subcategorías
(el tercer nivel de categoría)
Fabricante:
(Categoría: 102)
number of spindles:6 spindle passage:18 mmturning length:63/50 mmweight of the machine ca.:4,5 tspindle drive motor:11 kW ... más información
Screw-cutting lathe 1a667, good technical condition, low wear, 100% set. ... más información
An important, at the same time vulnerable, spare part for a turning-boring machine 1580L (also compatible with 1563), namely a cross-beam (traverse) produced by KZTS (Kolomna, RF), not used, warehouse storage, 1992 onwards. surface corrosion is not significant, cleaning, grinding and painting should be carried out directly in the workshop before installation. Casting in excellent condition. The part is ready for any inspection. Photo and drawing with exact dimensions are included. Making another new cross member is costly and time consuming.
The machine is in good technical condition. Circulating diameter above the bed: 630mm Distance between points: 4000mm Accessories: chucks, lunettes weight: 3,500 kg Upon prior arrangement, the possibility of inspection while in operation. Year of manufacture/SO/GO: 1979/-/1993 ... más información
Quality unchecked. Equipped with powered tools and bar feeder! X-axis: 250mm Y-axis: +50mm/-50mm Z-axis: 580mm C-axis: 0.001° C-axis: 5000rpm Chip bin not included! ... más información
screw-cutting lathe model 1M65 (RMTs 5000 mm) - Ryazan Machine-Tool Plant. Equipment after a major overhaul with modernization of the electrical and mechanical parts of the machine (a frequency converter is installed, the speed box of the machine is modernized (2-stage), the speed is controlled by a joystick) Specifications: Model 1m65 machines are designed for a variety of turning operations, including turning cones and threading: metric, inch, modular, pitch The largest diameter of the workpiece to be installed and processed, mm: over support, mm 650 over the groove in the bed, mm 1400 The biggest length of the workpiece to be processed, mm 5000, The length of the groove in the bed from the cartridge mirror, mm 390 Headstock spindle end size according to DIN 2-15M Number of spindle speed steps 24 Diameter of the cylindrical bore in the spindle, mm 128 Spindle speed limits, ...
turning diameter over bed:502 mmturning diameter over slide rest:310 mmturning length:1500/1000 mmcentre height:250 mmbed width:300 mmmax. workpiece weight between centres:750 kg:225 kgspindle bore:58 mmspindle turning speed range:85-1250 (3 Getriebestufen) U/minspindle nose:A2-6 longitudinal feed:0,05-0,752 mm/Ucross feed:0,022-0,296 mm/Umetrical thread cutting:0.5 - 7,5 mm/Uthreading WHITWORTH:60-4 TPIrange of module thread:0,25-3,75 mm:120-8 mm/min.diameter of quill:69 mmsleeve conus:4 MKquill stroke:200 mmpower requirement:5,5 kWMachine size (LxWxH):(Spw. 1500mm) 3130x960x1550 mmmachine weight:2090 kgcenter morse:2 StückBrand new Center Lathe KRAFT DLZ 250 SeriesMore information can be found in the appendix
turning diameter:230 mmturning length:810 mmcentre distance:1.000 mmturning diameter over bed:460 mmspindle passage:56 mmchucking diameter:200 mmturret head:8 x VDI 30 Pos.turning speeds:3.100 1/minmax. workpiece weight:570 kgspindle motor:18 kWdimensions of the machine ca.:3,7 x 1,9 x 1,8 mweight of the machine ca.:2,9 tteach-in lathe,PARAT tooling-system,hand operated collet chuck,3 jaw chuck,4 toolholders
The massive, one-piece bed is made of high quality Meehanite cast iron. The bed is equipped with an additional guide to ensure greater rigidity, the total width between the guides is 800 mm. The caliper is also equipped with an additional guide for heavy cutting applications. The guides are hardened, carefully ground and coated with Turchite B.
-Flood damage, machine only suitable for retrofit, not operational, -face plate 3,000 mm, turning diameter max. circulation 3,600 mm, absolute turning height 2,100 mm under ram, - Table barrel load approx. 20 tons, -incl. tool changer, face plate rpm 120, Attention! This machine has already been dismantled and is in storage.
The machine is in good technical condition. Max. diameter above bed: 1050 mm Distance between spikes: 2000 mm Diameter above transverse ram: 727 mm Max. workpiece weight: 5000 kg Spindle caliber: 102 mm Shaft motor power: 22 kW Tailstock: yes Chuck type: 3 jaws Length x width x height: 4860 × 1970 × 1500 mm Weight: 7600 kg Upon prior agreement, the possibility of inspection while in operation.
Machine weight: 11900 kg Total machine input:: 30 kW Circulating diameter above the bed: 1250 mm Revolving diameter above support: 940 mm Distance between spikes: 8000 mm Spindle drilling: 102 mm Max. workpiece weight: 6000 kg Clamping plate diameter: : 1250 mm Machine dimensions lxwxh: 10800x1970x2000 mm
turning diameter:1010 mmturning length:3000 mmcontrol:FANUC Oi TF mit Manual guide max. swing over slide:718 mmbed width:500 mmspindle taper:A2-11 spindle speeds:0-1400 1/min.spindle bore:130 mmtransmission ratio:2 Stk.tailstock quill diameter:120 mmtailstock quill stroke:300 mmtaper of tailstock quill:6 MKmax. length of work piece:3000 mmrapid traverse x/z:7,5/10 m/minpower requirement:22 kWweight of the machine ca.:8050 kgdimensions of the machine ca.:5800x2290x2515 mmturret:Duplomatic DM TR25 with BMT75 (m. Y-Achse) c-axis:kontin. mit separatem Motor 3-jaw hydraulic chuck:500 tools:1 Satz New CNC lathe KRAFT ST 500/3000 with Fanuc Oi TDMade in EuropeFor more information please see the attached documents
Model:2012, 1500mm Spindle:115 mm, Over Counter Diameter: 580 mm, Swing Diameter on Support: 300 mm. Bridge Gap Diameter 740 mm. DIAMETER Counter Width: 700 mm, Transverse Support Width: 460 mm, Turning Size Net:1500 mm, SPEED INTERVALS: 16 STEPS / 26 - 2000 rpm. ENGINE POWER: 7.5 KW Sleds are clean. ( FIXED and TRAVELING BED ) 3x 300 Mirror, 3x 200x Mirror HIGH PRECISION RADIP ENGINE / SERIAL MOVEMENT WATER AND LIGHTING EQUIPMENT BACK SHEET AND MIRROR PROTECTION AND CHIP SPRINGS IT IS ON THE SHEDDING HOUSING. FLANGES, TAILS, KEYS and FULL tool kits are available. Fixed bed, floating bed and special pipe bed in different large diameters (2 pieces), Rapid on Transverse Support, There are double-stage and rapid (fast movement) tailstock. Swich Stopper Feature for Occupational Safety. ( EMERGENCY STOP BUTTON ) It has been used very little and cleanly. HIGH SP ...
faceplate diameter:2500 mmswing diameter:3000 mmturning height:1700 mmmax. turning diameter:2800 mmweight of the machine ca.:53 tChip ConveyorCoolant TankOil/Water SeparatorMachine Cover (High guarding)Heat exchanger For Electrical CabinetAuto Lubrication for Guide way4 Jaw Manual Chuck 1600mmHydraulic UnitBT50 Tool Connection in RAMMetal frame and case in machine shipment packing(Wooden packing with metal base)3 colors Warning LightChamber lightAnti- Dropping in Z axis -- Auto Motor Brake SystemOptions InstalledAir Conditioner For cabinetCoolant Through Spindle Filter for Coolant Water CE Mark Transformer
faceplate diameter:2000 mmswing diameter:2500 mmturning height:1700 mmmax. turning diameter:2300 mmweight of the machine ca.:52 tChip ConveyorCoolant TankOil/Water SeparatorMachine Cover (High guarding)Heat exchanger For Electrical CabinetAuto Lubrication for Guide way4 Jaw Manual Chuck 1600mmHydraulic UnitBT50 Tool Connection in RAMMetal frame and case in machine shipment packing(Wooden packing with metal base)3 colors Warning LightChamber lightAnti- Dropping in Z axis -- Auto Motor Brake SystemOptions InstalledAir Conditioner For cabinetCoolant Through Spindle Filter for Coolant Water CE Mark Transformer
faceplate diameter:1000 mmswing diameter:1350 mmturning height:1070 mmtotal power requirement:75 kvaweight of the machine ca.:25 tdimensions of the machine ca.:5,3x4,6x5,5 mStandard accessories:Chips Conveyor & Coolant TankOil/Water SeparatorMachine Cover (High guarding)Heat exchanger For Electrical CabinetAuto Lubrication in Guide way4 Jaw Manual Chuck 1000mmHydraulic UnitBT50 Tool Connection in RAMMetal frame and case in machine shipment packing(Wooden packing with metal base)3 colors Warning Tower LightChamber lightAnti- Dropping in Z axis -- Auto Motor Brake Systeminstalled options:Air Conditioner For Electrical BoxCoolant Through SpindleFilter Of Coolant WaterCE MarkTransformer
turning diameter:300 mmtotal power requirement:2 x 160 kWweight of the machine ca.:2 x 18 tswing dia.:350 mmstroke of vertical slide:250 mmstroke of the horizontal slide:280 mmspindle diameter in front bearing:140 mmspindle turning speed range:80-1120-2800 U/minAvailable from 01.08.2024Flexible rotating cells DV-32-2 In day frame construction consisting of: 2 CNC vertical lathes each with: 1 main spindle and 1 cross slide with CNC Sinumerik 3T suitable for synchronous or asynchronous machining processes With integrated loading and measuring automation