otras máquinas para el plástico usadas para la venta

TECNOSALD 1600 welder Year of manufacture: 2007 Weight: about 5500 kg Working width 1600 mm Installed power 30 kW New control - HMI panel, PLC controller and Mitsubishi inverters Perforating knife Photocell Antistatic device Double decoiler 3m long table with automatic bag removal Film parameters: Thickness: Min: 0.018 Max 0.100mm x 4 Length up to 3000 mm Number of ticks per minute: Foil up to 0.030 up to a length of 700 mm 50-60 Film above 0.030 mm 15-18

Mechanical speed 1200 m/min Maximum pre-stretch 400% (1m = 5m) Thickness of the film 530 mm Film width 300550 mm Finished roll diameter, at most 250 mm Jumbo (mother) roll diameter, at most 500 mm ... más información

The Wheel Dehumidifier, WDS.E series, capable of operating at constant dew point (dew point) has the following technical features: Microprocessor control panel with touch screen display, with integrated NEBULA interface card that allows if connected, access to 4.0 ready, remote management and data collection and be able to access the 36-month warranty when combined with scheduled coupons. 400V±10%/3 ph+N/50Hz electrical panel with 24 Vac auxiliary circuits and static relay resistor control. Built in accordance with CE regulations. Inverter, for modulation and management of air flow rates as required productivity changes. ENERGY function for management of material throughput. R.C.E. function allows automatic closing of heating elements to prevent material degradation when productivity slows down or stops. 600 dm3 AISI304 stainless steel process hopper and 250 m3/h ...

Plastic bag ripper An operational BRT Hartner (Schilz-O-Mat) brand device for tearing, emptying plastic bags and transferring their contents by conveyor belt. The design makes it possible to tear and empty waste bags of different sizes without disturbing their contents. The machine underwent a major overhaul in 2016 (year of manufacture 1998).

C.M.S ATOM 5-axis machining center The model is the 36/18 PX5 ATOM 5 axes 16-tool loader Year 2016 This is a machine for machining soft materials (machinable board, foam) 7426h More information on request ... más información

Side weld bag making machine SUMMIT PLASTIC MACHINERY. TECHNICAL SPECIFICATIONS: ________________________________________ • Welding Width: 700 mm • Bag Length (Max): 750 mm • Bag Length (Min): 75 mm • Cycles Per Minute: 200 U/min • Drive: Servo • Number Of Lanes: 1 OTHER SPECIFICATIONS: ________________________________________ Materials: LDPE, HDPE, MDPE; LLDPE and recycled Welding width min.-max. (mm): 75 - 700 Material thickness min.-max. (mm): 0,008 - 0,1 Antistatic device Water cooling of the welding knife Air support for films: Power transformer with 2kW capacity Hole punching device: No. Voltage: 380 V Triphase Frequency: 50 Hz

Bag making machine Garbage bag roller with tape on roll Coemter (Spain) Bag width 400-650mm. Up to 8 rolls/min. Speed ​​up to 60m/min or up to 60m/min. Weld width 1000mm ... más información

almost new tire grabber and inexpensive loader can be sold separately, possibly together loader + tire gripper machine ... más información

Press mould Cover body 28mm, 5 punches need to be replaced, 30% mold wear ... más información

BWU 1100 (2015) BWU 1100(2017) Max air pressure: 600 kPa Euroline – optimized for in- or off-line garbage bag production • Basic converting line for garbage bag production including a non driven C-folder • In- or Offline configuration – with or without surface unwind • Flexible unit, easy to operate and maintain • Servo driven • A combination of well proven FAS Converting units • Sealing from two sides with single sealing bars • Unique tensionless sealing system • Optional equipped with – PP-insert and TU220 tape unit Information taken from the documentation online (also attached to this listing) Master roll max diameter, mm [in]: 800 [31.5] Web width sealing max, mm [in]: 1060 [41.7] Bag length, min-max, mm [in]: 600-3000 [23.6-118] Machine speed, m/min [fpm]]: 20-100 [65.6-328] C-folding, mm [in]: 220-620 [8.7-24.4] Cycles/min, max : 160 W ...

Mixer for plastics CONBOPLAS SRL8002000754 The mixer combines hot and cold mixing. After hot mixing, the material automatically enters the cold mixer for mechanical cooling. - hot tank 800 l. - cooling tank 2000 l. - hot mixing time from 6 to 10 min. - cooling time from 10 to 15 minutes. - engine power 110 kW The device is adapted to the production of WPC terrace boards. Components needed for the product such as PVC and wood dust or MDF dust can be combined.

The SMT- Rotary high frequency welding machine is made up of 3 modules: 1- PRESS. It is operated by a hydraulic cylinder (SH) or by a pneumatic cylinder (SN). 2-OSCILLATOR. It provides stabilized frequency 27,12 +- 0,6 % Mhz. with its corresponding power supply and rectification. 3- CONTROL CABINET. It gives access, by means of an external panel, to the power, time, high voltage and force controls. The dimensions of this machine are HEIGHT: 1730 mm WIDTH: 900mm DEPTH: 1420mm Features Of Model Aem-smt-n 10 Kw Output Power: 10kw Frequency: 27.12 Mhz. Ia Max: 2.5 A. Ig On Load: 1 A. Welding Area: 20000 Mm2. Mains Power: 17.5 Kva. Press Force: 10kn. (The welding surface is understood to be distributed with electrodes of 3mm. wide and with good quality plastics of 0.3mm. thick. For plastics of thickness less than 0,3mm. the welding decreases).

Plastic recycling machine YEI Model: VDN-V100 Screw diameter : 100 mm LD ratio: 30 Screw rpm: 0-150 Main motor: 125 HP , 90 kW Cutter compactor motor: 75 HP, 55 kW Degassing : Two zones with water based vacuum pump Screen changer: Hydraulic, with 2 cylinders, non-stop machine running design Pelletizer: Die-face type by water Cenrifuge: Vertical type Feeding conveyor with metal detector Max. output: LDPE 380 kg/h, HDPE 360 kg/h, PP 330 kg/h

The foam molding line was in working order. Not used for several years ... más información

Pre-expanding machine Glintstar SCM-EM-350AV Foam pellet blowing device 2000 ... más información

Roland EGX-350 engraving machine, perfectly packed, almost unused. ... más información

Two stage mixer Valtorta, type V100+RO3000 HE-V Excellent condition on frame with full remote control. There is a complete description and instruction manual. In great condition. The mixer is designed for mixing compositions for producing TPE, PVC compounds, polyethylene and polypropylene mixtures. 1000l mixer volume/3000l cooler volume.

Output capacity 65 kg/h CE certified? (YES/NO) Yes Machine manuals (YES/NO) Yes Other details: 2 PCS Processed material Granular concentrate input humidity 0,4% Output humidity 0,02% Dryer KS200 E max. 70 kg/hod.DN500 200dm3, Stirrer L700 Dryer KS150 E max. 55 kg/hod DN500 150dm3, Stirrer L600 Screw TE 63 E diameter 63 mm x 24D Gear pump Feipruef 20 CCM

For sale 3 pieces of used BECKER vacuum pumps model VTLF 2.250, they are vane, oil-free, rotary pumps, which affects their durability. The VTLF series are highly durable pumps with low operating and maintenance costs. These pumps feature long life graphite vanes and integrated air filters. Two vacuum pumps from 2018, no.: A3252574, A3252569, are used very little (perfect condition) and the third pump from 2014, no.: 2794370, has had its graphite blades replaced, so its operation does not raise any objections and does not show any vacuum losses. Detailed data in accordance with the photographs of the nameplates.

Line for extrusion of XPS polystyrene foam boards with ultra-low density 20 kg/m3 and compressive strength 250-300 kp using technology patented in Ukraine with a set of additional innovative devices. Board parameters: width up to 1200 mm, thickness up to 200 mm, length is not limited. Extruder 180/235mm L/D 28-40 manufactured by the Korean company MYUNG-IL FOAMTEC Foaming gases - CO₂, DME, HFC, HFO, propane-butane, isobutane. Pumping equipment set Capacity up to 50m3/h (1000kg/h) Weight – 60t. Line length -90m, width 6m. Power consumption – 650 kW The extruders operated for a year and a half after the plant was sold to another owner, and the rest of the time the line was in storage.