- A. MEIER (1)
- ABAKUS (1)
- ABAWERK (1)
- Adixen (2)
- AERMEC (1)
- AERO-LIFT (1)
- AERZEN (1)
- AGROTOP (1)
- AIR LIQUIDE (1)
- AIRFLEX (1)
- AIRPEL (1)
- ALFA LAVAL (1)
- ALFA-LAVAL (1)
- ALLWEILER (1)
- ALTREX (1)
- ALTRONIC (1)
- AMADA (3)
- AMF PANEL (1)
- AMK (2)
- AMOT (2)
- ANGELANTONI (1)
- ANYCUBIC (1)
- APC (1)
- APV (1)
- ARI (1)
- ARNO (1)
- ARP (1)
- ARZUFFI (1)
- ASSFALG (3)
- ASTROFAN (1)
- ASUS (1)
- AT (2)
- ATEC (1)
- ATOM (1)
- AVK (1)
- AVOCENT (1)
- BAC (1)
- BACHER (1)
- BANK (1)
- BARTELS (1)
- BAS (1)
- BAUER (11)
- BAYERN TOOLS (5)
- BBC (1)
- BEHR (1)
- BERGER (1)
- BERNARDO (1)
- BESSEY (1)
- BETTER PACKAGES (1)
- BIG (7)
- Bito (2)
- BLACK STEEL (1)
- BLUE CLEAN (1)
- BOC Edwards (2)
- BOEKELS (1)
- BOFA (6)
- BOLL + KIRCH (1)
- BORG WARNER (1)
- BOSCH (7)
- BOSCH REXROTH (1)
- BOSCHERT (2)
- BOTECH (1)
- BRAZILIAN SHIPYARDS (1)
- BRIWATECH (2)
- BRUGMAN (1)
- BRYAN DONKIN RMG (1)
- BUDERUS (1)
- BURGENER (1)
- BUSCH (1)
- BWB (1)
- BWF (3)
- BÜCHEL (1)
- BÖLLHOFF (1)
- CA-02 (1)
- CALAMIT (1)
- CAME (1)
- CAMFIL (1)
- CAMPER (1)
- CANNON AFROS (2)
- Capstone (2)
- CASADEI (1)
- CASE TECH (1)
- CATERPILLAR (1)
- CBRAILLON (1)
- CODEMA SYSTEMS (1)
- Cold Jet (2)
- COMAC (1)
- CONCEPT LASER (1)
- CONEMASTER (1)
- CONTEC (1)
- CTS (2)
- CUSTOM MADE (1)
- DAEWOO (4)
- DAIKIN (1)
- DANFOSS (1)
- DANOBAT (1)
- DATACOLOR (1)
- DBK DAVID+BAADER (1)
- DEGUSSA (1)
- Dehoust (2)
- ... más
Fabricante:
(Categoría: 2500)
Año de construcción: 2007
usado
The device was mainly used as a demonstration device (commercial agency). That's why it only has 107 working hours. After a general overhaul in 2020 (1400 €) only 1 use. 400V 32A; 70 liter tank (thus full operation 3.5 hours); Steam temp. 165° or 195° C; working pressure: 6.5 or 9.5 bar. For better use, the steam hose and control cable have been extended. In addition: 1 surface cleaner, special cleaning agent approx. 30 litres
Año de construcción: 2007
usado
90 € Description: Gas Nailer Serial number 084390 Nail lengh max 39 mm Nail Ø 3.0 / 2.6 mmApprox. Onsite Dimension. (l x w x h): 560 x 450 x 200 mm, weight approx.: 8 kg ... más información
Año de construcción: 2007
usado
Metalref boiler Model BRIK FIRE at wooden wastes Max operating temperature 90° Potential yield 78,000 Kcal/h Outbreak potential 95,000 Kcal/h Main fuel Chips/Sawdust Complete with automatic hydraulic feeder ... más información
Año de construcción: 2007
usado
This DÃRR ECOCLEAN 70c washer machine was built in the year 2007 and has 38472 production hours. ... más información
Año de construcción: 2007
usado
This ILLIG SB 74E-9 vacuum forming and punching machine for plastics was made in the year 2007 in Germany. The machine has a working area of 505 x 775 mm. ... más información
Año de construcción: 2007
usado
This Jeti 3300 Industrial Printer was manufactured in the year 2007 in Canada. The machine has a psi of 100-150 min-max. ... más información
Año de construcción: 2007
usado
450 € Description: Disc diameter 1500 mm With access rampApprox. Onsite Dimension. (l x w x h): 3,900 x 1,600 x 800 mm, weight approx.: 400 kg ... más información
Año de construcción: 2007
usado
This Durma RP9 1250x20 punching machine was made in the year 2007 in Turkey. It is equipped with a Siemens 840 control unit. The machine has a punching force of 200 kN. Set of tools included. ... más información
Año de construcción: 2007
usado
This HACO PM 310V-3 Punching machine was manufactured in the year 2007 in Belgium. It is equipped with a TPC 50 Graphics control unit. ... más información
Año de construcción: 2007
usado
This Trumpf Trupunch 5000 Punching machine was manufactured in the year 2007. It is equipped with a Trumpf control unit. The machine has a punching force of 220 kN. ... más información
Año de construcción: 2008
usado
Dissolution Tester for testing the release of active ingredients from drugs. Incl. UV/VIS Spectrometer PerkinElmer. ... más información
Año de construcción: 2008
usado
Description: The foaming machine described below is designed for foaming sandwich elements. PRODUCT Panels for cold rooms DIMENSIONS Length x width max. 2,400 x 1,350 mm min. 600 x 180 mm Thickness: 40 ... 120 mm CAPACITY Press type: 2 + 2 Press table dimensions: 6,500 x 1,600 mm Number of press tables: 4 pieces , Occupancy of press table: 1 piece Extension of pressing tables: 60 sec Curing time / dwell time in the press: 15 - 45 min Occupancy rate: 0.9 Shifts: 2 pieces , Working time per shift: 8 h Panels per shift: 48/72 pieces Depending on foam thickness and raw material GROUND DATA (this set-up) Mixing ratio: 100 : 140 (polyol : isocyanate) Dosage - max: 1100 g/s per mixing head Specific gravity: Polyol 1.0 Isocyanate 1,2 Density: 45 - 60 kg/mÑ Start time: 20 sec (Other raw material data can of course be used for other applications) SYSTEM COMPONENTS Components of the ...
Año de construcción: 2008
usado
50 € Description: Article number: 0701 138 X Rated power: 1200 WApprox. Onsite Dimension. (l x w x h): 800 x 500 x 1,300 mm, weight approx.: 20 kg ... más información
Año de construcción: 2008
usado
500 € Description: Volume flow: 320 m³/h Max. static pressure: 21000 PA Rated current: 5.2A Control voltage: 230 V Supply voltage: 230 V Motor power: 1.2 kW Approx. Onsite Dimension. (l x w x h): 600 x 400 x 770 mm, weight approx.: 76 kg ... más información
Año de construcción: 2008
usado
Description: Manual monorail system , Pneumatic switch points 2x jib crane with lifting capacity 250 kg incl. GIS electric chain hoist 4x travelling crane with lifting capacity 250 kg incl. GIS electric chain hoist 4x drop section Floor area: approx. 65 x 30 metres Structure height: approx. 4.5 metres Approx. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 1 kg
Año de construcción: 2008
usado
13x QUAY/DRY DOCK FENDERS (PNEUMATIC TYPE) Total Quantity: 13 pieces Approx Size: D1.5ML2.75M Other items included: Chains and shackles (Not all have chains and shackles) Please note: This lot is subject to a buyer's surcharge of 10%, VAT might be applicable, and is sold subject to award. Type QUAY/DRY DOCK FENDERS Year 2008
Año de construcción: 2008
usado
1.750 € Description: KW / A: 13.5 Heater: 19,56 with control cabinet , Appliance dimensions: (LxWxH): 600 x 720 x 1500 mm Control cabinet dimensions: (LxWxH): 600 x 200 x 760 mmApprox. Onsite Dimension. (l x w x h): 2,000 x 2,000 x 1,500 mm, weight approx.: 260 kg ... más información
Año de construcción: 2008
usado
Vibration machine for drying and sieving of sand. The machine consists of a welded construction mounted on conveyor elements, with 2 Electric Vibrators as drive. An electric heater with built-in blower is located at the end of the conveyor belt. Below the conveyor trough a sieve box is mounted in the area of the sand outlet. The dynamic forces that are emitted from the machine to the ground only about 100 N amount due the shock mount on the spring elements. The amplitude and therefore the flow rate can be set by adjusting the unbalances on the motors. The machine is due to the simple design nearly stör - and maintenance-free. The static frequency converter has a range of 10 to 32 Hz Length: 3.5 m Width: 1.2 m Height: 1.4 m Weight: 220kg
Año de construcción: 2009
usado
Atec stainless alginator serial: C10030 - 02 2009, 70Kg, digital timers and temperatures, high shear mixer, electrically heated, on stainless mobile skid ... más información
Año de construcción: 2009
usado
Qty. 1 Second-hand laser tube wall thickness measurement unit Mfc.: MSG Maschinenbau GmbH Built: 2009 Determination of wall thickness using laser technology. Max. loupe dia.: 85 mm (can be modified) Wall thickness: 11 – 14 mm Loupe length: 250 – 600 mm Operation speed: 1.3 m/sec. Power: 6.5 kW, 400 V, 21 Amps., 50 Hz Air pressure: 6.0 bar Scope of supply: Removal device Feeder Saw inlet channel Vertical drivers Vertical & horizontal straightener Heavy-duty metal circular saw Blow-out and suction device Weighing device (calculation) Catchments Loupe crane Suction unit Hydraulic aggregat Collection stand