mandrinadoras y centros de mecanizado usadas para la venta

Facing slide needs overhauling. ... más información

drill press; approx. 183 cm high; 45 cm wide ... más información

Magnetic drilling machine; Max. drilling diameter 35 mm drilling diameter; power 1600 watts; connection 230 Volt; magnet strength 16000 newtons; speed 810 rpm; drilling depth 145 mm; including oil reservoir for cooling and lubrication; belt for fall protection; Condition unused, in its original packaging

Unused, Automatic cooling system, drilling depth 210mm, adhesion force 16000 N, Speed up to N = 830 rpm, power 1600 kw, ... más información

Modell:RB 50 | RB 63 | RB 80 bore capacity in steel (diameter):50 | 63 | 80 mmarm length:1600 | 2000 | 2500 mmworkpiece height max.:1220 | 1600 | 2000 mmDistance between spindle and column, max.:1600 | 2000 | 2500 mmDistance between spindle and column, min.:350 | 400 | 450 mmspindle taper MT:5 | 5 | 6 MKspindle turning speed range:25-2000 | 20-1600 | 16-1250 U/mintransmission ratio:16 Stk.feed range:0.04-3.20 | 0.04-3.2 | 0.04-3.2 mm/mindice table:630x500 | 630x800 | 800x1000 mmpower capacity:4 | 5,5 | 7,5 kWWeight approx.:3500 | 7000 | 11000 kgMachine size (LxWxH):2500x1070x2840 | 3080x1250x3291 | 3730x1400x4025 mmcube table GB/T6170:Größe siehe tech. Daten foundation bolts:6 Stückslots with screws:6 Stückreducing bush:MK 3/1, MK4/2, MK 4/3, MK 5/4 payment: 100 % before loadingwarranty:12 months

:RB 100 | RB 120 bore capacity in steel (diameter):100 | 125 mmarm length:3150 | 4000 mmdistance spindle center to floor plate:2500 | 2500 mmdistance spindle center to table:min. 750 mmspindle stroke:500 | 560 mmDistance between spindle and column, max.:3150 | 4000 mmDistance between spindle and column, min.:570 | 600 mmspindle taper MT:6 MK | Metrisch 80 spindle turning speed range:8-1000 | 6-800 U/mintransmission ratio:22 feed range:0.06-3.2 mm/mindice table:800x1250 mmpower capacity:15 | 18,5 kWWeight approx.:20000 | 28500 kgMachine size (LxWxH):4780x1630x4720 | 5817x2150x5120 mmpayment: 100 % before loadingwarranty:12 months

table length:2200 mmtable width:2500 mmtable load:16 ttotal power requirement:6,5 kWfeed speeds:1,25 - 160 mm/minrapid traverse speed:2000 mm/minlongitudinal adjustment:1500 mmweight of the machine ca.:12 tdimensions of the machine ca.:4,1 x 2,65 x 0,95 m ... más información

Equipped with laser and extra clamp ... más información

x-travel:610 mmy-travel:580 mmz-travel:580 mmdistance spindle nose and table:70-650 mmdistance spindle center to table:80-660 mmtable height over floor:1150 mmpallet table size:400x400 mmmax. workpiece weight:400x2 kgtable - indexing:1° (optional 0,001°) spindle speeds:12000 1/minspindle drive:22/25 kWspindle speed steps:2 spindle nose:40 SK/BTspindle bearing diameter:75 mmrapid speed:60 m/minfeeds:1-20000 mm/Utool taper:40 SK/BTTool changer:60 fachtool diameter:75 mmweight of tools max.:12 kgworkpiece length:410 mmnumber of pallets:2 compressed air volume:400 l/mincoolant tank:550 lhydraulic tank:30 llubrication tank:2 ltotal power requirement:45 kvaweight of the machine ca.:9500 kgCNC controller:Siemens/Fanuc/Heidenhain automatic tool changer:60 fachcnc rotary table:1 °inner coolant:20 barServo motors:vom Steuerungshersteller ATC:80/120 CTS:35 oder 70 bar CNC controls from:Siemens/F ...

x-travel:710 mmy-travel:680 mmz-travel:680 mmdistance spindle nose and table:70-750 mmdistance spindle center to table:80-760 mmtable height over floor:1150 mmpallet table size:500x500 mmmax. workpiece weight:500x2 kgtable - indexing:1° (optional 0,001°) spindle speeds:12000 1/minspindle drive:22/25 kWspindle speed steps:2 spindle nose:40 SK/BTspindle bearing diameter:75 mmrapid speed:60 m/minfeeds:1-20000 mm/Utool taper:40 SK/BTTool changer:60 fachtool diameter:75 mmweight of tools max.:12 kgworkpiece length:410 mmnumber of pallets:2 compressed air volume:400 l/mincoolant tank:550 lhydraulic tank:30 llubrication tank:2 ltotal power requirement:45 kvaweight of the machine ca.:12200 kgautomatic tool changer:60 fachcnc rotary table:1 °inner coolant:20 barCNC controller:Siemens/Fanuc/Heidenhain Servo motors:vom Steuerungshersteller ATC:80/120 CTS:35 oder 70 bar CNC controls from:Siemens/ ...

x-travel:1050 mmy-travel:850 mmz-travel:970 mmdistance spindle nose and table:100-950 mmdistance spindle center to table:100-1070 mmtable height over floor:1300 mmpallet table size:630x630 mmmax. workpiece weight:1200x2 kgtable - indexing:1° (optional 0,001°) max. workpiece height:1100x1100 mmspindle speeds:10000 1/minspindle drive:30/25 kWspindle speed steps:2 spindle nose:50 SK/BTrapid speed:50 m/minfeeds:1-20000 mm/Utool taper:50 SK/BTTool changer:60 fachtool diameter:125 mmweight of tools max.:25 kgworkpiece length:610 mmnumber of pallets:2 weight of the machine ca.:21600 kgautomatic tool changer:60 fachcnc rotary table:1 °inner coolant:15 barCNC controller:Siemens/Fanuc/Heidenhain Servo motors:vom Steuerungshersteller ATC:80/120 CTS:35 oder 70 bar CNC controls from:Siemens/Fanuc/Heidenhain tool measuring system:von RENISHAW workpiece measurement system:von RENISHAW chip conveyor  ...

Including control box ... más información

x-travel:1200 mmy-travel:1000 mmz-travel:1000 mmdistance spindle nose and table:100-1100 mmdistance spindle center to table:200-1200 mmtable height over floor:1350 mmpallet table size:800x800 mmmax. workpiece weight:1800x2 kgtable - indexing:1° (optional 0,001°) max. workpiece height:1300x1250 mmspindle speeds:10000 1/minspindle drive:30/25 kWspindle speed steps:2 spindle nose:50 SK/BTrapid speed:50 m/minfeeds:1-20000 mm/Utool taper:50 SK/BTTool changer:60 fachtool diameter:125 mmweight of tools max.:25 kgworkpiece length:610 mmnumber of pallets:2 weight of the machine ca.:26000 kgautomatic tool changer:60 fachcnc rotary table:1 °inner coolant:15 barServo motors:vom Steuerungshersteller CNC controller:Siemens/Fanuc/Heidenhain ATC:80/120 CTS:35 oder 70 bar CNC controls from:Siemens/Fanuc/Heidenhain tool measuring system:von RENISHAW workpiece measurement system:von RENISHAW chip convey ...

Includes 2x grinder. ... más información

 ... más información

spindle diameter:160 mmx-travel:6000 mmy-travel:5000 mmz-axis:1500 mmdimension of the ram:470 x 500 mmw-axis:900 mmspindle taper ISO:50 spindle turning speed range:1 -3000 U/minspindle motor:71 kWfeed speeds:1 - 5000 mm/minrapid speed:25 m/mintotal power requirement:187,6 kWdimensions of the machine ca.:14,1 x 13,4 x ü.F.7,8 mMachine in mint condition !with CNC control HEIDENHAIN iTNC 530autom. toolchanger 80 - pocketsCNC Rotary Table 4000 x 4000 mm max. table load 75 to.longitudinal movement V-axis 1500 mmautom. head changerwith universal Milling Headuniversal high speed milling head 5-axis 18000 rpmRENISHAW measuring probebelt filtering unit and through spindle coolantchip conveyor

spindle diameter:130 mmx-travel:10000 mmy-travel:2500 mmz-axis:800 mmw-axis:750 mmspindle taper ISO:50 spindle turning speed range:1 - 3000 U/minpower maindrive:37 kWfeed speeds:1 - 6000 mm/minrapid speed:15 m/mintotal power requirement:90 kWwith CNC control HEIDENHAIN TNC 430- automatic toolchanger 60-pockets- NC rotary table 2500 x 2000 mm max table load 20 to.- longitudinal movement table 1500 mm- floor plate 5000 x 2000 mm, angle clamping plate, chip conveyor- coolant attachment with through spindle coolant 30 l/min. 20 bar

x-travel:3000 mmy-travel:1000 mmz-travel:1200/1300 mmspindle taper ISO:50 spindle turning speed - stepless:20 - 8000 U/minpower main drive with:40% / 52 kWfeed speeds:1- 30000 mm/minrapid speed:30 m/minweight of the machine ca.:34 tdimensions of the machine ca.:8,5 x 7,25 x 3,95 mwith CNC Steuerung SIEMENS 840 D autom. toolchanger 60-pocketsNC Milling Head +/- 105 Grad stepless or indexing positioning with clamping 2400 Nm / 4200 NmCNC-table hoirzontal Sempuco SKV-NC 7/600 with zero point clamping fixture2 component bridges 1500 and 2000 mmmax. component weight with counter spindle 3200 kg, cnetre height 410 mm, face plate diameter 600 mm autom. doors, coolant attachment through spindle coolant 40 bar, chip conveyor

x-travel:2500 mmy-travel:1000 mmz-travel:750 mmtable surface area:3220 x 1000 mmWorkpiece weight approx.:3000 kgspindle taper ISO:50 milling spindle turning speeds:20 - 5000 U/minfeed speeds:1- 30000 mm/minrapid traverse:30 m/mintotal power requirement:40 kWdimensions of the machine ca.:6,9 x 4,1 x 3,7 mweight of the machine ca.:21 twith CNC HEIDENHAIN TNC 42630-pockets autom. toolchangerRENISHAW measuring probecoolant attachment and chip conveyordiverse toolholders

:HBM-110 | HBM-110L | HBM-110XL spindle diameter:110 mmx-travel:900|1250|1600 mmy-travel:900|900|1200 mmz-travel:1400|1400|1400 mmW-axis (spindle longitudinal):600 mmB-axis (table):360x1 °table load:5 ttable-size:1100 x 960|1250 x 1100|1250 x 1100 mmT-slots:22 mmspindle speed:22 Stufen, 8-1000 1/minspindle taper:50 ISOrapid speed:(X / Y / Z / W) 2500 mm/minspeed - faceplate:4-200 1/mintorqe of face plate:1960 Nmdia of faceplate:630 mmmovement of facing slide:180 mmweight of the machine ca.:11,5|18|20 tmain drive:7,5 kWMachine size (LxWxH):5120x3380x3100 mm2-Axis DRO :für X- und Y-Achse (von NEWALL) CE-design:von TÜV Süd servo motors:von Siemens/Fanuc/Fagor CNC controls from:Siemens/Fanuc/Fagor