extrusoras usadas para la venta

Mixing and granulating line with twin screw extruder 2CV.70.HT/41D. PP, PA6, EPDM. Screw diameter 63, length 2800. Strand granulation, storage silo, turbo mixer, 4 weighing dispensers, injection molding machine, laboratory single screw machine. Lots of different equipment. ... más información

TMS 65mm blown film extruder, complete with frame and new screw scale to be assembled, ABB motor overhauled in September, machine stopped in November, video available in operation, pulling and collecting mm.850, production around 120 kg/h. ... más información

according to pdf attached  ... más información

according to pdf attached  ... más información

PET films were produced on the extruder, working width: 650-800mm, output: 600-700kg/h, with cooling spirals, new extruder screw, degassing system, other spare parts and documentation, without dosing system, an on-site inspection is possible. ... más información

For LDPE MDPE and BIO Web width from 600 mm up to 1600 mm Throughput rate 100/160 kg/h depending on materials Max production speed 80 Min/max thickness 30/200 my (tolerance sigma 2 +/- 8% Extruder with screw diam. 65 mm. 30 L/D MELT control Oscillating die diam. 100-200-300 mm. gap 1,4 mm. Blow Up Ratio 1,5 – 4,5 high capacity cooling ring with inverter on electric fan 7,5 kw Calibrating basket 1.000 max diam. Gusseting units Pull off unit min/max width 600_1600 mm. Stretching rollers 1.800 mm wide Corona treatment Back to back winding station type BA 2/1.800 Max reel diam. 1000 mm. N.2 slit and seal units Supporting tower height approx 9,0 mt. Construction year 2003 Excellent conditions Mounted but disconnected

Description GILDRESS ... más información

Description Corona Treatment for Cast Lines ... más información

Screw diameter 220 mm Processed material PET Flakes Drive Motor Siemens 225 kW + Simovert 6SE7 + Transmission Koellmann Unex70 Hydraulic drive dosing, hydraulic agregat Rexrorth ... más información

IBAÑEZ 175 MONOLAYER LDPE EXTRUDER HEAD It is not the complete machine, only the head. ... más información

It is 2003 model and working hours have been revised for 4 years. New screw barrel ... más información

Description Single layer blown film line Extruder diameter 105 L/D 30 Extrusion head with die 500 Dosing units DS&M Still haul off Twin winder working width 2200 ... más información

Description Single Layer Blown Film Line Material: LDPE and COMPOSTABLE Film working width: 600 / 1.600 mm. Die diametter: 100-200-300 mm. – air gap=1,4 - Blow Up Ratio (BUR) =1,5-4,5 Film thickness: 30 / 200 μ Thickness tollerance: sigma 2 ± 8% Production: 100 / 160 kg/h (with ambient temperature at 25° C) the flow rate can vary according to the thickness of the film, the width of the tube and the type of raw materials used Maximum production speed: 80 m/min Finished reels maximum diameter: 1000 mm Cardboard mandrels diameter: 3" (internal diameter) Twin winder type BA-2/1800 Line total height: 9 m

Year: 2003, low working hours, in good condition Availability: immediately. Current condition: can be viewed in operation. Screw: 60, L/D ratio: 35, Capacity: 120-140 kg/h, Material force feeding screw: available, Degassing system: available, Cutting head type: head cutter, air cooled. Material suitable for processing: PE/PP/PS. Humidity max 3 % Equipment: Foil silo, capacity 2 m3, Vacuum pump for degassing, Temperature control box, Pressure control, Air cooling, conveying, Venturi, cyclone and pipes... Dimensions: 6,40 m length x 2,10 m width x 4,30 m height Installed power: 30 Kw.

Screw Diameter: 60 mm // Throughput: 250 kg/h ... más información

Screw Diameter: 72 mm // Throughput: 180 kg/h ... más información

pressure: 100 tchamfer lenght: 3000 mmdistance between columns: 2700 mmControl: AMADA AMNC II-PC throat: 415 mmstroke: 200 mmdayligth: 500 mmadjustment of the rear stops: 600 mmtable width: 60 mmnumber of controlled axis: 7 ajustment speed: 200 mm/secbending speed: 20 mm/sectotal power requirement: 5,3 kWweight of the machine ca.: 6,7 tdimensions of the machine ca.: mIncludes:-Matrix holder for 1V matrices, pluggable, total height with holder: 140mm-Status indicator light-5-axis backgauge with stop sensor systemFolding robot: ASTRO-100 NTIncludes:-Standard gripper-Reposition gripper on the upper press beam-Regripping support for large workpieces - pneumatically drivenTechnical data see PDF attachment.Handling robot: ASTRO-MP20Includes:-Loading table with spreading magnets-Vacuum gripper Medium and Large-Combi gripper (suction/gripping) for vertical loading-Device for vertical loading of ...

AMUT TWIN SCREW EXTRUDER FOR PIPES/PROFILES, Type BA92/22, constructed in 2004, parallel counter-rotating screws diam. 92 mm 22L/D, new screws and barrel, used for PVC window profiles, D.c. 59,5 kW drive, including 2 volumetric dosing units ... más información

TECNOVA EXTRUSION LINE 130 mm.500 kg/h, PE PP PC PS ABS PET PA, Including:, Scrap silo, Extraction auger, Crammed feeder, Extruder with 130 mm screw diam.37 L/D, N. 1 vacuum degassing pump, 225 kw drive, Semi-automatic non stop screen-changer with screens diam.250 mm., Available with a [FIMIC RAS 400](https://www.germanplast.eu/listings/5241333-used-2007-fimic-ras-4 00-automatic-screenchanger), Water ring pelletizer, Drying centrifuge, Pneumatic extraction for granulate, Constructed in 2004, not working from 2010, Offered reconditioned (various steps to be agreed upon), (see how we recondition on our WHAT WE DO page on top)

Twin Screw Extruder Metalchem 2T9/4,5 for PCV, Made by Metalchem out-put 100 kg/h  ... más información