Fabricante:
(Categoría: 103)
Travel X/Y/Z: 1270mm/660mm/610mm, max. spindle speed: 15000rpm, feed X/Y/Z in mm/min: 15200/15200/15200. table load (uniform): 1360kg, dimensions X/Y/Z: approx. 4900mm/4600mm/3000mm, weight: approx. 10000kg. On-site inspection is possible. ... más información
Travel X/Y/Z: 400mm/400mm/400mm, spindle speed: 40-4000rpm, quill stroke: 80mm. Table size: 710mm x 460mm. Dimensions X/Y/Z: 4100mm/4200mm/2000mm, weight: 1900kg. Documentation available. On-site inspection is possible. ... más información
Travel X/Y/Z: 600mm/400mm/400mm, rapid traverse X/Y/Z: 3/2.5/2.5m/min, spindle speed: 8000rpm. Table dimensions X/Y: approx. 1150mm/250mm, dimensions X/Y/Z: approx. 2100mm/3000mm/1900mm, weight: approx. 2100kg. Machine switches on, but shows an error message. An inspection is possible. ... más información
Travel X/Y/Z: 800mm/690mm/630mm, max. spindle speed: 15000 rpm, drilling capacity: 30mm. Table size X/Y: 630mm/630mm, max. workpiece weight: 1100kg, control: Siemens Sinumerik. Dimensions X/Y/Z: 6000mm/2900mm/2400mm, weight: approx. 25000kg. Spare parts available. Including chip conveyor and separate coolant system.
Travel X/Y/Z: 630mm/500mm/500mm, max. spindle feed X/Y/Z: 24m/min, max. cutting feed rate: 12m/min. Max. Spindle speed: 8000rpm, table dimensions X/Y: 800mm/500mm. Tool holder: ISO40, tool capacity: 24, max. tool weight: 6kg, max. tool diameter/length: 100mm/300mm, tool change time: 3.6s. Control: Heidenhain TNC 426M, operating hours: 12100h, dimensions X/Y/Z: approx. 2600mm/2400mm/2600mm, weight: approx. 4500kg. Documentation available.
Travel X/Y/Z: 1050mm/530mm/630mm, rapid traverse X/Y/Z: 24m/min, max. spindle speed: 10000rpm, max. tool diameter/length: 90mm/300mm, max. tool weight: 7kg, tool storage: 30, tool holder: ISO40. Table dimensions X/Y: 1150mm/560mm, max. table load: 700kg. Dimensions X/Y/Z: approx. 4300mm x 2300mm x 2600mm, weight: approx. 7800kg. Including suction, 10.00 spindle, IKZ (stronger pump installed). Noises on the spindle, probably caused by ball bearing damage.
Travel X/Y: 500 mm/200mm, max. speed: 4000 rpm. Max. Workpiece weight: 60kg, max. workpiece diameter/length: 225mm/20mm, table dimensions X/Y: 600mm/200mm. Dimensions X/Y/Z: 2800mm/2850mm/1650mm, weight: 1800kg. Loose contact on the magnet, machine is used with a sine table. ... más información
Travel X/Y/Z: 850mm/500mm/450mm, speed range: 35-18000rpm with 18 steps, table dimensions X/Y: 1250mm/400mm. Control: Heidenhain TNC355, tool holder: SK40, weight: approx. 5500kg. Including an assortment of tools. Documentation available. ... más información
Working range: 1000mm/355mm, table size: 1400mm/250mm, spindle: SK50, digital display: Mitutoyo. ... más información
A Fluri milling machine with 360° rotating table is available. Travel X/Y/Z: 1200mm/700mm/300mm, max. speed: 2000rpm, table dimensions: 120mm/720mm. Accessories included. On-site inspection is possible. ... más información
Control system: CNC532, axes: 3, operating hours: 19565h, travel X/Y/Z: 600mm/400mm/500mm. ... más información
Spindle speed range: 9000rpm, travel X/Y/Z: 500mm/400mm/400mm, feed rate: 10000mm/min, rapid traverse: 12m/min. Table dimensions X/Y: 700mm/500mm, max. table load: 200kg, number of T-slots: 7, distance between T-slots: 63mm. Control: Heidenhain, tool changer: 16-fold, dimensions X/Y/Z: 4000mm/2200mm/2450mm, weight: approx. 3500kg.
Travel X/Y: 1300mm/800 mm, speed: 1000rpm, main spindle diameter: 70mm, horizontal stroke of drilling spindle: 420mm, max. distance spindle-table: 1900mm, number of feeds: 9, range of feeds: 0.05 - 2mm/rev, rapid traverse: 2400mm/min. Table dimensions X/Y: 990mm/670mm, dimensions X/Y/Z: approx. 3600mm/2400mm/2400mm, weight: 6200kg. Documentation available. On-site inspection is possible.
x-travel: 420 mmy-travel: 200 mmz-travel: 330 mmspindle taper: SK 40 table load: 200 kgcarrier height until: 16: 11,2 - 355 mm/min.spindle turning speed range: 16: 56 - 1800 U/mintable surface area: 710 x 315 mmDimensions (L/W/H): 1,6 x 1,3 x 2 mtotal power requirement: 2,2 kWweight of the machine ca.: 1,3 tdimensions of the machine ca.: 1,6 x 1,3 x 2 mCondition: ready for operation: Electric 380 Volt: 3-axis digital readout: Fagor Cooling pump in machine base: Machinefeets: Additional adjustment of the traverse increases the working area of the machine! Ball screws in the x + y axis, automatic feeds in all 3 directions.Dealer with own stock of 2500 m².The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel:1000 mmy-travel:320 mmz-travel:400 mmTable dimensions:1000 x 400 mm ... más información
adjustment drive of the grinding spind.slide:0,0025 - 0,05 mmtotal power requirement:100 kWadjustment of grinding head slide:150 mmweight of the machine ca.:17 tgrinding spindle drive:2 x 37 kWgrinding width:30-150 mmperipheral speed:34 m/secworkpiece speeds:60 - 300 mm/Sek.grinding height:70 mmgrinding wheel diameter:750 mmgrinding tools:750 x 75 x 350 mmgrinding wheel turning speeds:870 U/Min.max. workpiece diameter:250 mm
x-travel:1200 mmy-travel:800 mmz-travel:550 mmdistance spindle center to table:150-700 mmdistance between columns:920 mmtable-size:1320x800 mmtable load:2000 kgT-slot (width-distance-quantity):14x120x7 mmspindle taper:HSK-A 63/HSK-E 50 spindle speed:15000 (opt. 24000/36000) U/minspindle drive:7.5/11 (opt. 30/39; 20/26 kWSpindle motor torque:47.7/70 (opt. 29.1/37.8; 10.4/13.5) N.m.rapid traverse in x-y-z axis:30000 (opt. 40000) mm/minCutting feed rate X/Y/Z axis:1~10000 (opt.1~20000) mm/minTool changer:20 (opt. 24) max. tool diameter:100/130 (opt. 80/130) mmmax. tool length:300 (opt. 220) mmmax. tool weight:8 (opt. 4) kgtotal power requirement:30 (opt. 80) kvaWeight approx.:12 tMachine size (LxWxH):5026x4276x3210 mmpositioning accuracy:0,014 mmrepeating accuracy:0,008 mmCNC controller:Siemens/Fanuc/Mitsubishi/Heidenhain automatic tool changer:20/24 linear scales:Heidenhain/Fagor tool mea ...
x-travel:1600 mmy-travel:1300 mmz-travel:700 mmdistance spindle center to table:200-900 (opt. 225-925/250-950) mmdistance between columns:1500 mmtable-size:1800 x 1300 mmtable load:4000 kgT-slot (width-distance-quantity):22x160x8 mmspindle taper:HSK-A 63/HSK-E 50 spindle speed:15000 (opt. 24000/36000) U/minspindle drive:15/18,5 (opt. 25/33 od. 20/26) kWSpindle motor torque:95/118 (opt. 72.6/95.8; 10,4/13,5 N.m.rapid traverse in x-y-z axis:30000 (opt. 40000) mm/minCutting feed rate X/Y/Z axis:1~20000 mm/minTool changer:20 (opt. 24) max. tool diameter:100/130 (opt. 80/130) mmmax. tool length:300 (opt. 220) mmmax. tool weight:8 (opt. 4) kgtotal power requirement:60 (opt. 80) kvaWeight approx.:22 tMachine size (LxWxH):5026x4276x3210 mmpositioning accuracy:0,014 mmrepeating accuracy:0,008 mmCNC controller:Siemens/Fanuc/Mitsubishi/Heidenhain automatic tool changer:20/24 chip conveyor with ch ...
-Table: approx. Ø 500 mm; -Spindle speed: 72 to 190 rpm. ... más información