- A. MEIER (1)
- A.M.P.E.R.E. (1)
- AARDWOLF (1)
- ABAKUS (1)
- ABAWERK (1)
- ABB (1)
- Adixen (2)
- AERZEN (1)
- AGROTOP (1)
- AIR LIQUIDE (1)
- AIRFLEX (1)
- AIRMEX (1)
- AIRPEL (1)
- ALCE (1)
- ALFA LAVAL (1)
- ALFA-LAVAL (1)
- ALLWEILER (1)
- ALTRONIC (1)
- AMADA (3)
- AMF PANEL (1)
- AMK (2)
- AMOT (2)
- AMP (4)
- ANEST IWATA (1)
- ANGELANTONI (1)
- ANGELO VECCHIO (2)
- ANYCUBIC (1)
- APV (1)
- ARI (1)
- ARP (1)
- ARZUFFI (1)
- AS EXCLUSIV (1)
- ASECOS (2)
- ASSFALG (1)
- AT (2)
- ATEC (1)
- ATLAS COPCO (1)
- ATOM (1)
- AUSA (1)
- AVK (1)
- AVOCENT (1)
- BACHER (1)
- BANK (1)
- BASE (3)
- BAUER (3)
- BAYERN TOOLS (5)
- BBC (1)
- BEHR (1)
- BERGER (1)
- BERNARDO (1)
- BERNER (1)
- BETA (1)
- BETTER PACKAGES (1)
- BIG (7)
- BILZ (6)
- BINDER (1)
- Bito (2)
- BMS (1)
- BOC Edwards (2)
- BOEKELS (1)
- BOFA (6)
- BOLL + KIRCH (1)
- BORG WARNER (1)
- BOSCH (9)
- BOSCH REXROTH (1)
- BOSCHERT (2)
- BOSTITCH (1)
- BOY (1)
- BRADY (1)
- BRAZILIAN SHIPYARDS (1)
- BROVIND (1)
- BRUGMAN (1)
- BRYAN DONKIN RMG (1)
- BUDERUS (1)
- BUHLER (1)
- BULLERJAN (1)
- BUSCH (1)
- BUX (3)
- BÖSSINGER (1)
- CA-02 (1)
- CABER (3)
- CALAMIT (1)
- CAME (1)
- Capstone (2)
- CARRELLIFICIO PADOVA (1)
- CASE TECH (1)
- CASTIGLIA (1)
- CATERPILLAR (1)
- CBRAILLON (1)
- CERA (1)
- CFM (1)
- CLEAN FORCE (1)
- CLENA (2)
- CODEMA SYSTEMS (1)
- COLD JET (1)
- COMAC (1)
- COMET (1)
- CONCEPT LASER (1)
- CONTEC (1)
- COSMOS UTENSILI (1)
- ... más
Fabricante:
(Categoría: 2500)
Año de construcción: 2009
usado
850 € Description: Waste water treatment systemApprox. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 1 kg ... más información
Año de construcción: 2009
usado
50 € Description: Weight training multistation Serial number 572Approx. Onsite Dimension. (l x w x h): 1,500 x 950 x 2,000 mm, weight approx.: 115 kg ... más información
Año de construcción: 2010
usado
Due to project abandonment, I offer here my Twin Heat wood chip heater, it is built in 2010 I bought the heater myself 3 years ago, disassembled, cleaned and replaced and reassembled defective parts It is mounted on a sturdy steel plate and can be moved with a forklift Originally, I wanted to use it as a hall heating system and install it in a shipping container There are a lot of new parts installed, such as valves, expansion vessels, bearings, rotary wheel blades, thermal drainage protection and a lot of small stuff You can either burn solid fuel or wood chips, but it has a huge combustion chamber The rotary valve is completely re-lined with sheet metal and welded and re-mounted The wood chip burner has been cleaned and resealed, extinguishing system has been provided with new hoses I had the system briefly test runs with water to test it, everything worked You can remove the ...
Año de construcción: 2010
usado
75 € Description: Technical details: liter capacity 625 / min l, delivery pressure 'unpressurized' bar, coolant capacity 200 l, additional information: system made of stainless steelApprox. Onsite Dimension. (l x w x h): 800 x 600 x 1,200 mm, weight approx.: 400 kg ... más información
Año de construcción: 2010
usado
190 € Description: 2 pieces, maximum load 5500 kg, maximum pressure 520 bar, ,untestedApprox. Onsite Dimension. (l x w x h): 450 x 300 x 600 mm, weight approx.: 50 kg ... más información
Año de construcción: 2010
usado
110 € Description: Industrial sweeper Serial number 4451 - 050049991010 Power 0.60 kW ,Ø Brush 200 mmApprox. Onsite Dimension. (l x w x h): 700 x 1,500 x 900 mm, weight approx.: 127 kg ... más información
Año de construcción: 2010
usado
850 € Description: Serial number 105039 , Maximum delivery rate 11.0 to 28 l/min , Voltage 230 V , Diesel tank capacity 20 l , Maximum permissible operating pressure 200 bar , Maximum inlet temperature 60 ° C without further accessoriesApprox. Onsite Dimension. (l x w x h): 800 x 600 x 900 mm, weight approx.: 120 kg
Año de construcción: 2010
usado
790 € Description: Serial number 1005039 , max. flow rate 11 to 28 l/min Voltage 230 V Diesel tank capacity ,20 l Maximum permissible operating pressure ,200 bar Maximum inlet temperature 60° C without further accessoriesApprox. Onsite Dimension. (l x w x h): 800 x 600 x 900 mm, weight approx.: 120 kg
Año de construcción: 2010
usado
Altronic Surface Coating Swiss manufacturer As good as new, very precise system ca 300 Bh Year of construction 2009 New price of the system 334.000,- € lt invoice / without commissioning was developed for the solar industry to apply wafer-thin coatings of sulfur to solar modules, here it was important to achieve exact distribution, and it had worked. equipped with 9x linear vibrators type E-PLF-0.65-IP54 Total dimensions of the coating system: 180 w x 220 t x 210 h Dimensions: approx. 130w x 160 cm incl. control and adjustment table, possibly a belt conveyor is also available Shipping: 650,00 International shipping only on request, not EU can be very different, will be billed exactly
Año de construcción: 2011
usado
Used ProJet⢠Parts Washer from 3D Systems for sale. Fully functional, with signs of use., [Buy 2011 3D Systems ProJet⢠Parts Washer now](https://www.layerbylayer-shop/p/2011-3d-systems-projet-tm-parts-w asher-gebrauchter-zustand) ... más información
Año de construcción: 2011
usado
Año de construcción: 2011
usado
Hot water buffer tank with insulation Year of construction: 2011 Condition: Used Specifications Connections: 4 screw-ins for immersion sleeves: inner diameter 1/2" 2 flange connections: inner diameter 80 mm 1 filling neck: inner diameter 1 1/4" Metrics Height: 3,550 mm (boiler only) Diameter: 1,198 mm Circumference: 3,765 mm Volume: approx. 3,982 m³ Operating pressure: max. 4 bar Weight: approx. 500 - 600 kg Insulation: 160 mm The buffer tank has been reworked on the outside with rust protection and 2 coats of paint. Transport can be arranged through our house on request! Price: € 3,900.00 plus VAT ex Grunow site (Brandenburg) (Subject to changes and errors regarding technical data and prices!) In accordance with our terms and conditions, we would like to point out once again that cheques and bills of exchange cannot be accepted.
Año de construcción: 2011
usado
25 € Description: top size 370x370x50 mmApprox. Onsite Dimension. (l x w x h): 500 x 500 x 200 mm, weight approx.: 30 kg ... más información
Año de construcción: 2011
usado
This PETIG RPS-320 TWIN 3000 punching machine was manufactured in 2011. It features a Siemens 57 numerical control system and comes with a hydraulic unit RKP 23.0 for enhanced operation. The machine includes a linear feed table, switch cabinet, and both infeed and outfeed frames. Its equipped with a tool for punching a slotted hole measuring 20 x 5mm, making it highly effective for precise punching tasks in sheet metal processing. Consider the PETIG RPS-320 TWIN 3000 machine we have for sale. Reach out for more information.
Año de construcción: 2011
usado
CNC/basic joystick version Zoller Steuereung Version Pilot 4.0 Version 1.19 IPC Elektronik Pilot 4.0 with Cockpit Pilot control unit with 23-inch color display Touch Max tool length Z= 600 mm Tool diameter D= 440 mm Throat gauge d= 200 mm High-precision spindle Concentricity accuracy 0.002 mm Universe Force Actuated Tool Clamping for Steep Taper Autofocus /Venturion 600 Rotary encoder DNC incl. format generator and output format library Storage adapter on the housing table Printer for TH labels The tool presetter is in very good condition Since there is a maintenance/repair contract with Zoller
Año de construcción: 2012
usado
50 € Description: Carrying capacity: 500 kgApprox. Onsite Dimension. (l x w x h): 1,400 x 840 x 1,100 mm, weight approx.: 150 kg ... más información
Año de construcción: 2012
usado
40 € Description: Load capacity 150 kg, on castorsApprox. Onsite Dimension. (l x w x h): 1,150 x 700 x 1,150 mm, weight approx.: 50 kg ... más información
Año de construcción: 2012
usado
20 € Description: Maximum temperature 90° . 6 kW 16 AApprox. Onsite Dimension. (l x w x h): 600 x 1,300 x 1,000 mm, weight approx.: 160 kg ... más información
Año de construcción: 2012
usado
Nominal diameter 40 mm, angle valve , 24 V , 2.5 W ... más información
Año de construcción: 2012
usado
220 € Description: Pickup of goods only by tractor truck (with maximum 7-meter box/trailer) or van. No semi-trailer trucks (with body more than 7 meters)Approx. Onsite Dimension. (l x w x h): 400 x 600 x 600 mm, weight approx.: 25 kg ... más información