- A. MEIER (1)
- ABAKUS (1)
- ABAWERK (1)
- Adixen (2)
- AERMEC (1)
- AERO-LIFT (1)
- AERZEN (1)
- AGROTOP (1)
- AIR LIQUIDE (1)
- AIRFLEX (1)
- AIRPEL (1)
- ALFA LAVAL (1)
- ALFA-LAVAL (1)
- ALLWEILER (1)
- ALTRONIC (1)
- AMADA (3)
- AMF PANEL (1)
- AMK (2)
- AMOT (2)
- ANGELANTONI (1)
- ANHUI ZHONGKE OPTIC- (1)
- ANYCUBIC (1)
- APC (1)
- APV (1)
- ARI (1)
- ARP (1)
- ARZUFFI (1)
- ASSFALG (3)
- ASTROFAN (1)
- ASUS (1)
- AT (2)
- ATEC (1)
- ATLAS COPCO (1)
- ATOM (1)
- AVK (1)
- AVOCENT (1)
- BAC (1)
- BACHER (1)
- BANK (1)
- BARTELS (1)
- BARTH (4)
- BAS (1)
- BAUER (11)
- BAYERN TOOLS (5)
- BBC (1)
- BEHR (1)
- BERGER (1)
- BERNARDO (1)
- BESSEY (2)
- BETTER PACKAGES (1)
- BIG (6)
- Bito (2)
- BLOKSMA (1)
- BLUE CLEAN (1)
- BOC Edwards (2)
- BOEKELS (1)
- BOFA (6)
- BOLL + KIRCH (1)
- BORG WARNER (1)
- BOSCH (8)
- BOSCH REXROTH (1)
- BOSCHERT (2)
- BRAZILIAN SHIPYARDS (1)
- BRIWATECH (2)
- BRIXO (1)
- BRUGMAN (1)
- BRYAN DONKIN RMG (1)
- BUDERUS (1)
- BURGENER (1)
- BUSCH (1)
- BWB (1)
- BÜCHEL (1)
- BÖLLHOFF (1)
- CA-02 (1)
- CALAMIT (1)
- CAME (1)
- CAMPER (1)
- CANNON AFROS (2)
- Capstone (2)
- CAR JACK (1)
- CASADEI (1)
- CASE TECH (1)
- CATERPILLAR (1)
- CBRAILLON (1)
- CCD (1)
- CIVIEMME (1)
- CODEMA SYSTEMS (1)
- Cold Jet (2)
- COMAC (1)
- CONCEPT LASER (1)
- CONEMASTER (1)
- CONTEC (1)
- CTS (1)
- CUSTOM MADE (1)
- DAF (1)
- DAIKIN (1)
- DANFOSS (1)
- DANOBAT (1)
- DATACOLOR (1)
- DBK DAVID+BAADER (1)
- ... más
Fabricante:
(Categoría: 2500)
Año de construcción: 1996
usado
This FINN POWER TP2515I/21/AM Punching machine was manufactured in the year 1996. It is equipped with a Siemens SINUMERIK System 3 control unit. The machine has a punching force of 300 kN. ... más información
Año de construcción: 1997
usado
1 aseptic Elopak filling machine line No E 5 suitable for ESL milk, UHT milk and fruit and Vegetable juice bottling. set at the moment for 3 formats Int. No.B 5, Series No. 453 Manufacturer: SHIKOKU-KAKOKI LTD Type: U-680A Year of construction 2007 with 3-lane run-off section Capacity 10,500 U/h Conveyor belts for individual packaging are manufactured by Polyketting BV Series No. 121614; Year of construction 2013 3 Elopak screw cap gluers a.) Type: PLA-S30 Manufacturer Elopak Inc. Year of construction 2005 Ref. 22111 b.) Type: PLA-S30 Manufacturer Elopak Inc. Year of construction 2007 Ref. 22121 c.) Type: PLA-S30 Manufacturer Elopak Inc. Year of construction 2007 Ref. 22122 d.) Individual packaging connection transport system from the Elopak filling machine to the 3 screw caps Gluing ma ...
Año de construcción: 1997
nuevo
10000 liters diesel storage tank, tested as new. ... más información
Año de construcción: 1997
usado
Available in stock 1 x Used Saer Electropump KF / 2. The equipment is used but in good working conditions. H: 55 - 5 m RPM: 2850 RPM Flow: 0.6 - 3.6 m3/h Voltage: 220 V Frequency: 50 Hz Horsepower: 0.75 HP / 0.55 KW ... más información
Año de construcción: 1997
usado
Available in stock 1 x Used Westfalia Lub. Oil Separator, model OSA 20-96-066. The unit was installed in a HFO power plant that stopped operating. The equipment is used but in good working conditions. Note: We also have some original parts from GEA Westfalia to sell. If you are looking for something in particular, please contact us and we will see if we have anything in stock.
Año de construcción: 1997
usado
This SIHN ring piece was manufactured in the year 1997. 10 units available. ... más información
Año de construcción: 1997
usado
550 € Description: Turntable diameter approx. ,1500 mm Wrapping height ,approx. 2000 mmApprox. Onsite Dimension. (l x w x h): 3,000 x 1,500 x 1,000 mm, weight approx.: 715 kg ... más información
Año de construcción: 1998
usado
Available in stock 1 x Used Bryan Donkin RMG Gas Pressure Regulator RMG-BD226 (FIG 226 ZSO-ECL). Designed primarily for control of fuel feeds to industrial and commercial burners, heater units, boilers and other items of equipment where an accurate, safe and reliable controlled pressure is required. We also have other elements of the gas train available, namely: 1 x Ball Valve DN65 PN16 with pressure switch 2 x Solenoid Valves DN65 PN16 1 x Gas Filter DN65 PN16 The equipment is used but in good working conditions. Outlet Pressure Range: -3 mbar to 3 mbar Maximum Inlet Pressure: 0.1 bar DN 65 PN 16
Año de construcción: 1998
usado
Kadia 2PH 60/350 T Vertical Honing machine was manufactured in the year 1998 in Germany. It is equipped with a KADIA UCP 1500 control unit. The machine has a spindle speed of 1400 rpm. ... más información
Año de construcción: 1998
usado
This KOMAGE Mechanical Powder Press was manufactured in the year 1998 in Germany by the Komage Gellner Maschinenfabrik GmbH. It has a pressing force of 50 kN. The machine is in a good condition for its age as serviced on an annual basis directly by Komage. ... más información
Año de construcción: 1998
usado
275 € Description: Mains voltage 3 x 400 V, nominal voltage 3 x 200 V, current: 3 x 29 A, power: 10,000 VA 50 / 60 Hz - IP 20, according to VDE 0552Approx. Onsite Dimension. (l x w x h): 800 x 600 x 400 mm, weight approx.: 20 kg ... más información
Año de construcción: 1999
usado
2.800 € Description: Chiller MONTAIR Srl Serial number : 976999 Voltage : 400 V Power : 51,5 Kw Intensity : 126 Amp Refrigerant R-407/ Max load 63 Kg Max. working pressure : 24,5 Bar Approx. Onsite Dimension. (l x w x h): 3,400 x 2,200 x 2,016 mm, weight approx.: 2,600 kg ... más información
Año de construcción: 1999
usado
An original control cabinet that was dismantled by PAAL Konti 125D, built in 1999. It is based on SIEMENS S5 controller. A complete control cabinet, functional ... más información
Año de construcción: 1999
usado
40 € Description: • Digital scale • Serial number 6007884 1999 • Capacity 300 kg • Minimum weight 5 kg • Resolution 100 gApprox. Onsite Dimension. (l x w x h): 600 x 600 x 150 mm, weight approx.: 50 kg ... más información
Año de construcción: 1999
usado
50 € Description: Voltage 230 V , Power 2400 W, maximum 2760 WApprox. Onsite Dimension. (l x w x h): 1,000 x 1,000 x 1,300 mm, weight approx.: 20 kg ... más información
Año de construcción: 1999
usado
Fixing plate, magnetic table pair for sale. It can be attached with screws to an injection molding machine, machine tool or elsewhere. This allows an injection mold or other iron with a maximum size of 245x230 mm to be attached. ... más información
Año de construcción: 1999
usado
- Power supply ES 030-10 - Ulbrichtkugel ISP 80 - Built in 1999 - fully functional - Visit possible by appointment ... más información
Año de construcción: 1999
usado
Punching machines like the INDUMASCH HP 750 CNC/Z from 1999 are integral for operations requiring precise and forceful metal work. This model, known for its robust construction with a weight of 3240 kg, ensures reliable performance. The machines capabilities are suitable for various industrial applications where punching precision is critical. If youâre considering upgrading your metal fabrication operations, the INDUMASCH HP 750 CNC/Z we have for sale could enhance your production efficiency. Contact us for more information about this punching machine.
Año de construcción: 1999
usado
Available in stock 2 x Used RMG Solenoid Gas Valves DN65 PN16, model 01-EVA 25 NH-4. We also have other elements of the gas train available, namely: 1 x Ball Valve DN65 PN16 with pressure switch 1 x Gas Filter DN65 PN16 1 x Gas Pressure Regulator DN65 PN16 The equipment is used but in good working conditions. VDC: 24 Power: 70 W Maximum Inlet Pressure: 0.1 bar Environment Temperature: -20ºC to +60ºC
Año de construcción: 2000
usado
COLD JET DRY ICE BLASTING MACHINE COLD JET MODEL 2000 DRY ICE BLASTER GOOD CONDITION EXWORKS HAMBURG GERMANY VOLTS 230 AMPS 4 PHASE 1 FREQUENCY 50/60 FULL LOAD AMPS 4 MOTOR AMPS 2.5 HP 1 SHORT CIRCUIT INTERUPTING CAPACITY 300A MAX OPERATING PRESSURE 300 PSI / 20.7 BAR SHIPPING WEIGHT 315 LB / 143 KGS