Fabricante:
(Categoría: 302)
Drive power: 110kW, with reversing Film Take-Off Kirion T 1300, Monoblow Head Kirion 120/300-1, further accessories and documentation. ... más información
Was used for PVC, PUR and TPEV, with control cabinet, used screws and one used cylinder, with documentation, was maintained regularly. ... más información
Output: 140-180kg/h, screw diameter: 50-103mm, screw length: 1300mm, max. screw rotational speed: 43/min, connected load: 25kW, operational hours counter: 62,590h, including dosing unit with hopper, vacuum pump, cylinder cooling aggregate and screw temperature control. ... más información
Screw diameter: 59mm, screw rotational speed: 25-250/min, with complete documentation, control cabinet, screen changer, side dosing unit, granulator and additional accessories. ... más información
Includes (1) Single Screw Extruder PME60/35, screw diameter: 60mm, screw length: 35D with degassing vacuum pump, barrel heating zones: 7x 20kW, throughput: 60-180kg/h, power: 70kW, with integrated electrical control cabinet with temperature controllers and all connections, continuously operating screen changer type L-026 with two channels, granulating nozzle for 20 strands, stainless steel water bath with deflection rollers and cooling fan, dosing unit with hopper, (2) Double Screen 800/300 stainless steel with double screen chute, round perforation 8mm for downstream connection of a transport suction unit, monitor control, strand pelletiser GR 250, infinitely variable collection heating, single knife, inclined cut, pneumatically pressed feed roller, outlet with slide (3) Dry Air Dryer E200 with one fully insulated 1000l V2A vessel, drying throughput: 250kg/h, stationary unit, easy clean ...
PET films were produced on the extruder, working width: 650-800mm, output: 600-700kg/h, with cooling spirals, new extruder screw, degassing system, other spare parts and documentation, without dosing system, an on-site inspection is possible. ... más información
Ribbon Extruder line Barmeg FB9-1300-WS/HT composed of Motorized mixer – 100 kgs mixing capacity Dosing unit – hopper 200 kg , sensor , Main engine – Barmeg, 3 phase, 190KW Screw and tube – approx. 6000 kgs/24h capacity, polypropylene Nozzle – Hanger Type, 1340 mm Plastic Film Width Water Bath – Cooling System, Closed Circuit 1000 L Capacity Cutting unit – 1340 mm plastic film width Furnace – Hot Air Blower, 90KW Goddets – 2 x segmente godet of the stretching unit 4 and 6 x rollers, oil heater, cooling cylinder with cooling system Full Fibrilator system – Needle roller working width 1300mm Winder Part – Sahm Winder 240E 232 Independent Winder Edge control unit – 2 x motor Shredder – 1.9 KW with return to hopper Thickness measurement – Betacontrol (year 2003), Barmeg control system
Plasmac ECO60HC recycling machine from 2014. Output approx. 100 - 120 kg/hour. A barrel and the screw is refurbished A motorized roll feeding unit is included Complete with water chiller unit. ... más información
Manufacturer: KUNG HSİNG Model: KS-CFLL65+100T Year: 2017 Number of layers: 3 Film structure: A-B-C Thickness interval: 20 my ~ 200 my Material: LDPE, LLDPE, EVA, EVOH, MLLDPE, HDPE Film Width: 2300mm max. Produktion widt: 2200mm Output (Kg/h): 600 Kg/h (Depends on film dimensions and thickness.)
Extruder for the production of three-layer LDPE film, German company Kifell. Capacity -150 kg/h. Foil thickness 0.03 - 0.2 mm. Width of upper rollers 1500 mm. Dolici double-sided winder 1230 mm. The width of the mouthpiece is 70 mm. Year of production 1985, in continuous production since 2010, available for viewing and testing in our company.
Thermoforming line for the production of OMV F-85 polystyrene plates, made in Italy, 2004, in operation no more than 2 years. The condition is almost new. The scheme of work is a closed technological cycle. Line composition: Extruder with a co-extruder D100 + D60 with a unit for mixing and dosing the material, calender unit, thermoforming machine F-85 with a system for stacking products, packaging machine, crushing unit, thermostats for calenders and thermal stamps, thermal stamp for dessert plates 167 mm 20 nests, thermal stamp plates flat 210 mm 12 nests with inserts for the production of plates 2x and 3x sectional. In working order.
Double carriage blow molding machine still installed and working, with siemens s7 plc, temperature adjustment from plc and possibility to store recipes. ... más información
I sell a line for the production of products from VPS and VPS (Extruder, VFM, Recycling) BU In prefabricated working order. made in China, 2014 There is an opportunity to demonstrate the line operability. Equipment: 1) PS extrusion line (DY-PSP 105/120) LONGKOU DEYLI MACHINERY CO., LTD. Capacity 200kg / h. Sheet width 1040 mm Max. Power consumption 125 kW. Overall dimensions V3m / W1.5m / D7m / D7m 2) Automatic Forming and Cutting Machine (DY-1040) LONGKOU DEYLI MACHINERY CO., LTD Max. Power consumption 156KW. Capacity up to 21.6 thousand pieces / h. W3m / W3.5m / D18m 3) Complex for recycling recycled polystyrene (Recycle machine) model DY-180 + 120/100 LONGKOU DEYLI MACHINERY CO., LTD (Crusher, Extruder, Grinder, Granulator) Productivity 90kg / h. Max. Power consumption 65KW. W3m / W2m / D5m 4) Dosing gas pump 4D-100/50 2.2 kW HANGZHOU ZHIJIANG PETROCHEM ...
Extrusion line model FCL 21/SH PRO-CAST Dolce with refrigeration equipment Brand (model): FCL 21 / SH PRO-CAST Dolce with refrigeration equipment No. 1 Release year: 2004 Manufacturer: BIELLONI CASTELLO s.p.a., Italy Three-layer cast extrusion line for the production of stretch film, made in Italy. Commissioning - 2005. The maximum real productivity is up to 800 kg/h depending on the thickness of the produced film. The winding speed of finished products is up to 350 m/min. Film thickness from 15 to 50 microns. Web width 1800 -2000 mm. Width of rolls of finished products from 125 mm. The structure of the produced film is A/B/C, the ratio of layers is 16/68/16. The composition of the line: three extruders are included, each of which works on one layer of film. Three Doteco dispensers are installed on each of the extruders, which allows mixing up to three components in each l ...
Extrusion line for the production of heat-shrinkable OPS (oriented polystyrene) film Product structure A/B/A Recyclable materials (mixed) SBC, GPPS Thickness 40-60 microns % shrinkage 70-72% Net width / when leaving TDO 2780 / 3200 Main extruder ZSK Mc70 plus Coextruder 50 mm Static mixers - in the main extruder and co-extruder lines. Die - Nordson Autoflex VI-R H40 Die 750 mm (28 bolts) Roll stack - 2 shafts (with mirror surface - chrome) MDO 6 shafts (1, 2 - preheating; 3-4 stretching 1:1.2; 5.6 - annealing) 2 thickness measurement sensors from NDC (USA, UK) with automatic thickness control, new control equipment installed in 2018. (computer and software), sensors - overhaul in the UK from the manufacturer (NDC) - 2019-2020 TDO stretch up to 1:5 Filmatic winder from W&H (Germany), Max. roll diameter 580mm, expandable to 800mm line speed (mechanical) up to 50 m/min Volt ...
We sell lines 80/156, 65/132 and 55/110 for the production of WPC products (terrace boards, siding, fence boards, window sills, panels, logs, etc.) The equipment is installed at the enterprise, fully operational, and can be started. We will help with commissioning and training ... más información
Output: Approx. 200 – 400 kg/h (info taken from manufacturer brochure, no warranties regarding actual product specific output) Extrusion height: 1250 mm Barrel: Feeding, mixing and output zone in good condition (measuring report by DEGUMA available), slight wear marks Feeding opening 110 x 85 mm, with feeding hopper Feeding roll (coolable), overhauled 4 tempering zones, plus screw and feeding roll (if required) Head: Without head Tempering: Without temperature control units, available upon demand Reducer: Dorstener spur gear i= 20.15,n2= 67,5 rpm recirculating oil lubrication system Driven by V-belts, i= 1,775 Motor: Siemens DC 70.5 kW motor, 50-2160 rpm, 168 A Dimensions: Approx. 3500 x 2000 x 2000 mm (length x width x height) Weight: Approx. 3000 kg Machine mounted on base plate Machine is cleaned
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... más información
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... más información
For Sale: Complete PP Bag Production Line A complete PP bag production line is available for sale. This equipment is ideal for the production of high-quality PP bags for various purposes. All devices are in excellent condition and ready for immediate use. The price includes the following items: Plastic Extruder ATA Machinery AE 1100 - Quantity: 1 unit. This extruder is a key part of the PP bag production process, allowing for high-quality plastic extrusion. Weaving Looms for Bags ATA Machinery AL6SD - Quantity: 17 units. These looms enable precise weaving of the fabric for PP bags, ensuring durability and quality of the weave. Extrusion Tape Winders ATA 350 - Quantity: 176 units. The winders are a crucial part of the production process, enabling precise and efficient winding of the extruded tape. Fabric Cutting Machines ATA ACS 30 - Quantity: 2 units. These machines all ...