mandrinadoras y centros de mecanizado usadas para la venta

 ... más información

Unused, manual available ... más información

 ... más información

Equipped with 4 spindle drill head ... más información

 ... más información

Description: Well-maintained PAMA Speedmat HP3 Machining Centre with Pallet and Head Changer. Control SIEMENS Sinumerik 840 D sl Working area Workpiece dimensions (Ø x h) max.: 3,000 mm x 3,200 mm , Load capacity of pallet table max.: 8,000 kg Table dimensions: 1,250 x 1250 mm Work spindle diameter: 130 mm Number of interchangeable pallets: 2 Axis travel Axis travel X-axis: 3,000 mm Axis travel Y-axis: 2,000 mm Axis travel Z-axis: 3,200 mm + W-axis max.: 800 mm Table rotation B-axis: 360 Axis speed and Power transmission Table speed (B axis) max.: 7 upm Table torque max.: 48  , Feed rate X, Y, Z axis: 0.5 - 10,000 mm/min Feed force X, Y, Z axis max.: 20,000 N Rapid traverse X, Y, Z axis: 30 m/min Spindle drive speed max.: 6,500 rpm , (the actual speed at the tool varies depending on the machining head) Angle head TS 20 Tool changer Tool holder: HSK A-100 Magazin ...

length:1400 mmwidth:1000 mmX-axis:1200 mmy-axis:1000 mmZ-axis:550 mmtool taper:HSK 63-A spindle turning speed range:100-15000 U/minYear: 1998Working time: 19185 hSpindel working time: NALast Service by Huron: 2006Power voltage: 3x400VAC ... más información

Magnetic drilling machine; Max. drilling diameter 35 mm drilling diameter; power 1600 watts; connection 230 Volt; magnet strength 16000 newtons; speed 810 rpm; drilling depth 145 mm; including oil reservoir for cooling and lubrication; belt for fall protection; Condition unused, in its original packaging

Unused, Automatic cooling system, drilling depth 210mm, adhesion force 16000 N, Speed up to N = 830 rpm, power 1600 kw, ... más información

Description: Sourced from an automotive manufacturer due to production changes Serial Number: 109303 Control: Siemens Sinumerik 840 DSL ( composed of 15 NC and 4 spindles) ,  ,Machine-specific plain text messages on screen in German language This  ,machine centre is composed as follows: , 2 Centric clamping divices Actuation: , Hydraulic Swivel table: 180º Hydraulic pressure:  ,approx max 100 bar Station 1 (front) , Spindle units: 2 SEMA spindle units type SE55 - HSK 50 for deburring Spindle Bearing inside diameter: 55 mm Sealing with barrier air and labyrinth Tool holder: HSK50 Drive power: 1,5kw at 3000 u/min Tool cooling Dry machining Drive direct via coupling Manual tool change 2 pcs. 4 spindle head for thread forming 4xm10 with IK and ABS tool holder Drive power AC servo motor, 11.0 kW Spindle speed  ,variable: ,max 3500 rpm Coolant inter ...

 ... más información

Description: Serial number: 67001 Control: Sinumerik 840D Axes: Z: 1300 mm W: 900 mm Feed speed: C: 19.200 mm/min W/Z- 5000 mm/min Rapid traverse: C: 47.600 mm/min W/Z: 10.000 mm/min Feeds: W/Z: 16 800 N Drilling method: Gun drill Bore diameter min/max: 2.5-18 mm Number of drilling spindles: 1-4 mm Drilling depth: 800 mm Spindle holder: HSK80 25x100 mm Spindle distance: 160 mm Power: 5.5 kw Spindle speed: 10.000rpm Rapid traverse: 10m/min Coolant supply per spindle: 105 bar 45 l/min Nominal spindle torque: 35 Nm Rotation: 360º Installed Power: 70kg weight approx.: 14,700 kg, Approx. Onsite Dimension. (l x w x h): 7,900 x 7,250 x 2,850 mm

Description: Control and Machine Number Control: SIEMENS Sinumerik 840 D Machine no.: 14351 Travels and Axes Travel X-axis: 1450 mm Travel Y-axis: 1100 mm Travel Z-axis: 1300 mm B - axis: NC rotary table Pallet dimensions & Pallet changer Number of pallet places: 2 , Pallet dimensions: 1000 x 800 mm Feeds & Spindle Rapid feed X,Y,Z: 60 m/min Working feed: 1- 60000 mm/min Feed force max. X|Y|Z : 20|18|20 kN Spindle speed: 20 - 6000 rpm Tools & Tool changer Tool holder: SK 50 Chip to chip time: approx. 5 sec. Tool change places: 180 General data Coolant system Chip conveyor Please have a look at the technical data in PDF format.z-motion: 1,300 mm, change time of pallets: 5 sec, x-motion: 1,450 mm, y-motion: 1,100 mm, control: SIEMENS Sinumerik 840 D, numbers of pallets: 2, taper: SK 50, toolchanger positions: 180, turning speed range: 20 - 6000 rpm, rapid motion: 60 m/min ...

Description: PDF Data Sheet attached in the 'Documents' section Machine declared with approximately 4500 working hours. Equipped with : ACE HP 5100 Evacuator, YOM 2014, 338 kg NANACON CIL1101 refrigeration unit Transformer JEIL TRANS, YOM 2014, 334 kg High pressure unit HIPRECO KHS-230/400214-00244 Not included in sale : ALLMATIC parts holder not included with sale. HEPA filter LNS not included with sale.z-motion: 750 mm, max. workpiece weight between centers: 500 kg, x-motion: 850 mm, y-motion: 700 mm, control: FANUC Series 31i-MODEL B, pallet table size: 500x500 mm, numbers of pallets: 2, taper: ISO#40, 7/24 Taper, toolchanger positions: 80, feed range: 60,000 mm/min, weight approx.: 15,000 kg, Approx. Onsite Dimension. (l x w x h): 6,500 x 4,500 x 3,000 mm

drill diameter:5,,,,40 mmdrilling length:600 mmlip angle:90-150 °total power requirement:4,5 kWweight of the machine ca.:0,8 tdimensions of the machine ca.:2-2-2 mCNC programmable according to ISOPoint angle 90-140 degrees, disc stroke x 80mm y 80mmgrinding wheel 6mm to 150mm ceramic or CBN speed 2500 to 6000 rpmGrinding options - 3 facets 6 surface grinding (Renault patent) - conical surface grinding with cross-section correction / point thinning / cross point. / Type 2/1Avyac grind / 4 faces gr. Cross for deep drill

Optimum Opti B22 Pro ... más información

Description: Serial Number: 183567 , MCR-A5CII 35x65 (5C kit) with OSP-P300M CNC Controller Travel: X-axis: 6.700 mm Y-axis: 4.100 mm Z-axis: 800 mm W-axis: 1.200 mm Table to spindle nose: 0 to 1800 mm Table Dimensions: Working Surface: 3000x6500 mm Maximum Load capacity: 37.000 kg T-Slots (width x Nº): 24 H7 x 15 Height from Machine Bottom: 950 mm Spindle Speed range: 30 to 4.000 min-1 Taper bore: 7/24 Nº 50 Bearing dia meter: Ø 100 Kit 5C Specifications Spindlehead indexing at every 1-degree (instead f STD 5-degree indexing) Extensin attachment head, L150, 6,000min-1, 26kW (for through spindle coolant system) (i/o STD Extension attachment head L150, 4,000min-1) 90-deg angular attachment head, 1-deg L355, 3,000min-1, 11kW (fr through spindle coolant system) There is Y-axis limitation (i/o STD 90-deg angular attachment, L150, 3,000min-1, 22kW) BC attachment 1º 6000 rpm T ...

Description: The DIXI DHP 80 High Precision Horizontal Machining Centre with four axes was used exclusively for the finest machining processes and has never produced rougher chips. A fresh geometric adjustment was carried out in November 2023. Control system Control system: SIEMENS Sinumerik 840D Linear axes Traverse path X/Y/Z axis: 1,200/1,100/1,100 mm , Y distance pallet to spindle (min. - max.): 40 - 1,140 mm Z distance from pallet centre to spindle (min. - max.): 230 - 1,320 mm Work feed: 0 - 10,000 mm/min Rapid traverse: 40,000 mm/min B-axis Table indexing angle min.: 0.0001° Feed rate: 0-10 rpm Max. torque (continuous, nominal torque): 1,040 - 1,828 Nm Spindle with internal coolant supply Nominal spindle motor power: 39 kW Spindle speed max.: 12,000 rpm Spindle holder: HSK A-100 Coolant supply with 70 bar and 20 l/min Automatic FASTEMS pallet changer Pallet storag ...

Description: serial no.: P014TL095 operating voltage: 400 V frequency: 50 Hz , nominal current: 17 A jib length: 380 mm , distance between table and spindle nose: min. 150 mm , distance between table and spindle nose: max. 480 mm , with ,3 slots slot width: 14H14 mm , Table height over floor: 815 mm , working spindle: , spindle bearing: 50 mm diameter , tool clamping: 2200 N , Max. tool diameter: 80 mm , Max. tool length: 250 mm , Max. feed force: , X: 2700 N , Y: 2700 N , Z: 5400 N , chiping values: , Max. milling performance: 600 cm³ Max. drill diameter: 20 mm , Max. thread diameter: M 16 , attention: without machine vices on clamping surface and without SK 30 tool holders on tool turret z-motion: 330 mm, max. workpiece weight between centers: 250 kg, x-motion: 500 mm, y-motion: 400 mm, control: FANUC SERIES  ...

x-travel:2200/3400 mmy-travel:550 mmz-travel:510 mmtotal power requirement:36,8 kWtable length:3050 mmTraverse path can be used as a whole or divided into two areas for pendulum machining.3 axisHSK 100 ... más información