 60 mm Edging thickness: 0.4 - 8 (15) mmApprox. Onsite Dimension. (l x w x h): 5,740 x 1,200 x 2,100 mm, weight approx.: 2,000 kg, Serial Number of Manufacturer: 289/1-907

Description: IMA ADVANTAGE 4612 Edgebander Motor data: 380 V - 50 Hz - 15 Kw - 37 A Suction nozzle: 120 mm Pre-wired for Pre-milling Unit Space Edge thickness: 0.4 - 12 mm Workpiece thickness: 10 - 45 mm Edge material height: 14 - 55 mm End trimming unit Rough Milling unit MFA Milling Unit (Fine Milling + Corner Rounding) Profile Scraper + Flat Scraper + Buffing unit Feed approx.: 12 m/min Compressed air approx.: 7 bar serial number: 02305, edge thickness: 0,4 - 12 mm, workpiece thickness: 50 mm, feed: 12 m/min, control: IMA 1101, Approx. Onsite Dimension. (l x w x h): 6,100 x 1,800 x 2,000 mm, weight approx.: 3,100 kg

Description: HOMAG KL 76/A20 Edge Bander (incomplete)Approx. Onsite Dimension. (l x w x h): 8,400 x 1,060 x 2,100 mm, weight approx.: 4,500 kg ... más información

IMA milling unit - several milling motors immediately available from stock - price on request, depending on equipment and condition  ... más información

Description: - Hot use of pre-glued strips for finishing linear and shaped panels - Main motor 3.95 kW - Accidental burn protection - Height adjustable edge guide - Rubber pre-tape roller - Double flat scrapers on both sides of the panel - Edge header - Edge thickness 0.8 - 2 mm - Min/Max panel thickness 12/43 mm - Working speed: 7 m/min The item that is delivered is NOT the one shown in the pictures, but an equal oneApprox. Onsite Dimension. (l x w x h): 2,000 x 670 x 1,260 mm, weight approx.: 470 kg

gluing unit: yes, snipping unit: yes, rough trimming unit: yes, fine trimming unit: yes, flat scraping unit: yes, edge buffing unit: yes, Approx. Onsite Dimension. (l x w x h): 5,000 x 900 x 1,400 mm, weight approx.: 1,200 kg ... más información

Description: serial number: 36789 Technical specifications: total installed power 33 kW, 63A, 50Hz panel length - min 150 mm - max 3200 mm panel width - min 120 mm - max 3200 mm panel height -min 10 mm - max 60 mm edge thickness in the roll from 0.30 mm to 3 mm workpiece thickness from 10 mm up to 60 mm edgebanding strip height - min 15 mm - max 65 mm working line height 950 mm panel projection from drive belt 50mm adjustable feed speed from 10 m/min up to 24 m/min motorized height adjustment CNI control, display replaced with a flat screen anti adhesive spraying device joint cutting unit, 2 x motor 5kW, 12.000 rot/min edge feeder for roll, edge magazine for two edge rolls gluing unit for EVA adhesive, granulated 2 gluing units: 1 unit that apply the glue on the panel edge and 1 unit wich apply glue on the edge, for softforming applications. These units must change depending on the des ...

Description: serial number: 201011RX000004 machine type: monolateral, left side total installed power 21,8 KW, 59A, 50Hz panel length - min 120 mm panel width - min 60 mm panel height -min 10 mm - max 60 mm edge thickness in the roll from 0.4 mm to 3 mm edge thickness for strip: 3-16mm min length for strips: 180mm minimum distance between 2 panels: 800mm edge banding strip height - min 12 mm - max 63 mm adjustable feed speed from 10 m/min up to 20 m/min motorized height adjustment CN control, anti adhesive spraying device edge feeder for roll, edge magazine for two edge rolls gluing unit for EVA adhesive, granulated pressure unit for straight edges snipping unit, 2 x motor 0,5kw, 12.000 rpm rough trimming unit, 2 x motor 1,1 kw, 12.000 rpm fine trimming unit, 2 x motor 0.37 KW-12.000 rpm corner rounding unit, 2 x motor, 12.000 rot/min profile scraper unit  , serial number: 201011RX0 ...

Description: Curved edging machine. Power: 3.53kw ,  ,serial number: 130,201, Approx. Onsite Dimension. (l x w x h): 1,600 x 1,800 x 1,300 mm, weight approx.: 950 kg ... más información

Description: Semi-automatic edge bander for straight, round and shaped panels shear device and roll-holder plate for the application of rolled edges with 3 mm max. thickness serial number: 193,150, Approx. Onsite Dimension. (l x w x h): 1,500 x 1,700 x 1,300 mm, weight approx.: 900 kg ... más información

Description: Single-side edger with Gluing unit Eva. , Two -motor trimming unit. Trimming unit Tilting trimming unit ne-motor rounding unit. Variable speed drive in the feed. ,  ,serial number: 3,790, Approx. Onsite Dimension. (l x w x h): 3,500 x 2,000 x 2,000 mm, weight approx.: 2,000 kg

Description: Single-sided gluing edger composed of: Eva Glue unit End trimming unit, Trimming unit Cleaning brushing unit Maximum edge height 40 mm Edge from 0,4 to 2 mm Feed speed 5 m/min, Minimum working width: 60 mm Minimum working length: 200 mm Power of the milling unit 0,33kw at 12000 rpm Double row of upper clamping rollers: ,2 rollers of the pressure glue unit Double knife trimming unit Double trimming unit  , Large board support arm serial number: 11-L-1759, Approx. Onsite Dimension. (l x w x h): 2,500 x 1,200 x 1,400 mm, weight approx.: 600 kg

Description: This machine ,is ,checked and refurbished by the distriutor , and he offer 6 months guarantee Single-side edging machine Joint triming unit , EVA gluing ,unit. Two - motor end trimming unit. Straight trimming unit. Inclined trimming unit. Profiling unit, 1 motor . Scraping ,unit. Scraping - edge unit. Cleaning brushes unit.  ,serial number: 117, joint trimming unit: si, gluing unit: si, snipping unit: si, edge buffing unit: si, return system: no, total power approx: 12,3 kW, Approx. Onsite Dimension. (l x w x h): 5,500 x 2,000 x 1,950 mm, weight approx.: 700 kg

Description: Single-side edging machine composed by: Inlet spindle moulder unit , Inlet Liquid unit ,at the entrance. EVA glue unit. End Trimming unit 2 motor. Straight refilter unit. Two-motor rounding unit. Scratch-off group. Scraper-cleaning unit Cleaning brushing unit . Approx. Onsite Dimension. (l x w x h): 8,000 x 2,000 x 2,300 mm, weight approx.: 3,600 kg

Description: One-sided edge gluer for machining straight workpiece edges and for gluing and finishing different edge materials in longitudinal and transverse grain Free space for MF21 router set Extended pressure zone / 6 emphasis rollers instead of 2 Automatic displacement of run-in ruler one side Retraction system 2 rolls Workpiece overhang 40 mm Sliding slide Workpiece support for single-sided machine Workpiece support extension Feed continuously adjustable 18-25 M/min. Pre-installation boomerang Spray unit anti-adhesive top/bottom Spray unit with 4 nozzles with anti-friction agent Joint cutter/joining cutter aggregate KAL300/S2 Jointing cutters manual displacement system Basic bonding part A3 Extension walk-in 500 mm Quick clamping system for application unit QA/PU Compact bonding unit PU65 Application unit PU65 (exchangeable) Automatic displacement of pressure zone Hood unit HL84 p ...

Description: Edge Bander: STREAM B1 8.0 with LIGMATECH ZHR 05 BOOMERANG Return System Machine Specifications STREAM B1 8.0 S/N: 20798 Distance between centers: 8000 mm Total length: 9200 mm + Return Panel length: min 150 mm - max 3200 mm Panel width: min 100 mm - max 3200 mm Panel height: min 10 mm - max 60 mm Thickness of edgebanding strip in rolls: min 0.3 mm - max 3 mm Thickness of edgebanding strip in strips: max 20 mm Edgebanding strip height: min 15 mm - max 65 mm Working line height: 950 mm Panel projection from drive belt: 35 mm Drive track speed of advance: min 10 m/min - max 24 m/min Suction air speed: 30 m/sec Air supply pressure: 7 ÷ 10 bar Machine length: 9140 mm Width: 2600 mm Height: 2100 mm Return System Specifications LIGMATECH ZHR 05 BOOMERANG Longitudinal Processing Panel length: 300 - 2500 mm Panel width: 60 - 800 mm Cross Processing Panel length: 300 - 800 mm P ...