otras máquinas para el plástico usadas para la venta

Stock - No.: 1820 1 used, overhauled CUBE DICER as type Sagitta - LANCELIN BG 200 working width 200 mm drive 7,5 kW – NEW cutting tools 4 x 4 x 3 mm cube pellets incl. pneumatic infeed roller system More pelletizing equipment ex our stock Wuppertal Germany available, Ask for our most recent stock-list or visit us

Stock - No.: 1624 1 piece used strand pelletizer PREVIERO > adjustable cutting length type TA 200 NA year 1996 – partly overhauled in 2020 drive 4 kW + 0,37 kW 200 mm cutting width new control board FU controller We have more strand-pelletizers, waterring or underwater pelletizing units available ex stock Wuppertal Germany, You´re welcome to visit us. Please find our stock-list on the Homepage: plastictrading

No.: 2324 1 used strand-pelletizer Alphatec type AS-G 200 E year 2019, very good condition - lab / demo use only working width: 200 mm drive 7,5 KW – AC frequency controlled cutting rotor with hard-metal teeth pneumaticm pressure roller device Machine is ready for demo. More strand-pelletizer ex our Stock available: Scheer, Automatik, Rieter, IPS, AlphaTec, Pelltec, .. Our actual machine stock-list you can find on our Homepage: plasticotrading.de

IMMEDIATELY AVAILABLE - video link on request KA 550 CNC-DRILL CNC-controlled 3-axis sawing and drilling center for sophisticated production technology Encapsulated, compact machine - designed as a closed production island - no noise and no chips in the machine environment - large extraction connection for efficient chip extraction. (The machine is also supplied as a two-axis sawing center without drilling unit). Dimensionally accurate 90° saw cuts both in small series and in large series production. CNC control based on Windows® with touch screen and color screen, simple menu-driven programming with symbols, remote maintenance module. Absolutely burr-free precision sawing of all materials such as - various plastics such as PVC and polyamide - GRP (glass fibre reinforced plastics) - aluminium - bronze - wood - copper - brass and . Drilling (through holes and blin ...

Year: 2007 - technically efficient, ready to work - after full service - flow limitation: 0.2 mm - maximum welding dimension: 2400 mm - support arms  ... más información

Clamping plates: 850 x 1250 mm - Fastening of the tools via T-slots Stroke of the upper Clamping plate: 400 mm max. Opening width: 800 mm max. Tool installation height: 400 mm min. Table height: 1080 mm Clamping force: 400 kN Opening force: 480 kN Beam angle: 85° top plate Tilt range Frame: From 0° to 90°, hydraulic Plate rotation range: From -90° to +90°, manual Travel cylinder: 1 PARKER travel cylinder Force elements: 2 power elements with clamping jaws, mounted at the front Mould weight above: approx. 400 kg max. Total mould weight: approx. 1000 kg max. Valve Control: Black/White Valves for Travel Cylinders and Power Elements Core Pull Control: Without Core Pulls Hydraulic power unit: H-L 55/22 - Operating pressure max. 250 bar Control: Without control Dimensions: Mould carrier: approx. 1,600 x 1,400 x 2,000 mm (width x depth x height) Weight: appr ...

Press screw REG-MAC for drying foils and fibres, and for compacting foam (e.g. polystyrene, EPS) Drive motor 55 kw  ... más información

Rotor diameter: 500 mm Rotor width: 1200 mm kW: 30 ... más información

The plant is suitable for the agglomeration of thermoplastic films and fibers. Depending on the material, the throughput is between 500 kg – 1000 kg/h. The facility consists of: • Feed belt • Load-dependent control for the feed belt • Metal detection coil • HERBOLD granulator type SMS 45/100-H5-3 • pneumatic material transport to the storage silo Ce9vqix • Plastcompactor unit HV-70, which consists of storage silo feed auger, plastcompactor, central blower and cooling circuit • HERBOLD recutting mill type SML 45/100-S4-2 • Intensive cooling • Conveyor blower SZS II 630/200 • Screening machine • Undersize recirculation into the compactor silo • Material conveying type MFT with big bag station and automatic diverter to the on-site silo • Automatic exhaust air filter • Electrical circuit •Compressor.

Bag machine TS 800 for side seam products from RHS Elektrotechnik (Stiegler) Conversion of servo technology 2017/2018 by RHS Working width 150 mm – 750 mm Throughput max. 50 m/min., 50 – 150 cycles/min. 2 single hole beams/6 mm Feed 70mm – 250 mm, single-lane unwinding  ... más información

Bag machine U 1100 for side seam products from RHS Elektrotechnik (Stiegler) Conversion of servo technology in 2013 by RHS Working width 300 mm – 1100 mm, Throughput max. 70 m/min., 20 – 200 cycles/min., 3 single hole beams/6 mm Feed 70 mm – 300 mm, single-lane unwinding  ... más información

Used three-station slat banding machine by KURZ model LS101. New 1998. Allows trimming of three sides of the profile in one pass.  ... más información

- technically efficient, ready to work - after full service  ... más información

Vertical Bevel-Cutting Machine Manufacturer: Hyma Model: VSL.A.75 Manually operated roller table with aluminium covered table-too Hand-wheel operated rest-plate with ratchet mechanism for repetitive cutting of same width: 0-130mm Inclinable cutting section with four dynamic balance blade-wheels, each suspended between two adjustable bearings Motorised angle-adjustment for cutting section: +/- 60 degrees. Electric blade drive motor Twister double-edge ground bank knife for cutting in forward and reverse movement of roller table Blade tension control with indication lamp and automatic cut-off on blade slackness and breakage Manually height-adjustable blade guard and fine-adjustable blade guide rollers above and below table Friction grinding apparatus with two adjustable cupstones Electrical control box mounted on table front, adjacent to operator Standard dimensions: Cuttin ...

Slitter Slitter cutting width 750 MM Knife length: 750 mm Mounted on a table (table dim. 1000 x 900 mm) 2 hands control (safety matter)  ... más información

This haul-off machine, manufactured by Battenfeld Extrusionstechnik GmbH, is in the machine storage of Plastima Used Machinery. The machine, a model Haul-Off R630/6V, dates from the year 1990. Make: Battenfeld Extrusionstechnik GmbH Model: Haul-Off R630/6V Year of manufacture: 1990 Voltage: 380 V Power: 4,5 kW Pipe diameter max: 110 mm to 630 mm

PVC - heating / cooling mixing combination Hot mixer 750 ltr. / Cooling mixer 2,500 l. Engine power: 212 + 45 kW  ... más información

- technically efficient, ready to work - chiselling up + down - place for the milling head  ... más información

- technically efficient, ready to work – after full service - 6 spindles - automatic - variable angle lower spindles - spindle top 90 degrees  ... más información

WITH COUNTING STATION M. No.: 3.65-00001 Wiring Diagram No.: 8.62-00001 Equipment / Additional information: Consists of: -Infeed conveyor -Machine -Counting station -Discharge belt  ... más información