Fabricante:
(Categoría: 605)
A Texcheh pre-needle feed and an Oskar Dilo needle feed are available. Pre-needle chair: Working width: 2400mm. Needle loom Oskar Dilo NFZ22D, year of manufacture: 1967, working width: 2500mm. Including feeding belt Ilo, dimensions X/Y: 3500mm/2500mm. On-site inspection is possible. ... más información
A textile cleaning system for cleaning, stretching and drying textiles using indirect steam heating is available. Including washing padder, dancer with one deflection, stenter frame with inlet area (approx. 4m). Working width: 2500mm, dancer height: 2500mm, housing dimensions: 5000mm/3000mm/3000mm. On-site inspection is possible.
A production line for the manufacture of decorative felts is available. Working width: 2400mm, box feeder dimensions: approx. 1000mm x 2400mm x 5000mm. Including weighing device, double reel spool, 5 pairs of worker rollers, cross belt transfer unit, spinning card and compensating stacker. On-site inspection is possible.
Max. material width: 2000mm, control: Kinco. Including rewinder and pneumatic tensioning device. On-site inspection is possible. ... más información
A production line for the manufacture of decorative felts is available. Working width: 2400mm, case dimensions: approx. 2400mm/1000mm/50mm. Including weighing device, double reel spool, 5 worker-turning pairs, cross-belt transfer device, spinning card, compensating stacker. On-site inspection is possible.
Various textile machines are available. 1) Finishtex decatizing machine, built in 1956, has a working width of 2000mm, saturated steam of 12bar, dimensions X/Y/Z of approx. 3100mm/3900mm/2800mm and a weight of approx. 2000kg. 2) Calender with heating plate press Küsters, built in 1993, has a working height of 2400mm, compressed air of 6bar with gas-heated thermal oil, dimensions X/Y/Z of 6700mm/2800mm/4000mm and a weight of approx. 16000kg. 3) James Bailey trough press, built in 1998, has a working width of 2150mm, saturated steam of 12bar, dimensions X/Y/Z of approx. 4500mm/4700mm/2900mm and a weight of approx. 7000kg. 4) Heuer singeing machine, built in 1993, has a working width of 2400mm, dimensions X/Y/Z of approx. 8300mm/3400mm/4000mm and a weight of approx. 2500kg. It includes an edge-controlled unwinding block, edge control and metal detector. 5) Shearing machine Fred. Mathonet, ...
Two dryers and a drying cabinet are available. 1) Famatex dryer with multi-deck frame, year of construction: 1961, min./max. working width: 1100mm/2200mm, max. capacity: 15m/min, saturated steam: 10bar, dimensions X/Y/Z: approx. 25000mm/6100mm/5200mm. 2) Dryer Artos with deck frame, year of construction: 1981, min./max. working width: 950mm/2350mm, max. capacity: 12m/min, saturated steam: 12bar, dimensions X/Y/Z: approx. 21000mm/5000mm/5000mm. 3) Mohr drying cabinet, year of manufacture: 1973, number of drying trolleys/drying baskets: 5/28, saturated steam: 12bar, dimensions X/Y/Z: 2100mm/1600mm/3400mm, weight: approx. 3200kg. On-site inspection is possible.
Various fiber processing machines are available. 1) Suchy edge trimmer, year of manufacture: 2011, working width: 2640mm, output: 12m/min, dimensions X/Y/Z: approx. 5500mm/3700mm/3000mm, weight: approx. 2700kg. 2) Stummer mixing chamber, year of construction: 2011, belt width: 2800mm, capacity: approx. 500kg-600kg, dimensions X/Y/Z: approx. 11000mm/4200mm/3700mm, weight: approx. 3500kg. 3) 2x filling chutes Stummer over 2 floors for carded feed box, year of construction: 2011, belt width: approx. 2000mm, dimensions X/Y/Z 1st/2nd floor: approx. 1400mm/2600mm/1700mm & 900mm/2400mm/3400mm. 4) Fiber cutting machine (guillotine) Autefa on wheels, year of construction: 1986, working width: 500mm, dimensions X/Y/Z: approx. 6600mm/1400mm/1400mm. 5) Mix-Master Temafa, year of construction: 1988, working width: 3450mm, capacity: approx. 500kg/h, capacity: approx. 1200kg-1700kg, dimensions X/Y/Z: a ...
Various machines are available. 1) Oil separator (exhaust air vacuum pump) Keller Lufttechnik, year of construction: 2018, connected load: 3kW, dimensions X/Y/Z: approx. 2400mm/2200mm/3000mm. 2) Two melting units on the same frame, year of construction: 2011, container volume: approx. 83l each, dimensions X/Y/Z: approx. 1300mm/800mm/1300mm. 3) Stummer melting tank, year of construction: 2017, working width: 1000mm, capacity: approx. 150kg/h, dimensions X/Y/Z: 2200mm/1500mm/3200mm. 4) Carding suction system with two vacuum pumps, year of construction: 1972, capacity: 1840m³/h at 60% vacuum, dimensions X/Y/Z: approx. 3800mm/1800mm/2000mm, weight: approx. 1900kg. Pumps were overhauled in 2009. An on-site inspection is possible.
One needle machine and one sewing machine are available. The Heuer needling machine, built in 1990, has a working width of 2500 mm and works with 2-board needle technology from above and 4000 needles/m. The dimensions of the machine are approx. 14000 mm x 5500 mm x 3400 mm. The overlock sewing machine Dohle (in-house conversion) Rapid 2SST, built in 2002, has dimensions of approx. 1200 mm x 1100 mm x 1400 mm. Documentation is available. On-site inspection is possible.
Sewing speed: 6000mm/min, stitch length: 4mm-15mm, stitch type: double chain stitch (type 401), min. needle distance: 6mm, workpiece width min./max. Needle distance: 6mm, workpiece width min./max.: 200mm/1200mm, material thickness: 3mm-20mm, dimensions X/Y/Z: 9300mm/4100mm/2800, weight: approx. 10000kg. Documentation available.
Max. working width: 1800mm, heating capacity: 111kW, controls: Siemens SIMATIC 5, length: 22,000mm, height: 4500mm, with bobbin carriage, unwinding station, fabric storage, rotating frame, platform, support frame, vibrating conveyor chute, spreading roller, feed rollers, scattering machine, powder conveyor, IR emitter, pyrometer, calender unit, ascending batch winder, cross-cutting device, other elements and accessories, including extensive documentation, suitable for all web-shaped materials such as foams, non-wovens, textiles, paper, etc., open coatings can also be made, i.e. coatings with powder/adhesive that can be reactivated later, e.g. preparation for thermoformed parts, stiffening nonwovens can also be produced, such as those used to reinforce shirt and jacket collars, on-site inspection is possible, the machine was completely overhauled around ten years ago and has not been used ...
Load: 300-1500kg, weight: 1.43t, an inspection is possible. ... más información
Max. roll diameter: 400mm, height: 1753mm, documentation available. ... más información
Workpiece width: 3200mm, max. force: 555kN, line force: 150N/mm, including Küsters floating roller (S-roller), 1x Raculan, 1x steel roller, on-site inspection is possible. ... más información
Working width: 1200-2350mm, with Coating Machine JAKOB WEIß, six 1500kWh burner, was overhauled in 2007. ... más información
Circular cut diameter: 40-1000mm, max. cutting depth: 40mm, machine was scarcely used. ... más información
Working width: 2600mm, with functional software, controls and documentation, without spare parts. ... más información
Needle system: 134-35 LR, needle size: 110-150Nm, max. sewing speed: 2800/min, max. stitch length: 8mm, stitch type: 301 (Lockstitch), max. clearance under the sewing foot: 14mm, clear workspace: 270x115mm. ... más información
There are 4x wide and ribbon dyers and 2x bleaching vats available. Wide and rope dyers: 2x Goller, year of construction: early 70s, working width: 1950mm, saturated steam: 10bar, use of fresh and soft water: yes, dimensions X/Y/Z: approx. 3200mm/1900mm/3300mm. 2x unknown, year of construction: Early 70s, working width: 1450mm/2450mm, dimensions X/Y/Z: approx. 2700mm/2200mm/3200mm, saturated steam: 10bar, fresh and soft water utilization: yes. Bleaching vats: 2x unknown, year of manufacture: 1970, working width: 2300mm, saturated steam: 10bar, fresh and soft water utilization: yes, dimensions X/Y/Z: approx. 3500mm/2500mm/2500mm. On-site inspection is possible.