Fabricante:
(Categoría: 605)
1 PIMATEX ready made garment dyeing machine type MTP050, year 2005, capacity up to 50 Kg, drum diameter 120 cm, drum depth 85 cm, drum volume 960 L, drum with 3 compartments, with sampling device, with 8 add vats, equipped with AREL type ATC 304+ dye cycle controller, exterior heat exchanger and pump, machine fully LENZE and ABB inverter controlled
1 FLAINOX ready made garment dyeing machine type ARC 20, year 2000, capacity up to 20 Kg, drum diameter 84 cm, drum depth 112 cm, drum volume 620 L, equipped with TERMOELETTRONICA type CT82 dye cycle controller, liquor ratio 1:8 with partial immersion and 1:18 with total immersion, working temperature 98ºC, machine works in dyeing at 2 to 20 rpm, machine works in centrifugation at 200 rpm, inverter controlled drum
1 HORST KIND label cut and fold machine type ECO 2015, year 2014 ... más información
1 HORST KIND label cut and fold machine type UNI 2000 E year 1988 ... más información
2 LORIS BELLINI high temp high temperature vertical cone/bobbin dyeing machines type RBNV 1280/975, year 2001, capacity 150 Kg each machine, both machines can run individually or coupled (total 300 Kg per batch), autoclave diameter 1280 mm, delivered with total: 4 carriers with 22 swords each, each word has a useful loading height 850 mm, 2 carrier for bumps or loose stock inside diameter 1200 mm and core diameter 300 mm and useful height 800 mm, each machine add vessel capacity 800L with mixer
1 LORIS BELLINI high temp high temperature vertical cone/bobbin dyeing machine type RBNV 1280/975, year 1990, capacity 150 Kg, autoclave diameter 1280 mm, delivered with: 1 carrier with 22 swords, each word has a useful loading height 850 mm, 1 carrier for bumps or loose stock inside diameter 1200 mm and core diameter 300 mm and useful height 800 mm, add vessel with mixer
1 LORIS BELLINI high temp high temperature vertical cone/bobbin dyeing machine type RBNV 840/975, year 1998, capacity 40 Kg, autoclave diameter 840 mm, delivered with: 2 carriers with 8 swords each, each word has a useful loading height 850 mm, 1 carrier for bumps or loose stock inside diameter 750 mm and core diameter 300 mm and useful height 800 mm, add vessel with mixer
2 LORIS BELLINI high temp high temperature vertical cone/bobbin dyeing machine type RBNV 550/975, year 2001 and 1989, capacity each 20 Kg, autoclave diameter 550 mm, The 2 machines are delivered with total 2 bobbin carriers with 4 swords each, each word has a useful loading height 975 mm, add vessel on each machine, the 2 machines share the same electrical cabinet which was supplied by LORIS BELLINI in 2001
1 LORIS BELLINI high temp high temperature vertical cone/bobbin dyeing machine type RBNV 270/975, year 2001, capacity 5 Kg per batch, autoclave diameter 270 mm, delivered with 1 carrier with 1 sword, sword useful loading height 975 mm, add vessel ... más información
1 IMPERIA pinking machine type E800 (Zigzag cutting), knife width 830 mm, working width up to 800 mm, machine equipped with precise hand lever feed mechanism, serrated knife with 5 mm gauge, with security light guards, 3 x 380 V, 50 Hz, 2.2 kW machine with setting for 2 pattern dimensions (normally supplied with 1 only), machine delivered with total 2 knifes: 1 knife installed with gauge 5 mm, 1 knife spare 5 mm gauge, machine delivered with 2 new cutting boards (one to be used and one as spare)
1 POLYTEX pinking machine type ZP (Zigzag cutting), knife width 1020 mm, stroke up to 65 mm height, up to 50 cuts per minute, machine equipped with precise hand lever feed mechanism, serrated knife with 5 mm gauge serrations, with FASNACHT security light guards, with laser cut indicator, motor power 2,2 kW, 3 x 380 V, 50 Hz, machine in immaculate condition as you can observe in the attached pictures.
1 KAPPA pinking machine type 41L, cutting width 410 mm, machine supplied with 3 cutting knives: 1 serrated knife with 4 mm gauge serration installed, 1 serrated knife with 4 mm gauge serration spare, 1 flat straight knife, table size 900 mm x 435 mm, manual actuation ... más información
1 POLYTEX pinking machine type ZO-30, cutting width 300 mm, machine supplied with 2 cutting knives: 1 new serrated knife with 4 mm serration gauge, 1 flat straight knife table size 605 mm x 315 mm, manual actuation ... más información
technical details: - Thermal press for printing textiles (T-shirt, caps, towels, carrier bags, etc.) - Contact surface: 38 x 38 cm - Power: 1,750 W - Voltage: 230 V - Current: 7.5 A - Frequency: 50/60 Hz Shipping is of course possible. Shipping is plus freight and packaging costs, depending on size and weight. (Changes and errors regarding technical data and prices excepted!) In accordance with our terms and conditions, we would like to point out once again that cheques and bills of exchange cannot be accepted.
modern 3-fold transport machine with servo motor 220 volts and thread cutter ... más información
1999 Gerber spreading cutting machine textile Gerber spreading machine Gerber textile cutting ... más información
1992 LECTRA VT5000 in Germany Our LECTRA VT5000 is from 1992. It was fully updated 2004 and we bought it 2013. We have also the CAD pattern and layout programs as well the digitable. ... más información
1 KAPPA pinking machine type 105 S knife width 1040 mm, serration gauge 4 mm machine equipped with precise hand lever feed mechanism, with laser cut indicator, motor power 3 kW, 3 x 380 V, 50 Hz, Machine with setting for 2 pattern dimensions (normally supplied with 1 only), machine delivered with 2 new cutting boards (one to be used and one as spare), with installed cutting knife plus spare cutting knife Machine in pristine condition. It was bought for a project and was never really used. Delivered secured on it's wooden crate