espalhadores de cola usadas para venda

Equipped with joint trimming unit, single edge magazine, edge thickness approx. 0.4 - 2 mm, workpiece thickness approx. 10-42 mm, feed rate approx. 8/10 m/min, gluing unit, snipping unit, flush trimming unit, copy trimming, profile scraper, flat scraper, buffing unit, extendable workpiece support3600 x 900 x 1500 mm1000 kguncheckedloaded on truck

• Edgebander • Serial number 8657401 • Total installed power approx. 31 KW • Edge thickness from 0.40 mm up to 8 mm • Worpiece thickness from 8 mm up to 40 mm • Minimum workpiece lenght 120 mm • Minimum workpiece width 120 mm • Feed speed 16 m/min • Feed motor 2.20 KW • Control • Joint trimming unit, 2 x motors • Edge feeder for strips and roll, edge magazine for one edge coil • Gluing unit with pot for granulated hot melt adhesive • Pressure group with (1+3) rollers • End trimming unit, 1 x motor 0.45 KW-12000 rpm • Rough trimming unit, 1 x upper motor 1.12 KW-12000 rpm • Profile trimming unit, 2 x upper motor 1.00 KW-12000 rpm, 2 x lower motor 0.30 KW-12000 rpm • Profile scraping unit • Edge buffing unit, 2 x motor 0.37 KW-1500 rpm • Milling group, motor 3 KW7650x1600x1700 mm3200 kguncheckedloaded on truck

• Edgebander • Serial number 792/0-509 5002948 • Edge thickness up to 3 mm • Edge thickness in roll from 6 mm up to 45 mm • Minimum workpiece lenght 180 mm • Minimum workpiece width 60 mm • Adjustable feed speed 8 m/min • Feed motor 1.10 KW • HOLZ-HER 1903 edge feeder for strips and roll, edge magazine for one edge coil • HOLZ-HER 1906M catridge glue system • HOLZ-HER 1912 pressure group with (1+1) rollers • HOLZ-HER 1918 end trimming unit, 2 x motor 0.22 KW-9000 rpm • HOLZ-HER 1942 M fine trimming unit, 2 x motor 0.60 KW-18000 rpm3250x1100x1800 mm700 kguncheckedloaded on truck

• Edgebander • Serial number 568/9-710 (1997) • Edge thickness from 0.40 mm up to 25 mm • Edge thickness in roll from 6 mm up to 60 mm • Minimum workpiece lenght 140 mm • Minimum workpiece width 60 mm • Feed speeds: 8 and 16 m/min • Feed motor 2.60 KW • HOLZ-HER 1961 joint trimming unit, 2 x motor 2 KW-12000 rpm • HOLZ-HER 1903 edge feeder for strips and roll, edge magazine for one edge coil • HOLZ-HER 1906 catridge glue system • HOLZ-HER 1926 pressure group with (1+2) rollers • End trimming unit, 2 x motor 0.35 KW-9000 rpm • HOLZ-HER 1966 fine trimming unit, 2 x motor 1.00 KW-12000 rpm • HOLZ-HER 1929 profile scraping unit • HOLZ-HER 1983 profile trimming unit, 1 x motor 0.60 KW-18000 rpm • Edge buffing unit, 2 x motor 0.20 KW-1370 rpm6200x1300x1800 mm1500 kguncheckedloaded on truck

- Hot use of pre-glued strips for finishing linear and shaped panels - Main motor 3.95 kW - Accidental burn protection - Height adjustable edge guide - Rubber pre-tape roller - Double flat scrapers on both sides of the panel - Edge header - Edge thickness 0.8 - 2 mm - Min/Max panel thickness 12/43 mm - Working speed: 7 m/min The item that is delivered is MAY NOT BE the one shown in the pictures, but an equal one2000 x 670 x 1260 mm470 kgnever used/newloaded on truck

-Joint milling -Automation package for small batch production -Glue specification for workpiece thickness max. 60 mm -Pre-milling 2 motors / swivelling -Horizontal spray nozzles Lubricant -Multiple processing unit with 2 motors (max. 4 profiles) -Multiple profile scraper unit (max. 4 profiles) -Space reserve approx. 600 mm -Surface scraper -Copy buffing unit with 4 buffing motors -Cleaning agent spray nozzles top and bottom -Smoothing unit for smoothing and eliminating white spots Available from November / December 2024 yes after delivery date of the new machine-1 kguncheckedloaded on truck

• Edgebander • Edge thickness from 0.40 mm up to 25 mm • Worpiece thickness from 6 mm up to 60 mm • Adjustable feed speed: 8 m/min - 20 m/min • Control • Joint trimming unit, 2 x motor 2 KW-12000 rpm • Edge feeder for strips and roll, edge magazine for one edge coil • HOLZ-HER 1906 cartridge glue system • Pressure group with (1+2) rollers • End trimming unit with 2 motors • HOLZ-HER 1823 fine trimming unit, 2 x motor 0.60 KW-12000 rpm • Profile scraping unit • HOLZ-HER 1983 profile trimming unit • Edge buffing unit • Milling group, motor 3.80 KW-12000 rpm • Sanding belt unit7550x1150x1900 mm4000 kguncheckedloaded on truck

• Edgebander • Serial number 8657301 • Total installed power approx. 31 KW • Edge thickness from 0.40 mm up to 8 mm • Worpiece thickness from 8 mm up to 40 mm • Minimum workpiece lenght 120 mm • Minimum workpiece width 120 mm • Feed speed 16 m/min • Feed motor 2.20 KW • Control • Joint trimming unit, 2 x motors • Edge feeder for strips and roll, edge magazine for one edge coil • Gluing unit with pot for granulated hot melt adhesive • Pressure group with (1+3) rollers • End trimming unit, 1 x motor • Profile trimming unit, 4 x motor 0.0.30 KW-12000 rpm • Profile scraping unit • Edge buffing unit • Milling group, motor 3 KW7620x1150x1670 mm4000 kguncheckedloaded on truck

• Edgebander • Serial number 8685206 • Total installed power 26 KW • Edge thickness from 0.40 mm up to 8 mm • Worpiece thickness from 8 mm up to 40 mm • Minimum workpiece lenght 120 mm • Minimum workpiece width 120 mm • Feed speed: 16-28 m/min • Feed motor 1.50 KW • NT20S programmable control, PT software • Joint trimming unit, 2 x motor 3.70 KW-12000 rpm • Edge feeder for strips and roll, edge magazine for one edge coil • Gluing unit with pot for granulated hot melt adhesive • Pressure group with (1+3) rollers • End trimming unit, 2 x motor 0.37 KW-12000 rpm • Fine trimming unit, 2 x motor 0.73 KW-12000 rpm • Profile trimming unit, 4 x motor 0.37 KW-12000 rpm • Profile scraping unit • Edge buffing unit, 2 x motor 0.37 KW-1330 rpm8300x1300x2100 mm3000 kguncheckedloaded on truck

INVITATION FIX on 5 July 2024 in the morning ! AUTOMATIC ADJUSTMENT OF OPTIMAT INFEED GUIDE EXTENSION INFEED 500 MM OPTIMAT SLIDING CARRIAGE SEPARATING AGENT SPRAYER TOP/BOTTOM AUTOMATIC ADJUSTMENT OF OPTIMAT PRESSURE ZONE PRESSURE TANK FOR PU GLUE CONTAINER FRONT PART PNEUMATIC ADJUSTMENT OF CROSS-CUT MOTOR PNEUMATIC ADJUSTMENT OF PRE-MOULDING UNIT MOULD MILLING UNIT FK11 MANUAL BELT SANDING UNIT KS10 PNEUMATIC ADJUSTMENT KS10 BEVELLED/RADIUS SANDING UNIT PROFILE OPTIMAT PN10 FINISHING UNIT FINISHING UNIT FA11 TOP / BOTTOM10000x 2400 x 2200 mm5500 kguncheckedloaded on truck

• Edgebander • Serial number 147/9-909 (1999) • Edge thickness in strips up to 13 mm • Edge thickness in roll from 0.30 mm up to 5 mm • Worpiece thickness from 6 mm up to 45 mm • Minimum workpiece lenght 180 mm • Minimum workpiece width 60 mm • Feed speed 11 m/min • Feed motor 1.50 KW • PLC control system • HOLZ-HER 1902 edge feeder for roll, edge magazine for one edge coil • HOLZ-HER 1906 cartridge glue system • HOLZ-HER 1913 pressure group with (1+2) rollers • HOLZ-HER 1918 end trimming unit, 2 x motor 0.35 KW-9000 rpm, tilting up to 10° • HOLZ-HER 1942 M fine trimming unit, 2 x motor 0.60 KW-9000 rpm, tilting up to 15° • HOLZ-HER 1929 profile scraping unit • HOLZ-HER 1940 edge buffing unit, 2 x motor 0.12 KW-1640 rpm4200x1200x1750 mm2000 kguncheckedloaded on truck

Equipment: - Gluing part for hot-melt adhesive granules - Contact heating shoe for workpiece preheating - Automatic edge magazine for roll material and fixed lengths with roller plate, Ø800 mm - Pressure zone with pneumatically driven main pressure roller and special holding pressure roller - Inlet ruler with fixed joining dimensions 1, 2 + 3 mm - Centrally adjustable top pressure - Joining milling unit 2 x 2.2 kW 200 Hz - Flush milling unit, 2 x 0.27 kW, top and bottom with vertical and horizontal scanning, swivel range 0-15 degrees - Scraper unit for PVC edges - Buffing unit 2 motors, 0.09 kW each - Workpiece support extendable to 350 mm - Noise protection cladding including central extraction nozzle Ø100 mm Specifications: Workpiece thickness 8 - 50 mm Edge thickness: Fixed lengths 0.4 - 3.0 mm max. (3 x 55 mm) Roll cutting 0.4 - 3.0 mm (max. 3 x 30 mm / 1.0 x 5 ...

Edgebander HOLZ-HER Sprint 1327 Pre-milling cutters Hot melt glue tank Pressure rollers Corner rounding Trim saws Polishers Feed speed from 10 to 18 m/min Year of manufacture: 2013 The edgebander is in continuous operation and available for viewing at our company. VAT invoice Price: 21500EUR EXW

2-component gun, multi-function gun, cartridge gun, cartridge press, battery gun, battery-powered cartridge press-Manufacturer: Meritool, cordless gun PowerPush 5026 Type 2-Cartridge: 600 ml-Accessories: incl. battery 20 V, see photos-Dimensions: 630/80/H290 mm-Weight: 2.3 kg ... mais informação

Edge banding machine Make: IMA Model: Compact/U/PC/F/DV/6212 Year of Make: 1997 Edge height: 14 – 55 mm Edge thickness: 0.4 - 12 mm Panel thickness 10 – 50 mm Min plate width: 60 mm Min plate length: 150 mm Feed: 12 m/min Total length: approx. 7200 mm Weight: approx. 4000 kg Equipment: Joining unit / pre-milling / 2 x 3 KW Gluing unit for hot melt adhesive Cross-cut unit 2x Milling unit / flush milling Multiple machining unit / shape milling unit / corner copying / upper longitudinal edge Multiple machining unit / shape milling unit / corner cutting / lower longitudinal edge Groove milling / profile milling horizontal Vertical grooving Scraper unit / profile scraper blade Buffing unit / top – bottom

Edge thickness 0.4-3 mm Plate thickness max 45 mm Joint milling Kappsaegen Buendingfraesen Scraper blades Flat scraper blades  ... mais informação

Edge thickness 0,4-3 mm Panel thickness max 45 mm Speed 10 m/min Premilling Glue cartridge system Cutting Trimming unit Flat scraper Glue scraper  ... mais informação

Edge Banding Wood-Her Type 1315-2 Machine No. 127/0-111 Year of manufacture 2001 CE max. banding thickness 8 mm max. workpiece thickness 45 mm min. workpiece width 60 mm Min. workpiece length 180 mm Glue system with cartridge Glue manga over glue nozzle Heat-up time 4 minutes Individual feeding of the edge possible Feed speed 8/16 m/min. (without corner copying) Pruning shears up to 3 mm Cross-cut saw as double unit type 1918 No. 2449 Milling Combination Unit Flush/Chamfer/Radius Type 1942 No. 8276 Corner Copy Unit Profile Scraper Type: 1929 No. 4252 Buffing unit PLC route control Control panel with buttons Pull-out roller support Weight approx. 1100 kg

- Inlet ruler motorised adjustable - Inlet stop pneumatically controlled - smooth PU top pressure rollers. Use on particularly sensitive workpiece surfaces. - Workpiece support with roller rail, approx. 600 mm extendable - Noise protection equipment. ELECTRONIC CONTROL POWER CONTROL PC 20+ Software preparation for release agents/cleaning agents Specifications: - Feed rate 8 - 14 m/min - Feed max. with shape milling machine 14 m/min - Working height 950 mm - Pneumatic connection min. 6 bar Workpiece and edge parameters - Workpiece width min: - For workpiece thickness 8-22mm 70 mm - For workpiece thickness 23-40mm 120 mm - For workpiece thickness 41-60mm 150 mm Depending on the workpiece length - Workpiece protrusion 38 mm - Workpiece thickness 8 - 60 mm - Edge height max. = workpiece height + 6 mm - Edge material roll ¦ 0.4 - 3 mm - Edge cross-section max. -  ...

Code: 0392 Brand: OMMA - ITALY Model: FT 1700 - CE Standard Automatic 2-roller glue spreader for wood panels, laminates, technical panels, foamed, soundproofed, plasterboard, doors , suitable for uniform spreading of many fluid glue types, such as urea formaldehyde, resorcin, melamin, phenol resin, polyvinyl, epoxyde adhesives etc- CE Standard Technical data: Electrowelded steel frame with box-type construction Electric opening between the rollers Rubber coated rollers Stainless steel collecting tank of the cleaning water Useful working width mm 1700 Working speed adjustable from 5 to 25 mt/min by means of motovariator Opening between rollers mm 90 Rollers diameter mm 185 Working table height mm 830 Installed power Kw 1,1 Overall dimensions mm 2500 x 800 x 1600 h Weight kg 500