mandrinadoras y centros de mecanizado usadas para la venta

x-travel:2500 mmy-travel:920 mmz-travel:820 mmtable surface area:3100X900 mmtable load:4,0 tcontrol:840 D powerline shopmill Siemensturning speeds:20-10.000 U/mintool change unit:80 Pos.rapid traverse:50 m/minspindle:(40/100%ED) 48/32 kWmax. torque on the spindle:294 /196 Nmtaper ISO:SK 50 total power requirement:100 kVAweight of the machine ca.:27 tdimensions of the machine ca.:6,40 x 3,30 x 2,85 m4 axis machining center, travelling columncontrolled milling head 1° indexing (B- axis), internal coolant supply 40bar,600l coolant box,3D touch probe,BLUM laser,chipconveyor,prepared for el. handwheel,prepared for dividing wall,prepared for NC-rotary-table appr. 36.000 h ( mainswich ON ) appr. 12.000 h (spindle ON )

 ... más información

Quality unchecked. Equipped with 4th axle! ... más información

x-travel:500 mmy-travel:450 mmz-travel:400 mmturning speeds:20 -10.000 1/mincontrol:HEIDENHAIN iTNC 530 tool change unit:60 Pos.tool taper:SK 40 rapid traverse:24 m/minspindle:13 / 9 kWRound-swivelling table:630 x 500 mmweight of the machine ca.:6,9 t5-axis simultaneously machining center,NC-round-swivelling table B -5 / +110°, C360°,direct measuring system,el. handwheel,flush gun,chipconveyor,infrared touchprobe TS 649, mode 4,DMG netservice,approx. 20.000h "machine on", approx. 6.000h "spindle on"

x-travel:700 mmy-travel:420 mmz-travel:380 mmcontrol:SIEMENS 840D tool change unit:25 fachtaper ISO:SK 30 turning speed range::10.000 1 / minrapid traverse:60 m/mindiameter of tools max.:80 mmmax. tool length:250 mmmax. tool weight:3 kgfeed power:5.000 Nchange-time chip to chip:1,5 secDimensions (L/W/H):3 x 2 x 2,6 mtotal power requirement:18 kVAweight of the machine ca.:4,1 t5 axis simultaneously milling-drilling machining center,NC-rotary-swivelling table,direct measuring system,airblast outside,el. handwheel,no internal Coolant Supply,no chipconveyor,Approx. 37.000 hours "machine on", approx. 11.600 hours "spindle on"

x-travel:800 mmy-travel:950 mmz-travel:1020 mmcontrol:HEIDENHAIN iTNC 530 table load capacity:800 kgtool taper:HSK 63 turning speeds:16.000 1/minspindle:35 / 25 kWtable-size:770 mmmax. torque on the spindle:160 / 223 Nmtool change unit:120 (2x60) Pos.weight of the machine ca.:20 tdimensions of the machine ca.:3,3 x 6,15 x 3,2 m5-axis simultaneously machining center with controlled swivel-rotary table (A/B-axis),milling head horizontal,internal coolant device (10-80bar),oilmist-suction,electromech. tool-length measuring device GROB,chipconveyor,3D touch probe,KINEMATICOPT,BLUM laser,el. handwheel,hour meter: approx. 80.500 h "machine on", approx. 48.500 h "spindle on"

Quality unchecked. ... más información

x-travel:1800 mmy-travel:2000 mmz-travel:1100 mmpallet table size:1850 mmtable turning speeds:max. 200 1/mintable load capacity:3000 kgtool taper:HSK 100 spindle drive:44 / 32 kWturning speed range - stepless:10000 1/minnumbers of positions in the tool changer:120 control:840D powerline FD shopmill classic SIEMENStransport dimensions LxWxH:6,1 x 3,4 x 3,8 mweight of the machine ca.:37 t5-axis CNC universal mill-turning center, simultaneously,NC-mill-rotary table with pallet-device dia. 1.850mm,linear pallet pool for 2 pallets,Universal milling head with controlled B-axis,mode 43D probe infrared HEIDENHAIN TS 640,BLUM-laser,internal coolant Supply 40bar, 980 l, with temperature control,internal airblast,SinTDI tooling management,TRANSMIT function,DMG netservice,flushgun,higher accuracy device,torque support for angle milling tools,tooling breakage control,chipconveyor,approx. 131.000h "ma ...

x-travel:800 mmy-travel:840 mmz-travel:865 mmtotal power requirement:24 kWweight of the machine ca.:15,5 tdimensions of the machine ca.:4 x 3 m5 axes, 1 spindle A axis -30TO + 210 DEGB axis 360 x 0.001 Axis speed: X= 65 mm/min; Y= 55mm/min; Z= 60mm/min Spindle: 29 KW max. spindle speed = 1200 rpmmax. torque = 34.6 Nm Tools:HSK-A63 87 places in the magazine

x-travel:800 mmy-travel:600 mmz-travel:500 mmturning speeds:15000 1/mintool change unit:30 tool adaptor:HSK 63 control:iTNC 530 HEIDENHAIN table load capacity:250 kgrapid traverse:30 m/minspindle drive:19 / 10 kWtotal power requirement:41 kVAweight of the machine ca.:8,5 tdimensions:3,4 x 2,7 x 2,9 m5-axis-simultaneously machining center,NC rotary- swivelling table, A-axis +-110°, C-axis 360°,rotary table Diameter D = 280 mm, side clamping plates,electronic Handwheel Heidenhain HR 410,infrared touch probe HEIDENHAIN, electronic Compensation of thermal expansion,air blast outside,air blast through spindle,flush gun,standard coolant,no internal coolant supply,chic through no chipconveyor,cabin roof,prepared for oilmist suction,approx. 25.000 h "machine on. approx. 8.000 h "spindle on"

x-travel:800 mmy-travel:840 mmz-travel:865 mmcontrol:Siemens 840 D spindle speeds::10.000 rpmspindle drive motor:20 kWweight of the machine ca.:16 tdimensions of the machine ca.:4 x 3 m4 axes, 1 spindle A axis 360 x 0.001 Axis speeds: X= 65 mm/min; Y= 55mm/min; Z= 60mm/min Spindle torque = 262 Nm Spindle 20KW / 10,000 rpm Tool HSK-A100 57 places in the magazine

Equipped with laser and extra clamp ... más información

Unused, manual available ... más información

x-travel:2600 mmy-travel:700 mmz-travel:700 mmtable surface area:2900 x 700 mmrotary table diameter:750 mmtable load:500 kgcontrol:HEIDENHAIN iTNC 640 turning speeds:20 - 15.000 1/mintaper ISO:SK 40 tool change unit:120 Pos.rapid traverse:40 m/minspindle:23,5 / 13,5 kWtotal connected load:56 kVAweight of the machine ca.:16 tdimensions of the machine ca.:6,0 x 3,4 x 3,0 m5-axis simultaneously universal machining center,installation date 6th December 2018rigid table with integrated NC-rotary table (left) and B-axis in milling head,direct measuring system,Swarf Conveyer,3D Touch probe HEIDENHAIN TS 649,el. handwheel,internal coolant supply 40 bar,Flush gun,mode 4,safety device (for power failure),ERGOLINE control 19"reading hours:approx. 25.500 h "machine on"approx. 7.500 h "program on"approx. 8.100 h "spindle on"

V.V. manual; including accessories; suitcase; unused in box ... más información

x-travel:735 mmy-travel:650 mmz-travel:560 mmRotary-table:680 mmtable load capacity:600 kgtool taper:HSK 63 spindle drive:35 / 24 kWturning speed range - stepless:18.000 1/minnumbers of positions in the tool changer:60 Pos.control:SIEMENS 840D solutionline FD operate total connected load:65 kVAtransport dimensions LxWxH:4,0 x 2,45 x 2.85 mspace requirements approx. LxWxH:5,0 x 4,0 x 3,5 mweight of the machine ca.:12 t5-axis CNC universal mill-turning center, simultaneously,NC-mill-rotary table D= 650 mmmm,rotary table 1.000 rpm,mode 4,3D probe infrared HEIDENHAIN TS 649,BLUM-laser,internal coolant Supply 40 bar , 600 l, MPC( machine protection control ), DMG netservice,flushgun 2 bar,chipconveyorapprox. 15.200h "machine on", approx. 4.900h "spindle on"

Partially dismantled ... más información

Buyer must bring chips and coolant, lot has been dismantled ... más información

:VF 108 x-travel:1080 mmy-travel:600 mmz-travel:600 mmdistance spindle center to column:630 mmdistance spindle center to table:100-700 mmtable-size:1280x600 mmtable load:1000 kgT-slot (width-distance-quantity):18x100x5 mmspindle nose:A63 HSKspindle speed max.:15000 U/minspindle drive:7,5/27 kWmax. torque on the spindle:55/100 Nmrapid traverse in x-y-z axis:36/36/24 m/minmilling feed range:1-10.000 mm/minTool changer:24 fachmax. tool length:300 mmmax. tool weight:8 kgmax. tool diameter:80|130 mmpositioning accuracy:+/- 0,01 mmrepeating accuracy:+/- 0,008 mmtotal power requirement:30 kWMachine size (LxWxH):4920x3510x2970 mmweight of the machine ca.:7,25 tBrand-new CNC vertical machining center with CNC control FANUC or HEIDENHAINWarranty: 12 monthsMore information can be found in the Appendix.

x-travel:600 mmy-travel:580 mmz-travel:530 mmdistance spindle center to column:630 mmdistance spindle center to table:100-600 mmmilling feed range:1-10.000 mm/minmax. table load:200/100 kgmax. tool weight:8 kgpositioning accuracy:+/- 0,01 mm:8000/15000 1/minspindle drive:7,5/11,5 /5,5 kWrepeating accuracy:+/- 0,008 mmweight of the machine ca.:7,4 / 7,65 tBrand-new CNC vertical machining center with CNC control FANUC or HEIDENHAINWarranty: 12 monthsMore information can be found in the Appendix.