mandrinadoras y centros de mecanizado usadas para la venta

x-travel: 520 mmy-travel: 400 mmz-travel: 450 mmspindle taper ISO: 40 control: TNC 360 coolant tank: ltotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: 2450x2300x3300 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... más información

bore capacity in steel (diameter): 75 mmarm length: 1700 mmworkpiece height max.: 370 - 1700 mmtotal power requirement: 12 kWweight of the machine ca.: 7000 kgdimensions of the machine ca.: mC S E P E L (Hungary)Radial DrillModel RFh 75/2000 Year 1977 Serial No. 61158_______________________________________________________Drilling capacity, Steel / Cast Iron, max. 75 / 90 mmThread cutting Steel / Cast Iron M 60 / 70Distance between column and spindle centre, max. 1,700 mmSpindle taper ( Morse Cone) MK 5Vertical stroke of radial arm 380 mm21 Spindle speeds 19 – 1.900 rpmBase plate 1.100 x 2.300 mmMounting height, min. ...

VR 4A/1250 Producer Mas Max. drilling diameter 50 mm Max. vertical arm adjustment 750 mm Taper in spindle 4 Morse Main motor output 4 kW Dimensions l x w x h 2250x1055x2970 mm Machine weight 2700 kg  ... más información

Inv. Num. : 6255 Type: ADF100-010 Producer: TITAN Created: 1977 Parameters: Work table length: 1100 mm Work table width: 130 mm Spindle diameter: 100 mm X-axis travel: 1600 mm Y-axis travel: 1200 mm Z-axis travel: 2000 mm Equipment: DRO 2 x Angle Tool Holder

bore capacity in steel (diameter): 30 mmtool taper: MK 4 bore stroke: 225 mmthroat: 315 mmtable-size: 650 x 560 mmfeeds: o,1 bis 1,5 mm/Uspindle turning speed range: 40 - 1800 U/mintotal power requirement: 5,15 kWweight of the machine ca.: 1,0 tdimensions of the machine ca.: 1,2 x 0,8 x 2,5 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SCHARMANN HEAVYCUT 2 WFT 150 CNC Floor type Boring Mill Year 1978 Spindle Diameter: 5.9" (150mm) Milling Spindle Diameter: 11.02 (280mm) Spindle Taper: CAT 50 Ram Cross Section: 11.81" x 11.81" (300x300mm) Vertical Head Travel, Y-Axis: 137.79" (3500mm) Column Travel, X-Axis: 712.59" (18000mm) Quill Travel, Z-Axis: 23.43 (595mm) Ram Travel, W-Axis: 27.6" (700mm) Z & W Axis, Combined: 51.03" (1296mm) Spindle Speeds: 5.5-1000 RPM Spindle Feed Range: 0.003-240 IPM Rapid Traverse: 396 IPM Spindle Motor: 70 HP/ 105 HP EQUIPPED WITH: Heidenhain TNC 407 CNC Controls Ram and Spindle Travel Sliding Way Covers On X-Axis Bed Right Angle Head With 1 Degree Manual Indexing Hardened Ways Re-pained recently

Drilling capacity steel/GG: 40/55 mm Spindle holder: 4 MK Projection: 345 mm Table size: 450 x 600 mm Quill stroke: 180 mm Spindle speeds: 30 - 760 rpm Feeds: 0.15; 0,2; 0.3 & 0.36 mm Drive motor: 380 V, 2.3/3.4 kW Space requirement: 1150 x 730 x 2000 mm Weight: 600 kg  ... más información

Manufacturer: UNION - Gemany Model: BFT 130 / 5 Condition: very good New in.: 1978 / 2000 , the machine was completely modernized for Company ALSTOM Control: conventional with Heidenhain Linear readings in 3 axes Technical details: Spindle diameter: 130 mm Spindle speed: 4.5 - 900 rpm Spindle cones: MORSE 5 ( the price of the machine will deliver free of charge adapter for ISO 50 ) X axis: 1600 mm Y axis: 1600 mm Z axis: 2500 mm W axis: 1000 mm Table: 1600 x 1400 mm Table Rotation: 360 Charging the table: 8000 kg Speed: 4.5 to 180 rpm Power range: 0.63 to 2000 mm / min Fast forward: 2 m / min Total required power: 35 kW Approximate Weight: 47000 kg EQUIPMENT: Heidenhain readings line in three axes, flat disc

number of spindles: 3 bore capacity in steel (diameter): 40 mmbore stroke: 180 mmweight of the machine ca.: 2,3 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... más información

Stand drilling machine in row arrangement, used Gang drilling machine, used Type: BT 6.52 Manufacturer / make: Steinel Built/ new in: 1978 Drilling capacity / drilling capacity: 6 mm in St 60 Spindle cone/ spindle taper: MK 1 Drilling spindle discharge / distance center drill spindle to column: 204 mm Drilling stroke/ way of spindle: 90 mm Table clamping area/ table size: 800 x 390 mm Column diameter/ diam. of coulmn: 60 mm Drilling spindle speeds / speeds of drilling spindle: 1400 / 2800 / 5600 per min/ per minute Total connection value / rated power: 0.25 kW each => 1 kW Weight / weight: approx. 0.4 t

Inv. Num. : 5480 Type: W 160 G Producer: ŠKODA Created: 1978 Parameters: Control System: MEFI Spindle drive power: 55 kW Minimum spindle speed: 2 1/min Maximum spindle speed: 800 1/min Mechanical feed length axis X: 6000 mm Mechanical feed length Y-axis: 2500 mm Mechanical feed length Z-axis: 1250 mm Maximum feed rate X-axis: 3200 mm/min Maximum feed rate Y-axis: 3200 mm/min Maximum feed speed Z-axis: 3200 mm/min Cone: M 100 Spindle diameter: 160 mm Maximum excavation depth: 1600 mm Spindle extension: 1250 mm Base size: 8000 x 5500 mm Travel of the stand on the bed: 6000 mm

Mk 5, 14 - 1800 rpm, drilling spindle stroke 400 mm, 0.05 - 2.5 mm/U, weight approx. 7 tFurther:Radial WMW BR 56/1600Radial drilling machine Raboma 12 Uh 1250 with turning tensioner2 squid reversing tensioner 800 mmsee pictures  ... más información

 ... más información

spindle diameter: 105 mmx-travel: 1250 mmy-travel: 1000 mmz-travel: 600 mmtable length: 1100 mmtable width: 900 mmtool adaptor: 50 ISO / MKtotal power requirement: kWweight of the machine ca.: tCNC Table Borer, Reconditioned 2002, BOSCH CC 300The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

X / Y / Z / W = 8000/3200/1600/1250 Working spindle diameter 160 mm Spindle taper M 100 Maximum spindle drilling depth 1,600 mm Largest quill extension 1,250 mm Spindle speed in the range of 2 - 800 min-1 Displacements in the range: drilling 0.5 - 1,600 mm / min milling 0.5 - 3,200 mm / min Power consumption of the spindle electric motor 6 - 55 kW Threads: metric Whitworth 0.5 - 12 mm 1 - 28 thread / 1 VERTICAL HEADBOARD TRAVEL ON STAND 2,500 mm TRAVEL OF THE STAND ON THE BED 6,000 mm MOTHERBOARD DIMENSIONS 8,000 x 5,500

bore capacity in steel (diameter): 35 mmthroat: 330 mmbore stroke: 165 mmspindle taper: MK4 turning speed range - stepless: 130-480/480-1750 U/mintable width: 742 mmtable depth: 594 mmtotal power requirement: 2,2 kWweight of the machine ca.: 700 tFeed with electromagnetic feed clutch0.1/0,2/0,3right- and left rotationCooling unit not available Table and Drilling Head height adjustableheight adjustment of upper drilling unit: 200 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

taper MK: MK5 round table: ja weight of the machine ca.: 1.200 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... más información

bore capacity in steel (diameter): 32 mmbore capacity in cast iron: 40 mmworkpiece height max.: 550 mmtable surface area: 1530 x 750 mmspindle taper MT: 4 throat: 1000 mmbore spindle stroke: 170 mmspindle turning speed range: 38 - 2000 U/minvoltage: 380 Vconnected load: 5,0 kWweight of the machine ca.: 2,0 tdimensions of the machine ca.: 2,0 x 1,6 x 2,1 mFast radials with- feed- 3 tables- Thread cutting device- Coolant system- Tool holder with toolssee picturesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 130 mmx-travel: 2750 mmy-travel: 2500 mmz-travel: 1050 mmw-axis: 1000 mmRadial face slide diameter: 800 mmradial face slide travel: 240 mmtable surface area: 1800x2000 mmturning speeds: 4,8-900 U/minworkpiece weight: 8000 kgfaceplate speeds from - to: 4,5-180 U/minFeed: 5-2000 mm/minthreading: total power requirement: 40 kWweight of the machine ca.: 37 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1000 mmy-travel: 1000 mmz-travel: 1600 mmspindle diameter: 90 mmtable surface area: 1000 x 1120 mmtable load capacity: 2500 kptable rotation: 360 °W-axis (spindle longitudinal): 710 mmspindle turning speed range: 8 - 1600 U/minfeeds: 0,8 - 2000 mm/minmain drive: 11 kWtool taper: MK 5 total power requirement: 16 kWweight of the machine ca.: 8,6 tdimensions of the machine ca.: 5 x 3,15 x 2,65 mwithcoolantelektro cabinettelescoping coversThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.