subcategorías
(el tercer nivel de categoría)
Fabricante:
(Categoría: 102)
Weight: 1.5t, connected load: approx. 1.5t, on-site inspection is possible. ... más información
A TADU lathe is available, which has been retrofitted with CNC technology by Konrad Seidler. Speed: max. 200 rpm, turning diameter: 1750 mm (interference circle diameter), control: Siemens 840D, space requirement X/Y/: 5000mm/5000mm. Including a turret with 8 tool holders. ... más información
number of spindles:6 spindle passage:51 mmSchutte SF51 DNT, yob. 1987, our ID #61868Article: cam-controlled multi-spindle automatic latheManufacturer: SchütteType: SF51 DNTYob: 1987Six-spindle automatic lathe with 6 main spindlesmax. nominal diameter D=51mmelectronic cam control Balluffgripper in position 6 for backworking, sorting chuteindependent longitudinal feed layer 5screw chip conveyorTapping couplingsInterface for: Bar feeder IEMCA PRABar feeder IEMCA PRA40/33/FScope of delivery without the blue chip conveyorThe tooling will differ from the scope of delivery!Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
Number of axes: 3, max. turning range: 350mm, turning length: 515mm, max. spindle speed: 8000/min, max. bar diameter: 34mm, spindle power: 11kW, control: M730UM with CELOS ERGOline Touch control panel for networking with CAD/CAM and MAPPS system, operating hours: 12,573h, including 3x external turning holder, 3x boring bar holder, 1x angular offset AGW, 1x axial AGW, 1x spindle insert tube, collet chuck for the main spindle, jaw chuck for the counter chucks, documentation, main and counter spindle with integrated motor spindle and increased speed, can be inspected on site.
Article: Programme-controlled automatic latheManufacturer: TraubType: TF60 / 140Yob: 1978Bar automatPlease, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com ... más información
Center height: 360mm, bed width: 430mm, turning length: 1500mm, with documentation. ... más información
number of spindles:8 spindle passage:32 mmArticle: cam-controlled multi-spindle automatic latheManufacturer: SchütteType: AF32 S DNTYob: 1994Eight-spindle automatic lathe with 8 main spindlesmax. nominal diameter D=32mmcontrol: Siemens SIMATIC S7electronic cam control Balluffgripper in position 8 for backworkingCNC cross slide position 6CNC cross slide position 7Workpiece beltCoolant cooling SchimpkeChip conveyor with magnetic separatorTapping couplingsThe tooling shown may differ from the scope of delivery!Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
X-travel: 425mm, swing/ over bed/ slide: 970/ 710/ 370mm, spindle rotational speed: 125-1480/min, max. load: 3t, width: 2630mm, height: 2170mm, with tools, was maintained regularly, an inspection is possible. ... más información
A single-spindle pick-up lathe is available, max. swivel diameter: 250mm, working spindle nose: ASA 6 inch, spindle in front bearing: 110mm, max. chuck diameter: 250mm, weight: 13t, operating hours: approx. 82,400h, with documentation, an on-site inspection is possible. ... más información
Quality unchecked. Diameter: 124mm ... más información
A single-spindle pick-up lathe is available, max. swivel diameter: 130mm, spindle in front bearing: 90mm, max. chuck diameter: 160mm, weight: 10t, operating hours: approx. 88,000h, with documentation, an on-site inspection is possible. ... más información
Turning length: 250mm, center height: 240mm, swing/ over slide: 280/ 185mm, operational hours counter: 55,325h, with documentation, without tools, was maintained regularly, an inspection is possible. ... más información
Connected load: 58.5kVA, operational hours counter: 50,559h, with documentation, without tools, was maintained regularly, an inspection is possible. ... más información
number of spindles:6 spindle passage:51 mmArticle: CNC-controlled multi-spindle automatic latheManufacturer: SchütteType: S51 PCYob: 2008Six-spindle automatic lathe with 6 main spindlesmax. nominal diameter D=51mmhirth-coupled spindle drum,Control: Software SICS 2000 / Windows 2000 / Beckhoff TwincatPosition I: cross slide X-I; longitudinal slide Z-IPosition II: compound slide cross XZ-II; longitudinal slide Z-IIPosition III: compound slide cross XZ-III; longitudinal slide Z-IIIPosition IV: compound slide cross XZ-IV; compound slide longitudinal ZX-IVPosition V: cross slide X-V; compound slide longitudinal ZX-VPosition VI: cross slide X-VI; pick up for rear machining; second cross slide XX-VICoolant tank with hinged belt chip conveyor;Coolant pump with two pressure connections: q= 180 l/min, p1 bar; q=70 l/min, p=7 bar;Workpiece collecting device with belt conveyor (low-damage workpiece ...
X-travel: 520mm, z-travel: 200mm, circumferential diameter: 325mm, spindle bore: 60mm, rapid traverse: 30m/min, number of tool positions: 25, control: Index C200-4, including three-jaw chuck, pallet circulation system, coolant tank, scraper belt conveyor, tool holder and documentation, on-site inspection is possible.
number of spindles:8 spindle passage:32 mmArticle: cam-controlled multi-spindle automatic lathe Manufacturer: SchütteType: AF32 DntYob: 1993eight-spindle automatic latheeight main spindlesfor bars up to D=32mmModernized control: Siemens SinumerikMotors: renewed modern motors suitable for modernized control systemElectronic trip dog control: BalluffCNC cross slide position 5 crossCNC cross slide position 6 crossPreparation for gripper in position 8 (gripper optional)Independent feedsThread cutting couplingsintegrated bar loader: Pietro CUCCHI; type: rack type magazineThe scope of delivery regarding the tooling equipment could be different like pictures.
Quality unchecked. Pick up by appointment only! Equipped with powered tools and bar feeder! ... más información
Center width: 1500mm, max. chuck diameter: 200/240mm, motor power: 4kW, including steady rest, on-site inspection is possible. ... más información
Spindle opening: 2x 65mm, turning diameter: 230mm, turning length: 673mm, turning chuck diameter: 210mm, max. rotational speed: 5000/min, spindle power: 11kW, controls: FANUC Series 31i-MODEL B, connected load: 60kVA, weight: 8.5t, operational hours counter: 9860h, with documentation, accessories, various tools, clamping devices and bar loader, without robot, was maintained regularly, an inspection is possible.
Article: CNC LatheManufacturer: SpinnerType: SB-CNCYear of construction: currently not known, estimated 1990Control: SIEMENS SINUMERIK 810TBar passage: measured approx. Ø 34.6mm -> nominal Ø 32mm?Tool turret: Manufacturer SauterMachine has processed plasticThe scope of delivery regarding the tooling equipment could be different like pictures.Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com