Fabricante:
(Categoría: 101)
x-travel:650 mmy-travel:600 mmz-travel:500 mmrotary table::630 PW800 mmtable load:600 kgspindle turning speed range:18.000 1/mindrive capacity - spindle motor:15 / 10 kWcontrol:SIEMENS 840D shopmill feed speeds infinitely variable:1 - 30.000 mm/minrapid traverse:45 m/minTool changer:189 (32+157) Pos.spindle taper ISO:HSK A-63 weight of the machine ca.:9,5 ttotal power requirement:43 kVA5-axis simultaneously universal-machining center,with NC-rotary-swivelling-table A-axis +30/-115° (25 1/min), C-axis 360° (65 1/min),internal coolant supply 80bar, 1.000 l,airblast through spindle,cabin roof manually,3D touch probe RENISHAW,chipconveyor,el. compensation of thermal expansion SIN,3D toolradius-correction SIN,el. handwheel,BLUM laser,flushgun,oilmist suction,wiper for spindle head,swarf-flushing Z-slide,approx. 23.000 h "spindle on", last spindle change at 13.400h
x-travel:700 mmy-travel:700 mmz-travel:700 mmturning speeds:18.000 1/minmax. torque on the spindle:110 / 84 Nmtool taper:SK 40 control:HEIDENHAIN iTNC 530 tool change unit:180 fachsize of pallet:500 x 500 mm mmmax. workpiece weight:600 kgspindle:34 / 28 kWrapid traverse:60 m/mintotal power requirement:68 kVAweight of the machine ca.:10,5 tdimensions of the machine ca.:9,5 x 7,5 x 3,4 mdimensions for transport:4,3 x 2,4 x 2,6 mhorizontal machining center with linear drives,,NC-roundtable,pallet pool RS 10 for totally 12 pallets,monitor for workpiece setting-up device,high pressure coolant through spindle 40bar,internal air blast supply,mode 4,hydraulic clamping 2/4 for workpiece setting-up device and working table,BLUM laser,oilmist suction,3D touch probe TS 649,tool-breackage control, mechanical,SDS spindle diagnosis system,flush gun,el. handwheel,chipconveyor,approx. 112.000 h "machine ...
Quality unchecked. Positions on changer: 40 ... más información
Magnetic drilling machine; Max. drilling diameter 35 mm drilling diameter; power 1600 watts; connection 230 Volt; magnet strength 16000 newtons; speed 810 rpm; drilling depth 145 mm; including oil reservoir for cooling and lubrication; belt for fall protection; Condition unused, in its original packaging
x-travel:650 mmy-travel:600 mmz-travel:500 mmrotary table::280 PW 160 mmtable load:300 kgspindle turning speed range:18.000 1/mindrive capacity - spindle motor:15 / 10 kWcontrol:SIEMENS 840D shopmill feed speeds infinitely variable:1 - 30.000 mm/minrapid traverse:45 m/minTool changer:119 (32+87) Pos.spindle taper ISO:HSK A-63 weight of the machine ca.:9,5 ttotal power requirement:41 kVA5-axis simultaneously universal-machining center,with NC-rotary-swivelling-table A-axis +-115° (25 1/min), C-axis 360° (40 1/min),internal coolant supply 80bar, 1.000 l,airblast through spindle,pallet pool (PW 160, totally for 7 pallets, size 500x500mm, without pallets,cabin roof manually,3D touch probe RENISHAW,chipconveyor,el. compensation of thermal expansion SIN,3D toolradius-correction SIN,A-axis eccentric 262,5,el. handwheel SIN,BLUM laser,flushgun,oilmist suction,wiper for spindle head,swarf-flus ...
x-travel:650 mmy-travel:600 mmz-travel:500 mmrotary table::280 PW 160 mmtable load:300 kgspindle turning speed range:18.000 1/mindrive capacity - spindle motor:15 / 10 kWcontrol:SIEMENS 840D shopmill feed speeds infinitely variable:1 - 30.000 mm/minrapid traverse:45 m/minTool changer:119 (32+87) Pos.spindle taper ISO:HSK A-63 weight of the machine ca.:9,5 ttotal power requirement:41 kVA5-axis simultaneously universal-machining center,with NC-rotary-swivelling-table A-axis +-115° (25 1/min), C-axis 360° (40 1/min),internal coolant supply 80bar, 1.000 l,2-pallet changer,pallet pool for 4 pallets,airblast through spindle,cabin roof manually,3D touch probe RENISHAW,chipconveyor,el. compensation of thermal expansion SIN,3D toolradius-correction SIN,A-axis eccentric 262,5,el. handwheel SIN,BLUM laser,flushgun,oilmist suction,wiper for spindle head,swarf-flushing Z-slide,approx. 67.000 h "ma ...
x-travel:850 mmy-travel:700 mmz-travel:500 mmturning speeds:10.000 1/mintool taper:SK 40 control:iTNC 530 HEIDENHAIN tool change unit:38 round table:2 x D 280 mmspindle:32 / 17 kWspindle:159 / 107 Nmrapid traverse:45 m/mintotal power requirement:43 kVAweight of the machine ca.:10,5 tdimensions of the machine ca.:2,4 x 3,2 x 2,9 m5-axis machining center,NC-round-swivelling configuration dual round tables dia. 280 mm 3 D touchprobe RENISHAW,chip conveyor,tool-changing time (chip to chip) approx. 4,5 s,internal coolant supply thru spindle (40 bar / 600 liter),el. thermal compensation,airblast through spindle,el. handwheel,approx. 62.500 hours "machine on", approx. 19.900 hours "spindle on"
Quality unchecked. Provide: A-axis: -100° ~ +120° C-axis: 360° Positions on exchanger: 30 ... más información
x-travel:510 mmy-travel:400 mmz-travel:350 mmtable-size:600x400 mmspindle speeds:12000 (Motorspindel) 1/min.spindle drive:5,8 kwspindle taper:30 BBT oder SKrapid traverse in x-y-z axis:60 m/minTool changer:16 fachweight of the machine ca.:2,8 tCNC controller:SIEMENS 828D (10.4" LCD+SHOPMILL) high speed directl spindle motor:12000 1/mininner coolant:20 barchip conveyor - auger:im Bett Brandnew machine with: 1. CONTROL SYSTEM SIEMENS 828D (10.4" LCD+SHOPMILL)2. WORKING TABLE SIZE: 600 X 400 MM3. MAX. TABLE LOAD CAPACITY: 250 KGS4. SPINDLE SPEED 12.000RPM (DIRECT DRIVEN TYP)5. SPINDLE MOTOR 5.8 KW (1PH8087)6. SPINDLE NOSE BBT 307. X/Y/Z STROKE 510/400/300 MM8. X/Y/Z STROKE RAPID TRAVERSE: 60/60/60 M/MIN9. ATC CAPACITY 16 TOOLS (DISC TYPE)10. STANDARD SPLASH GUARD11. ELECTRICAL CABINET WITH HEAT EXCHANGER12. COOLANT UNIT13. MANUAL PULSE GENERATOR14. RIDGID TAPPING15. WITHOUT TRANSFORMER (POW ...
x-travel:800 mmy-travel:800 mmz-travel:800 mmturning speeds:12.000 1/mintool taper:SK 50 control:SIEMENS 840D shopmill tool change unit:240 fachsize of pallet:630 x 630mm mmspindle:52 kW / 430Nm total power requirement:87 kVAweight of the machine ca.:15 tdimensions for transport:4,6 x 2,95 x 2,7 mhorizontal machining center,NC-round-table pallet-changer (2 pallets),Internal Coolant Supply 40 bar,prepared for Infrared Touch Probe Renishaw MP 10 without probe,tool-breakage control (mech.),MQL,airblast through spindle,oilmist suction,TRANSMIT funbction,accuracy package,mode 4,glass window right door,incl. FASTEMS FPC 1000 pallet pool for 14 pallets, incl. setting up station, control, and 10 palletsapprox. 98.500 h main switch on apprax. 45.500 Spindle hours
x-travel:800 mmy-travel:600 mmz-travel:500 mmpallet size::320 x 320 mmtable load:150 kgspindle turning speed range:24.000 1/mindrive capacity - spindle motor:22 kWcontrol:HEIDENHAIN iTNC 530 feed speeds infinitely variable:20 / 20 / 40 m/minTorque:46 Nmrapid traverse:50 m/minTool changer:220 Pos.spindle taper ISO:HSK A-63 weight of the machine ca.:8,5 tdimensions of the machine ca.:6,5 x 5,5 x 3 mdimensions for transport:2 m5-axis simultaneously universal-machining center,with NC-rotary-swivelling-table A-axis +30/-110°, C-axis 360°,internal coolant supply 18-70bar, paper-filter,infrared touchprobe M&H PS 32.00,oilmist suction,MQL (minimal quantity lubrication),APS,ITC,el. handwheel,chipconveyor,EROWA pallet-pool for 24 pallets,approx. 131.000h "machine on", approx. 20.700h "spindle on"
x-travel:750 mmy-travel:600 mmz-travel:520 mmtable surface area:D 700 x 500 mmturning speeds:30.000 1/mintool taper:HSK 50 control:HEIDENHAIN iTNC 530 spindle:20 /15 kWtool change unit:60 pos.rapid traverse:50 m/mintable load capacity - central/maximum:350 kgtotal power requirement:50 kVAweight of the machine ca.:9 tdimensions of the machine ca.:3,2 x 2,65 x 2,8 m5-axis simultaneously HSC-machining center,NC-round-swivelling table B-axis 180°, C-axis 360°,chip conveyor,el. handwheel,mode 4,oilmist suction,internal coolant supply,approx. 152.000 hours "machine on", approx. 60.400 hours "spindle on" in total
with base, total size 170x32x65cm, welded back, needs to be ground loose ... más información
x-travel:2600 mmy-travel:700 mmz-travel:700 mmtable surface area:2900 x 700 mmrotary table diameter:750 mmtable load:500 kgcontrol:HEIDENHAIN iTNC 530 turning speeds:20 - 14.000 1/mintaper ISO:HSK 63 tool change unit:60 Pos.rapid traverse:40 m/minspindle:19 / 14 kWtotal connected load:56 kVAweight of the machine ca.:16 tdimensions of the machine ca.:6,5 x 3,4 x 3 m5-axis simultaneously universal machining center,rigid table with integrated NC-rotary table (left) and B-axis in milling head,direct measuring system,Swarf Conveyer,3D Touch probe HEIDENHAIN TS 649,el. handwheel,internal coolant supply 40 bar,Flush gun,mode 4,partition in working area (removable)safety device (for power failure),tropical package,reading hours:approx. 28.000 h "machine on"approx. 12.000 h "spindle on"
Tap capacity: M24. -Pinole power supply range: 0.1 - 0.2 mm/rev. 2 Speeds (variable). -Column diameter: 150 mm. ... más información