1 Gebr. Mat Cutting Machine Reinforced design up to single rod 12 mm Passage width 3 m Weight 645 kg  ... más información

2 used hydr. Tilting tables = 1 tilting table: Scarf size: - Length 12 m - Width 3.56 m - Parapet height on one side: 0.13 m 2 Tilting table: Scarf size: Length 11 m Width 3.56 m - Parapet height on one side: 0.23 m both with: incl. hydraulic ram incl. vibrator Surface on both tables good condition with signs of wear. Both tables have heating coils for hot water

Complete plant for the production of L bricks and wall panelsMould list : 7 pieces of wall panel formwork 12 cm Pos. 1 Masonry panel formwork 550 / 800 x 490 mm Number of wall panels : 12 pieces 550 x 490 mm 12 pieces 550 x 490 mm Pos. 2 Masonry panel formwork 550 x 990 mm Number of wall panels : 16 pieces 550 x 990 mm Pos. 3 Masonry panel formwork 800 x 990 mm Number of wall panels : 16 pieces 800 x 990 mm Pos. 4 Masonry panel formwork 1050 x 990 mm Number of wall panels : 16 pieces 1050 x 990 mm Pos. 5 Masonry panel formwork 1300 / 1550 x 990 mm Number of wall panels : 8 pieces 1300 x 990 mm 8 pieces 1550 x 990 mm Pos. 6 Masonry panel formwork 1050 / 1300 x 490 mm Number of wall panels : 8 pieces 1050 x 490 mm  ...

2 used mortar silos made by Wachter/ Maxit - Capacity approx. 20 tons - Total height approx. 6 m - Ø 2.40 m - Screw conveyor, mixing cabinet and vibrator  ... más información

Pruning shears made by Reppel type TU 20-6 = - Weight: approx. 4.0 to -Sheet width/ sheet thickness 6mm  ... más información

5 used tilting tables = Formwork width: 2.85 m Scarf length: 12 m Parapet height: 0.23 m Steel Surfaces Condition: Good The load capacity per square meter is 550 kg, walls up to a thickness of 24 cm were made. Incl. heating coils for hot water, incl. 4 hydr. Stamp  ... más información

One used automatic stirrup bender from SCHNELL, model Bar Wiser 22. Bi-directional automatic stirrup bender from bar for the production of stirrups and cut-to-size bars using wires up to Ø 22 mm (#7) . Driven by electric servomotors . Bar Wiser 22N stirrup benders are equipped with: 12.000mm bench Max. pulling speed: 120 m/min (400 ft/min)

Mixing plant EKATO (for anhydrite screed, milk of lime and other media) Stainless steel mixer in 6 m container. , 80-122 RPM. Control Schoregge GmbH complete Control, balance, etc. Mass of the mixer: diameter: 1, 60 m, height: 0, 80m, volume: 1,600 l ... más información

Dismantled CONCRETE PLANT Easy to operate and ready relocation. Horizontal concrete plant type «ROME CZ 5P24B» with a capacity of 65 m3 / h of fresh concrete or 45 m3 integrated vibrated concrete with additional equipment + heating system ACV. The concrete unit consists of units: - storage boxes for gravel 5 units 150m3/unit (galvanized version), - vibration system, mounted on two outlet cones each consisting of a 260 W vibrator mounted on a special plate with all the necessary electrical equipment - scale for gravel, 4 units, maximum load capacity 2400 kg, 12m3 geometric volume each, vibrator 180 W - scale for cement, maximum load capacity 600 kg, 3 units weighing cells, EC certificate, volume of the bunker 480 L, pneumatic hood fi 323 mm, pneumatic vibrator VPC 1 piece - compressor and pneumatic equipment, volume 270 L, air flow 462 l/min, compressor 3 kW - planetary  ...

Mat bending machine Hambi TV 30 V = reinforced design, up to single rod 12 mm, Passage width: 3 meters, Weight: 645 kg  ... más información

One used METAX cutting line from Peddinhaus for bars up to 40mm  ... más información

MIXING PLANT -Tower system made by Krupp, built in 1969 -Control engineering, originally from Pfister Waagen Augsburg -Current control from Dorner Electronic – Dorner Control -Mixer THZ 3000 (Teka) year of manufacture 1980 MIXING PLANT -Tower complex Manufacturer Krupp, Year of production 1969 -Control construction Manufacturer originally Comp. Pfister Waagen -Control Dorner Electronic - Dorner Control -Mixer THZ 3000 (Teka) Year of production 1980

BFS SOUVERAEN Complete Concrete Pipe Plant DN 300 - DN 3600. Plant is from 2003. and is in very good condition The complete plant onsist of two production lines. DN 300 mm - DN 1200 mm, fully automatic Packerhead technology, and one double station semi automated for pipes up to 3600 mm and box culverts. Vibration technology. The package includes: 2 Steel cage machines, 5 Fork lifts, Tilter for box culverts, 2 Robotic handlers, overhead crane and a complete batching plant. The plant can be seen after appointment. The plant was shut down in 2018.. (Video clip is available) Amexpo Consult, Merkurvej 31, 9370 Hals Denmark Mobile: +45 29251017.

General Fully automated concrete pipe factory. Pipes are produced with self compacting concrete (‘wet cast’) which makes the operation labour friendly (low noise and no vibration) and gives state of the art products: every pipe has exactly the size, with a flat surface and is very easy to install by constructors. Video`s is available upon request. Plant can be seen after appointment, Amexpo Consult Merkurvej 31, 9370 Hals Denmark +45 29251017

One used good as new SCHNELL AUTOMATIC BAR SHAPING MACHINE BAR WISER 28 Bi-directional automatic bar shaping machine from bar, with 2 bending heads for the production of shaped wires and cut-to-size bars using wires up to Ø 28 mm (#8). Driven by digital electric servomotors. Bar Wiser 28 bar shaping machine is equipped with: - Max. pulling speed: 180 m/min (600 ft/min) - 2 bending units (upper and lower) - Clamp for extraction of the end part of the bar - Virtual mandrel - Web teleassistance

1 used concrete bucket, make summer - Built in 2020, but unused - Content: 1.5 cbm volume concrete measure = - Dimensions L: 2.10 m - W: 1.40 m - H: 1.85 m Outlet: = with vibrator on the hose outlet nozzle  ... más información

Hydraulically operated tilting vibration table for products up to 5 m. long. Type v20 vibrators max speed 6000rpm. Hydraulically operated beltfeeder. Hydraulically power packs. Pneumatically operated gates. PLC control system with monitor and memory for 100 different mould settings. Demoulding crane. Transport system consist of 2 lanes and 10 units of chain stands. PLC control system 70 steel pallets for a product area of 5000 x 1,125 mm and a load of 3500 kg. Amexpo Consult Merkurvej 31, 9370 Hals Denmark Mobile: +45 25291017.

1 Gebr. Column formwork - Twin formwork - Length of formwork 16 m - max. chamber dimension 1.00 x 1.00 m - Steel formwork - incl. 10 vibrators - incl. converter - incl. control system Formwork is hydraulically movable  ... más información

Complete packaging machine line (used) with 6 psotions Cover sheet support, horizontal strapping, vertical strapping, film winder, shrink frame, sealing head (reserve)  ... más información

Steel mould for the production of 2 concrete steps each with nominal lengths of 90cm, 100cm, 110cm and 120cm. The mould has appropriate fittings and pressure plates and must be rebuilt accordingly for each step length. Step height 18cm, tread approx. 27cm. The mould was used on a concrete block machine type Schlosser SV40.