mandrinadoras y centros de mecanizado usadas para la venta

Drilling capacity steel/GG: 35/40 mm Spindle mount: 4 MK Projection: 350 mm Table size: 560 x 560 mm Quill stroke: 180 mm Spindle speeds: 30 - 1450 rpm Feeds: 0.1/0.2 mm Drive motor: 400 V, 0.75/1.5 kW Space requirements: 900 x 550 x 2300 mm Weight: approx. 500 kg  ... más información

Simultaneous 5-axis design - Control system SIEMENS 840 D SL - Working range X= 780, Y= 600, Z= 520 mm - C-axis 360° - B-axis -50°/+110° - Table clamping surface 720 x 540 mm - Spindle speed 20 - 15,000 1/min - Tool magazine 60 places - Tool holder HSK 63A - High-pressure system IKZ 40 bar - Probe 3D Weight 8,100 kg

FOR SALE OKK Horizintaled machining center type HP-500S in good condition. Pallets size 500 x 500 mm. Maximum speed of main spindle 12,000 rpm. X-, Y-end Z-axis movement is 630 x 620 x 710 mm. Fanuc control type 160iS-MB . Main motor power 22/11 kW/ tool changer with 60 positions. Still to be seen under Syrom, subject to prior sale.

MIKRON UCP 600 VARIO machining center TECHNICAL CHARACTERISTICS: Year: 2006 CN Type: HEIDENHAIN iTNC 530 Number of continuous axes: 5 X-axis travel: 600 [mm] Y-axis travel: 450 [mm] Z-axis travel: 450 [mm] Table length: 325 [mm] Table width: 325 [mm] Max. weight Permissible on the table: 200 [Kg] Table area Ø: 450 [mm] Pin Attachment: HSK-A 63 Minimum speed. Spindle: 100 [RPM] Max. speed Spindle: 20000 [RPM] Spindle power: 13.5 [kW] Number of tool magazine stations: 120 Max. length Tool Size: 250 [mm] Max. weight per tool: 6 [Kg] Max. diameter Tool Size: 125 [mm] Supply voltage: 400 [V] Machine Weight: 7700 [Kg] Tool changer weight: 800 [Kg] Palletizer weight: 1200 [Kg] Visible machine under power for testing at our premises, by appointment. Price excl. VAT on request, truck loading included. Possibility of shipping throughout France as well as intern ...

I am selling a well used, fully functional, bench drill from WMW model BT 2. Technical data for the machine are : Recording: MK2 Drilling stroke: approx. 100mm Max table spindle spacing: approx. 440mm Weight: 165kg. Table surface: 340mm x 280mm LxWxH: approx. 600mm x 500mm x 1300mm Incl. lighting and instruction manual. The oil has been changed. Incl. new drill chuck. The table is in good condition. Nothing is drilled. The machine can be viewed and tested under power by prior appointment. If you have any questions, just get in touch. Shipping, on pallet, is not a problem. Please inquire about shipping costs with postal code. On-site loading is possible without any problems. The sale is without guarantee and warranty. Returns are excluded. All information is subject to change.

Forest-Line MajorMill 5-Axis CNC Gantry Mill Year: 1992/2008 Number of Axes: 5 Type of CNC Control: Fidia C20 CNC Control Retrofit in 2008 Table Size: 83.27" x 236" (2115x6000mm) X: 236” (6000mm) Y: 110.23” (2800mm) Z: 49.21” (1250mm) Max. Cutting Height: 62.99"(1600mm) Effective Width Between Columns: 94.5"(2400mm) Spindle Speeds, 3-Range: 10-3200 RPM Main Milling Head on Ram: Hard Steel Cartridge - 3 Speed Ranges - Equipped with an accessory holder plate with auto clamping: Indexing 2.5 degrees Spindle Taper: #50 ISO A-Axis Spindle Head Tilt: +/-95 Degrees B-Axis Spindle Head Swivel: 360 Degrees A-Station AAC: yes Automatic Head Changer: yes Automatic Attachment Changer (ACC):: Yes - 3 Heads Right Angle Head: 10 - 3200 RPM, 2.5 degree indexing DRC12 Head Attachment (double stepless rotation): 10 - 5000 RPM, (Double stepless rotation) Multiplying spindle exten ...

Matsuura MC 1000 VG, Built in 2000, Control Yaskawa J 300, Dokyjh Travel X/Y/Z 1020/550/410 mm, Tool changer 30 times, Spindle speed up to 20,000 rpm, 3D edge probe,  ... más información

Huron KX 15 / 5 axles, Built in 2001, Control Siemens 840 D, Travel X/Y/Z 800/1000/550 mm, Spindle speed up to 20,000 rpm, Recording HSK 63, Ww 20 speed, 2 axis swivel / rotary table, 3D edge probe, electr. Handwheel  ... más información

For sale Brother CNC drilling, milling and tapping machine type TC-325 Very fast machining center with table size 800 x 300 mm. Turret magazine with 14 positions. Maximum speed 10,000 rpm, machine weight 2,800 kg. . Machine dimensions L 2417 x W 1830 x H 2406 mm. Main motor power 7 kW. The machine is delivered without machine clamp. There are different BT-30 tool holders included

Control Heidenhain iTNC 530 Travel x/y/z 600 mm / 400 mm / 600 mm Tool changer with 24 positions Table clamping surface / max. table load 450 mm x 750 mm / 500 kg Spindle speed range / tool holder 50 – 9,000 rpm / SK 40 Rapid traverses up to 40 m/min Total power requirement / machine weight 13 kW / 3.2 t Machine dimensions L/W/H 2.7 m / 1.8 m / 2.8 m Accessories: Chip collection device, electronic handwheel, IKZ, 3D touch probe

For sale Hurco vertical machining center type VMX-30 rental of an Ultimax 4 controller. Table size 1020 x 510 mm. Maximum speed is 10.000 rpm. The machining center has a tool changer with 24 positions, BT-40 spindle holder, cooling by spindle, chip conveyor, etc. All books are available, available at short notice, subject to prior sale. Other data; x-travel: 760 mm Y-travel: 510 mm z-travel: 610 mm Table surface: 1020 x 510 mm Workpiece weight max.: 1000 kg Spindle speeds: 10 - 10,000 rpm Spindle holder ISO: 40 Rapid traverse in X-Y-Z axis: 30/30/20 Feed speed: 1 -10000 mm/min Total power requirement: 18 kW Machine weight approx.: 5 t Approx. space: 4 x 4.2 x 2.8 m

For sale: Haas Vertical Machining Center Type VM-2. This is a vertical machining center that is in excellent condition and was delivered in 2020! The travel of the X, Y and Z axes is 762 x 406 x 508 mm. The machine is equipped with a vertical tool changer with 30 positions and a maximum speed of 12,000 rpm (direct drive). and cooling by the spindle with a maximum pressure of 20 bar. The machine has a large memory of 1 GB and a wireless measuring system from Renishaw, tool length and workpiece, including VPS, Coord, Macro and Sum options. The machine also has a programmable P-Cool coolant supply. Nice machining center that can be learned at short notice. For more information. Mail to: chrismachinematch.nl

Drilling Ø 15/18 mm Table size: 220 x 285 mm Projection: 215 mm Spindle speeds: 480 - 3800 rpm Operating voltage: 380 V Total power requirement: 0.55 kW Dimensions: 930 x 700 x 1770 mm Weight: 128 kg  ... más información

Mirrror MCM Jet Five horizontal machining centers connected in line :::SPECIFICATIONS::: CNC Model: Fanuc - CNC Version: 16i - M - Tool Holder: HSK 100 - Spindle Power: 44 - 35Kw Spindle speed: 14000 - Number of tools: 980 - X axis stroke: 3000mm - Y axis stroke: 1800mm - Z axis stroke: 1800mm Rapid feeds for linear axes X Y Z: 40m/min Pallet size: 1250x1250mm Pallet Type: Continuous Multi-pallet: yes Number of multi-pallet pallets: 28 Pallet System: Fastems Maximum load allowed: 3000Kg High refrigerant pressure: yes Pressure value: 65bar External tank system with filter: yes Chip conveyor: belt conveyor Presetting: yes Other technical data: System consisting of 2 in-line machines sharing pallets and tools :::D DIMENSIONS AND WEIGHT::: Length: 35000mm Width: 11000mm Height: 5000mm

Vertical machining center Manufacturer: Mikron Type: UCP 600 Year of construction: 2007 Control: Heidenhain ITNC 530 Axles: 5 Travel X: 530 mm Y: 450 mm Z: 450 mm Tool changer: 30 places HSK 63 Speed: 20,000 rpm Drive power: 40% ED 30 KW Chip Conveyor: Yes Internal Coolant Supply: Yes Weight: approx. 7500 kg -Probe - Blumlaser - ICC with paper belt filter 700 liters -Conveyor - Rotary table Ø 400 mm - Spindle cooling Errors and prior sale excepted.

KOVOSVIT MAS MCV 1016 Quick Vertical Machining Center  ... más información

In-line drilling rigs with 8 pieces of drilling spindles for the processing of easily machinable materials such as wood - aluminium - non-ferrous metals, composite materials and various plastics. Each of the drilling units produces 450 watts. Infinitely adjustable drilling feed speed Infinitely adjustable drilling depth and return path of the drilling unit. Slanted holes in the range +/- 30°. Pneumatic workpiece tension Table size 3,000 x 800 mm (optionally larger) Working height approx. 870 mm. Horizontal adjustment of the drilling units 240 mm. Vertical adjustment of the drilling units 320 mm. Dimensions 3 x 1.25 x H 1.98 m Weight approx. 1,000 kg

HAAS VF 2SS Machining center vertical ISO40 Spindle speed:12000 rpm Number of tools: 24  ... más información

HAAS VF-2 DHE Machining center - vertical ISO 40 Spindle speeds: up to 7500 rpm Number of tools: 20  ... más información

Working distances x/y/z approx. 300 mm / 200 mm / 300 mm Max. drilling diameter approx. 14 mm  ... más información