sierras usadas para la venta

cutting diameter: 260 mmsaw band length: . mmcutting width: . mmweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... más información

Horizontal Band Saw Machine Fabr. KASTO Type HBA 340 AU Specifications: Cutting range 90° round 340 mm Cutting area 90° flat 340 x 380 mm Saw blade length 5334 x 32 x 1.06 mm Table height 700 mm Feed length 600 mm Multiple feed 1800 mm infinitely variable cutting speed 20 - 130 m/min. Drive power 6.5 kW External dimensions L x W x H approx. 2200 x 2600 x 2000 mm Weight approx. 2.1 t with-chip conveyor used, in good condition All information to the best of our knowledge but without guarantee until the order confirmation The machine can be demonstrated at the site near Aachen.

Band saw Prvomajska HAP280 Maximum cutting diameter: 280 mm The possibility of working in a machine Total power: approximately 4 kW Tape dimensions: 3660x25x0.9mm Weight: approx. 1500 kg Dimensions (length / width / height): 2000 mm / 2000 mm / 2000 mm ... más información

Make: Omes Type: Tramatic 370S Year of construction: 1988 Saw blade diameter: 350 mm Features of this machine are: -mechanical pneumatic Vice -hydropneumatic feed can be adjusted (see Control Panel) -Saw process and open the Vice manually or automatically -After reaching the depth of saw the saw head will return automatically to its basic position Saw capacity - 90 ° degree cut -Diameter of 130 mm -100 x 100 mm rectangular tube -Fermentation cuts adjustable - right-hand and left-hand fermentation, if necessary in a voltage Machine has been little used

Internal hole diameter: 304mm, compressed air supply: 7.2bar. ... más información

Max. workpiece diameter square/ round/ rectangular: 400/ 250/ 340x340mm. ... más información

really well maintained, equipped with simple CNC control. Saw blade diameter 400 mm This section at 90 ° round 130 mm rectangle 240 x 85 mm flat 180 x 70 mm in MITRE at 45 ° profiles Portrait 120 x 55 mm Feed length with double lifting device to 2 cutting speeds 10/20 m / min. Speed infinitely variable 0-1000 mm / min. Drive motor 400 V, 1.7/2,6 kW Weight 1350 kg Dimensions W x D x H 2750 x 1500 x 1900 mm Accessories: Spray cooling device "Mini pos 807", Blade, roller conveyor, manual.

cutting diameter: 250 mmsaw band length: 3505 x 32 x 0,95 mmcutting width: mmControl: total power requirement: 8 kVAweight of the machine ca.: 1,2 tdimensions of the machine ca.: 1937 x 1850 x 1570 mmNC-controlled band saw machine for series cuts with differentlengths and quantities for all materials.Technical data:Cutting capacityCutting diameter 250 mmBelt speed 24 - 90 m/min. - steplessSaw band dimensions 3505 x 32 x 0.95 mmBelt drive 3.7 kWTable height 550 mmEquipment:Chip conveyorCoolant deviceRunwayOperation manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 350 mmcutting diameter: 115 mmcapacity 90 degrees: flat: 200 x 80 mmturning speeds: 1700/3400 U/minsaw-blade dia.: 350 x 3,3 x 40 mmmotor: 400 Volttotal power requirement: 1,8/2,6 kWweight: ca. 600 kgrange L-W-H: 1000 x 850 x 1500 mmFurnishing:- semi-automatic ALU circular saw- pneumatic material clamping- Stepless adjustment of the saw head lowering speed- Machine table with miter adjustment- Machine baseThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 380 mmcutting diameter: 120 mmcapacity 90 degrees: square: 90 x 90 mmcapacity 45 degrees: round: 110 mmcapacity 45 degrees: square: 80 x 80 mmturning speeds: 2.800 U/minvoltage: 400 Vcompressed air: 7,0 bartotal power requirement: 3,0 kWweight: 220 kg Current new price, with accessories ~ 12.000 eurosFurnishing :- Versatile use for aluminum and plastic profiles- Swivel range 0°-45° stepless to the left and right- Detents at 15°, 30° and 45°- Stable, polished, continuous support table- with precisely mounted rotary table- Wear-free and quiet multiple V-belt drive- saw blade- Hydropneumatic saw feed- 2-hand operation- Machine with stand- Pneumatic profile clamping device (2x horizontal, 1x vertical) Special accessories included:- 1x ELUMATEC feed roller conveyor- 1x ELUMATEC discharge roller conveyor, with stop & magnifying glassThe data for this ad was created wit ...

cutting diameter: 260 mmserial number: 109967 volt: 380 Vfrequency: 50 Hzweight of the machine ca.: 500 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... más información

cutting diameter: 420 mmsaw band length: 6300 mmtable height: 700 mm0: 5,5 kWcutting speed: 20-130 m/minmin. cut-off length: 6 mmmin. dia.: 10 mmweight of the machine ca.: 2,9 tdimensions of the machine ca.: 2,4x3,3x2,4 mFully automatic band saw, saw band tension hydraulic, cutting feed continuously variable, material feed hydraulic, automatic feed with horizontal vice. Clamping force: approx. 400-2000 daNCoolant supply via three coolant nozzles, approx. 135 l, approx. 30 l/min.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Fully hydraulic high-performance band saw in the heaviest design, with horizontal parallel movable saw blade, for cutting profiles, tubes and solid material in all Qualities, including material that is extremely difficult to machine (e.g. Titan, Inconel, Hastelloy) Guidance of the sawing unit via two vertical square columns with hardened and ground guide rails. Hydraulic band saw clamping and hydraulically pre-tensioned Carbide band saw guides. The material is clamped by two hydraulic clamping vices. The feed length can be adjusted by means of a counter with a resolution of 0.1 mm. The material is fed via a hydraulic cylinder and ensures maximum cutting accuracy. The machine is easy to operate and is fully automatic. max. material diameter 420 mm max. feed single 6300 x 41 mm Multiple feed 9,999 mm smallest diameter to be sawn 10 mm Shortest remnant length in automatic ...

Eisele LMS 1 Speed 4000 rpm 380 V 16 A Untested without plug Swivel table Vice  ... más información

saw blade diameter: 350 mmcapacity 90 degrees: round: 115 mmcapacity 90 degrees: square: 95 mm: 180 x 95 mmWorking height: 925 mmsaw blade turning speeds: 15+30+45+90 U/mintotal power requirement: 1,8/2,6 kWweight of the machine ca.: 0,41 tdimensions of the machine ca.: 0,8 x 1,0 x 1,85 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Metal band saw, band saw machine, band saw, vertical band saw, horizontal band saw, hydr. Horizontal band saw machine, semi-automatic, band saw machine, horizontal band saw machine -Handover in the current condition, as inspected -Control defective, control not complete -Manufacturer: Behringer, horizontal band saw Band saw machine type HBP 530-1100G -Saw drive: Dietz 7.5 kW -Cutting data: cutting width with scaffolding 530 mm, convertible to 1100 mm -Cutting capacity flat: 90° 1100 x 500 mm / 45° 700 x 500 mm -Cutting capacity round: 90° 530 mm / 45° 500 mm -Saw band speed: steplessly adjustable -Saw band: approx. 8800 mm -Hydraulic unit: Elmot / Bosch 11kW / 140 bar -Coolant device: -Dimensions saw: 2200/4790/H2600 mm -Dimensions pump/control panel: 1020/700/H940 mm / 800/850/H1410 mm -Weight: kg

Ref.-No. 00764 Designation of the plant: Spare parts machine, saw To hobbyists Manufacturer: Wassmer Spezialmaschinen GmbH Model FBM 06 Year of construction: 1989 Volt 380 Frequency 50 Week 47 Ampere 125 Plant is sold as a spare parts machine A circuit board would probably have to be replaced – system currently not under function

cutting diameter: 280 mmband length: 450 mmcapacity 90 degrees: square: 240 x 240 mmcapacity 90 degrees: flat: 280 x 160 mmcapacity 45 degrees: round: 180 mmdimensions of saw-blade: 450x40x2,0 mmengine output: 2,6 kWheight of material-table: 500 mmweight of the machine ca.: 495 kgrange L-W-H: 1500 x 600 x 1340 mmFurnishing:- stepless hydraulic lowering- manual vice- Miter adjustment ü. vice- coolant deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 270 mmsaw band length: 3660 mmcutting width: 0.85 mmcutting speed: 20-95 m/mintotal power requirement: 2 PSweight of the machine ca.: 1.1 tdimensions of the machine ca.: 200x170x145 cm x cm x cmSaw blades: 6 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Saw blade length/width: 8400mm/50mm. Documentation available. On-site inspection is possible. ... más información